On Thu, 2015-07-30 at 14:57 +0200, Maarten Lankhorst wrote:
> Right now dpms callbacks can still fiddle with the connector state,
> but it can only turn connectors off.
>
> This is remediated by only checking crtc->state->active when the
> connector is active, and ignore crtc->state->active when the
> connector is off.
>
> connectors_active is no longer checked, and will be removed later
> in this series together with dpms.
>
> Another check for !encoder->crtc is performed by check_encoder_state
> too, so it can be removed.
>
> Changes since v1:
> - Add commit message.
> - rename state to old_state.
> - Move deletion of mst_port check to mst patch.
I didn't see the respin of that patch, so this one didn't apply cleanly for me.
I had to edit the
mst patch first.
Reviewed-by: Ander Conselvan de Oliveira <conselv...@gmail.com>
>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 66
> +++++++++++++++++-------------------
> 1 file changed, 32 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 77b4da7e698c..876071ad4681 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6360,38 +6360,33 @@ static void intel_encoder_dpms(struct intel_encoder
> *encoder, int mode)
> * internal consistency). */
> static void intel_connector_check_state(struct intel_connector *connector)
> {
> - if (connector->get_hw_state(connector)) {
> - struct intel_encoder *encoder = connector->encoder;
> - struct drm_crtc *crtc;
> - bool encoder_enabled;
> - enum pipe pipe;
> + struct drm_crtc *crtc = connector->base.state->crtc;
>
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> - connector->base.base.id,
> - connector->base.name);
> + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> + connector->base.base.id,
> + connector->base.name);
>
> - I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
> - "wrong connector dpms state\n");
> - I915_STATE_WARN(connector->base.encoder != &encoder->base,
> - "active connector not linked to encoder\n");
> + if (connector->get_hw_state(connector)) {
> + struct drm_encoder *encoder = &connector->encoder->base;
> + struct drm_connector_state *conn_state = connector->base.state;
>
> - if (encoder) {
> - I915_STATE_WARN(!encoder->connectors_active,
> - "encoder->connectors_active not set\n");
> + I915_STATE_WARN(!crtc,
> + "connector enabled without attached crtc\n");
>
> - encoder_enabled = encoder->get_hw_state(encoder, &pipe);
> - I915_STATE_WARN(!encoder_enabled, "encoder not
> enabled\n");
> - if (I915_STATE_WARN_ON(!encoder->base.crtc))
> - return;
> + if (!crtc)
> + return;
>
> - crtc = encoder->base.crtc;
> + I915_STATE_WARN(!crtc->state->active,
> + "connector is active, but attached crtc isn't\n");
>
> - I915_STATE_WARN(!crtc->state->enable,
> - "crtc not enabled\n");
> - I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not
> active\n");
> - I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
> - "encoder active on the wrong pipe\n");
> - }
> + I915_STATE_WARN(conn_state->best_encoder != encoder,
> + "atomic encoder doesn't match attached encoder\n");
> +
> + I915_STATE_WARN(conn_state->crtc != encoder->crtc,
> + "attached encoder crtc differs from connector crtc\n");
> + } else {
> + I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
> + "best encoder set without crtc!\n");
> }
> }
>
> @@ -12699,20 +12694,23 @@ static void check_wm_state(struct drm_device *dev)
> }
>
> static void
> -check_connector_state(struct drm_device *dev)
> +check_connector_state(struct drm_device *dev,
> + struct drm_atomic_state *old_state)
> {
> - struct intel_connector *connector;
> + struct drm_connector_state *old_conn_state;
> + struct drm_connector *connector;
> + int i;
>
> - for_each_intel_connector(dev, connector) {
> - struct drm_encoder *encoder = connector->base.encoder;
> - struct drm_connector_state *state = connector->base.state;
> + for_each_connector_in_state(old_state, connector, old_conn_state, i) {
> + struct drm_encoder *encoder = connector->encoder;
> + struct drm_connector_state *state = connector->state;
>
> /* This also checks the encoder/connector hw state with the
> * ->get_hw_state callbacks. */
> - intel_connector_check_state(connector);
> + intel_connector_check_state(to_intel_connector(connector));
>
> I915_STATE_WARN(state->best_encoder != encoder,
> - "connector's staged encoder doesn't match current
> encoder\n");
> + "connector's atomic encoder doesn't match legacy
> encoder\n");
> }
> }
>
> @@ -12903,7 +12901,7 @@ intel_modeset_check_state(struct drm_device *dev,
> struct drm_atomic_state *old_state)
> {
> check_wm_state(dev);
> - check_connector_state(dev);
> + check_connector_state(dev, old_state);
> check_encoder_state(dev);
> check_crtc_state(dev);
> check_shared_dpll_state(dev);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
