On Tue, Jul 14, 2015 at 11:18:50AM +0530, Sonika Jindal wrote:
> As per bspec, on BXT A0/A1, sw needs to activate DDIA HPD logic
> and interrupts to check the external panel connection and DDIC HPD
> logic for edp panel.
>
> Signed-off-by: Sonika Jindal <sonika.jin...@intel.com>
Yeah I think this is much clearer. Will pull in as soon as there's an r-b
on these two.
Thanks, Daniel
> ---
> drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++++++--
> drivers/gpu/drm/i915/intel_hdmi.c | 9 ++++++++-
> 2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 7b54b9d..c32f3d3 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5869,10 +5869,24 @@ intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> /* Set up the hotplug pin. */
> switch (port) {
> case PORT_A:
> - intel_encoder->hpd_pin = HPD_PORT_A;
> + /*
> + * On BXT A0/A1, sw needs to activate DDIC HPD logic and
> + * interrupts to check the eDP panel connection.
> + */
> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
> + intel_encoder->hpd_pin = HPD_PORT_C;
> + else
> + intel_encoder->hpd_pin = HPD_PORT_A;
> break;
> case PORT_B:
> - intel_encoder->hpd_pin = HPD_PORT_B;
> + /*
> + * On BXT A0/A1, sw needs to activate DDIA HPD logic and
> + * interrupts to check the external panel connection.
> + */
> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
> + intel_encoder->hpd_pin = HPD_PORT_A;
> + else
> + intel_encoder->hpd_pin = HPD_PORT_B;
> break;
> case PORT_C:
> intel_encoder->hpd_pin = HPD_PORT_C;
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> index 44e7160..121e626 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -2011,7 +2011,14 @@ void intel_hdmi_init_connector(struct
> intel_digital_port *intel_dig_port,
> intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT;
> else
> intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
> - intel_encoder->hpd_pin = HPD_PORT_B;
> + /*
> + * On BXT A0/A1, sw needs to activate DDIA HPD logic and
> + * interrupts to check the external panel connection.
> + */
> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
> + intel_encoder->hpd_pin = HPD_PORT_A;
> + else
> + intel_encoder->hpd_pin = HPD_PORT_B;
> break;
> case PORT_C:
> if (IS_BROXTON(dev_priv))
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
