On Mon, Jul 06, 2015 at 02:31:56PM +0530, Jindal, Sonika wrote:
>
>
> On 7/6/2015 2:19 PM, Ville Syrjälä wrote:
> > On Mon, Jul 06, 2015 at 11:23:53AM +0530, Sonika Jindal wrote:
> >> Writing to PCH_PORT_HOTPLUG for each interrupt is not required.
> >> Handle it only if hpd has actually occurred like we handle other
> >> interrupts.
> >>
> >> Signed-off-by: Sonika Jindal <sonika.jin...@intel.com>
> >> ---
> >> Hi,
> >>
> >> I see we don't check for hotplug_trigger before processing the HPD for any
> >> of the platform. Is there any reason for this?
> >> For SKL, if I let write to PCH_PORT_HOTPLUG happen for all interrupts,
> >> somehow this register gets an invalid value at one point and it zeroes it
> >> out.
> >> If I put this check before handling HPD, hotplug behaves fine.
> >> Please let me know if you see any issue with this approach.
> >>
> >> Thanks,
> >> Sonika
> >>
> >> drivers/gpu/drm/i915/i915_irq.c | 11 ++++++-----
> >> 1 file changed, 6 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/i915_irq.c
> >> b/drivers/gpu/drm/i915/i915_irq.c
> >> index a6fbe64..2d47372 100644
> >> --- a/drivers/gpu/drm/i915/i915_irq.c
> >> +++ b/drivers/gpu/drm/i915/i915_irq.c
> >> @@ -1760,11 +1760,12 @@ static void cpt_irq_handler(struct drm_device
> >> *dev, u32 pch_iir)
> >> u32 dig_hotplug_reg;
> >> u32 pin_mask, long_mask;
> >>
> >> - dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> - I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> -
> >> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> >> dig_hotplug_reg, hpd_cpt);
> >> - intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + if (hotplug_trigger) {
> >> + dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> + I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> + pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> >> dig_hotplug_reg, hpd_cpt);
> >> + intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + }
> >
> > Deja vu. I think I have the same patch (also for IBX) in my stalled
> > (and never posted) port A HPD branch. So yeah, I think this
> > makes sense.
> >
> > You can also move the dig_hotplug_reg, pin_mask, and long_mask declarations
> > into the if block since they're not needed elsewhere.
> Sure. Do you think I should add this for ibx as well?
Yes.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
