On Thu, Jun 18, 2015 at 09:38:05AM -0700, Matt Roper wrote:
> From: Bob Paauwe <bob.j.paa...@intel.com>
>
> The registers and process differ from other platforms.
>
> v2(Matt): Return 19.2 MHz when DE PLL is disabled (Ville)
>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Imre Deak <imre.d...@intel.com>
> Signed-off-by: Bob Paauwe <bob.j.paa...@intel.com>
> Signed-off-by: Matt Roper <matthew.d.ro...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 3ee7dbc..294c4e4 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6689,6 +6689,34 @@ static int skylake_get_display_clock_speed(struct
> drm_device *dev)
> return 24000;
> }
>
> +static int broxton_get_display_clock_speed(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + uint32_t cdctl = I915_READ(CDCLK_CTL);
> + uint32_t pll_freq = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
> + uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
> +
> + if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
> + return 19200;
> +
> + switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
> + case BXT_CDCLK_CD2X_DIV_SEL_1:
> + if (pll_freq == BXT_DE_PLL_RATIO(60)) /* PLL freq = 1152MHz */
> + return 576000;
> + else /* PLL freq = 1248MHz */
> + return 624000;
> + case BXT_CDCLK_CD2X_DIV_SEL_1_5:
> + return 384000;
> + case BXT_CDCLK_CD2X_DIV_SEL_2:
> + return 288000;
> + case BXT_CDCLK_CD2X_DIV_SEL_4:
> + return 144000;
> + }
I'd try write this in a way that makes less assumptions about the
hardware state, so that it would also catch misprogramming.
Maybe something like this:
freq = 19200 * (pll_freq & BXT_DE_PLL_RATIO_MASK) / 2;
switch (...) {
case BXT_CDCLK_CD2X_DIV_SEL_1:
return freq;
case BXT_CDCLK_CD2X_DIV_SEL_1_5:
return freq * 3 / 2;
...
> +
> + /* error case, assume higer PLL freq. */
> + return 624000;
> +}
> +
> static int broadwell_get_display_clock_speed(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -14715,6 +14743,9 @@ static void intel_init_display(struct drm_device *dev)
> if (IS_SKYLAKE(dev))
> dev_priv->display.get_display_clock_speed =
> skylake_get_display_clock_speed;
> + else if (IS_BROXTON(dev))
> + dev_priv->display.get_display_clock_speed =
> + broxton_get_display_clock_speed;
> else if (IS_BROADWELL(dev))
> dev_priv->display.get_display_clock_speed =
> broadwell_get_display_clock_speed;
> --
> 1.8.5.1
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
