On 19/06/2015 19:09, Chris Wilson wrote:
On Fri, Jun 19, 2015 at 06:37:14PM +0100, Arun Siluvery wrote:
In Indirect context w/a batch buffer,
WaClearSlmSpaceAtContextSwitch

This WA performs writes to scratch page so it must be valid, this check
is performed before initializing the batch with this WA.

v2: s/PIPE_CONTROL_FLUSH_RO_CACHES/PIPE_CONTROL_FLUSH_L3 (Ville)

Cc: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gor...@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barba...@intel.com>
Signed-off-by: Arun Siluvery <arun.siluv...@linux.intel.com>
---
  drivers/gpu/drm/i915/i915_reg.h  |  1 +
  drivers/gpu/drm/i915/intel_lrc.c | 16 ++++++++++++++++
  2 files changed, 17 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d14ad20..7637e64 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -410,6 +410,7 @@
  #define   DISPLAY_PLANE_A           (0<<20)
  #define   DISPLAY_PLANE_B           (1<<20)
  #define GFX_OP_PIPE_CONTROL(len)      ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2))
+#define   PIPE_CONTROL_FLUSH_L3                                (1<<27)
  #define   PIPE_CONTROL_GLOBAL_GTT_IVB                 (1<<24) /* gen7+ */
  #define   PIPE_CONTROL_MMIO_WRITE                     (1<<23)
  #define   PIPE_CONTROL_STORE_DATA_INDEX                       (1<<21)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 3e7aaa9..664455c 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1137,6 +1137,7 @@ static int gen8_init_indirectctx_bb(struct 
intel_engine_cs *ring,
                                    uint32_t *const batch,
                                    uint32_t *offset)
  {
+       uint32_t scratch_addr;
        uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS);

        /* WaDisableCtxRestoreArbitration:bdw,chv */
@@ -1165,6 +1166,21 @@ static int gen8_init_indirectctx_bb(struct 
intel_engine_cs *ring,
                wa_ctx_emit(batch, l3sqc4_flush & 
~GEN8_LQSC_FLUSH_COHERENT_LINES);
        }

+       /* WaClearSlmSpaceAtContextSwitch:bdw,chv */
+       /* Actual scratch location is at 128 bytes offset */
+       scratch_addr = ring->scratch.gtt_offset + 2*CACHELINE_BYTES;
+       scratch_addr |= PIPE_CONTROL_GLOBAL_GTT;

I thought this bit was now mbz - that's how we treat it elsewhere e.g.
gen8_emit_flush_render, and that the address has to be naturally aligned
for the target write. (Similar bit in patch 6 fwiw.)
you are correct, this bit is mbz.

Daniel, could you please remove this line when applying patches?
sorry for additional work.

>> +      scratch_addr |= PIPE_CONTROL_GLOBAL_GTT;

regards
Arun

-Chris


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to