On Wed, 03 Jun 2015, "Kannan, Vandana" <vandana.kan...@intel.com> wrote:
> On 5/26/2015 5:50 PM, Sonika Jindal wrote:
>> BXT supports following intermediate link rates for edp:
>> 2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
>> Adding support for programming the intermediate rates.
>>
>> v2: Adding clock in bxt_clk_div struct and then look for the entry with
>> required rate (Ville)
>> v3: 'clock' has the selected value, no need to use link_bw or rate_select
>> for selecting pll(Ville)
>> v4: Make bxt_dp_clk_val const and remove size (Ville)
>> v5: Rebased
>> v6: Removed setting of vco while rebasing in v5, adding it back
>>
>> Signed-off-by: Sonika Jindal <sonika.jin...@intel.com>
>> Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>(v4)
Pushed to drm-intel-next-queued, thanks for the patch and review.
BR,
Jani.
>> ---
>> drivers/gpu/drm/i915/intel_ddi.c | 39
>> ++++++++++++++++----------------------
>> drivers/gpu/drm/i915/intel_dp.c | 7 ++++++-
>> 2 files changed, 22 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
>> b/drivers/gpu/drm/i915/intel_ddi.c
>> index cacb07b..2a2518d 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -1334,6 +1334,7 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
>>
>> /* bxt clock parameters */
>> struct bxt_clk_div {
>> + int clock;
>> uint32_t p1;
>> uint32_t p2;
>> uint32_t m2_int;
>> @@ -1343,14 +1344,14 @@ struct bxt_clk_div {
>> };
>>
>> /* pre-calculated values for DP linkrates */
>> -static struct bxt_clk_div bxt_dp_clk_val[7] = {
>> - /* 162 */ {4, 2, 32, 1677722, 1, 1},
>> - /* 270 */ {4, 1, 27, 0, 0, 1},
>> - /* 540 */ {2, 1, 27, 0, 0, 1},
>> - /* 216 */ {3, 2, 32, 1677722, 1, 1},
>> - /* 243 */ {4, 1, 24, 1258291, 1, 1},
>> - /* 324 */ {4, 1, 32, 1677722, 1, 1},
>> - /* 432 */ {3, 1, 32, 1677722, 1, 1}
>> +static const struct bxt_clk_div bxt_dp_clk_val[] = {
>> + {162000, 4, 2, 32, 1677722, 1, 1},
>> + {270000, 4, 1, 27, 0, 0, 1},
>> + {540000, 2, 1, 27, 0, 0, 1},
>> + {216000, 3, 2, 32, 1677722, 1, 1},
>> + {243000, 4, 1, 24, 1258291, 1, 1},
>> + {324000, 4, 1, 32, 1677722, 1, 1},
>> + {432000, 3, 1, 32, 1677722, 1, 1}
>> };
>>
>> static bool
>> @@ -1390,22 +1391,14 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>> vco = best_clock.vco;
>> } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
>> intel_encoder->type == INTEL_OUTPUT_EDP) {
>> - struct drm_encoder *encoder = &intel_encoder->base;
>> - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>> + int i;
>>
>> - switch (intel_dp->link_bw) {
>> - case DP_LINK_BW_1_62:
>> - clk_div = bxt_dp_clk_val[0];
>> - break;
>> - case DP_LINK_BW_2_7:
>> - clk_div = bxt_dp_clk_val[1];
>> - break;
>> - case DP_LINK_BW_5_4:
>> - clk_div = bxt_dp_clk_val[2];
>> - break;
>> - default:
>> - clk_div = bxt_dp_clk_val[0];
>> - DRM_ERROR("Unknown link rate\n");
>> + clk_div = bxt_dp_clk_val[0];
>> + for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) {
>> + if (bxt_dp_clk_val[i].clock == clock) {
>> + clk_div = bxt_dp_clk_val[i];
>> + break;
>> + }
>> }
>> vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
>> }
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c
>> b/drivers/gpu/drm/i915/intel_dp.c
>> index abd442a..bd0f958 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -91,6 +91,8 @@ static const struct dp_link_dpll chv_dpll[] = {
>> { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
>> };
>>
>> +static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
>> + 324000, 432000, 540000 };
>> static const int skl_rates[] = { 162000, 216000, 270000,
>> 324000, 432000, 540000 };
>> static const int chv_rates[] = { 162000, 202500, 210000, 216000,
>> @@ -1170,7 +1172,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const
>> int **sink_rates)
>> static int
>> intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
>> {
>> - if (IS_SKYLAKE(dev)) {
>> + if (IS_BROXTON(dev)) {
>> + *source_rates = bxt_rates;
>> + return ARRAY_SIZE(bxt_rates);
>> + } else if (IS_SKYLAKE(dev)) {
>> *source_rates = skl_rates;
>> return ARRAY_SIZE(skl_rates);
>> } else if (IS_CHERRYVIEW(dev)) {
>>
> Reviewed-by: Vandana Kannan <vandana.kan...@intel.com>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
