Having a single path for everything makes it a lot easier to keep
crtc_state->active in sync with intel_crtc->active.
A crtc cannot be changed to active when not enabled, because it means
no mode is set and no connectors are connected.
This should also make intel_crtc->active match crtc_state->active.
Changes since v1:
- Reworded commit message, there's no intel_crtc_toggle.
Changes since v2:
- Change some callers of intel_crtc_control to intel_display_suspend.
Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 18 ++++++++++--
drivers/gpu/drm/i915/intel_display.c | 54 +++++++++++++-----------------------
drivers/gpu/drm/i915/intel_drv.h | 1 -
3 files changed, 35 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index a32b669bab89..8bf21e8abd93 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3606,12 +3606,18 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct
drm_device *dev)
*/
if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
!crtc->config->pch_pfit.enabled) {
+ bool active = crtc->active;
+
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
crtc->config->pch_pfit.force_thru = true;
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
@@ -3630,12 +3636,18 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct
drm_device *dev)
* routing.
*/
if (crtc->config->pch_pfit.force_thru) {
- crtc->config->pch_pfit.force_thru = false;
+ bool active = crtc->active;
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
+ crtc->config->pch_pfit.force_thru = false;
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 8d50c4ca561f..7d386561531f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3189,19 +3189,6 @@ static void intel_update_primary_planes(struct
drm_device *dev)
}
}
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (!crtc->active)
- return;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
-}
-
void intel_prepare_reset(struct drm_device *dev)
{
/* no reset support for gen2 */
@@ -3213,7 +3200,6 @@ void intel_prepare_reset(struct drm_device *dev)
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
@@ -6036,26 +6022,29 @@ void intel_crtc_control(struct drm_crtc *crtc, bool
enable)
enum intel_display_power_domain domain;
unsigned long domains;
+ if (enable == intel_crtc->active)
+ return;
+
+ if (enable && !crtc->state->enable)
+ return;
+
+ crtc->state->active = enable;
if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
+ domains = get_crtc_power_domains(crtc);
+ for_each_power_domain(domain, domains)
+ intel_display_power_get(dev_priv, domain);
+ intel_crtc->enabled_power_domains = domains;
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
+ dev_priv->display.crtc_enable(crtc);
+ intel_crtc_enable_planes(crtc);
} else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
}
@@ -6072,8 +6061,6 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
enable |= intel_encoder->connectors_active;
intel_crtc_control(crtc, enable);
-
- crtc->state->active = enable;
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -14565,8 +14552,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_control(&crtc->base, false);
crtc->plane = plane;
/* ... and break all links. */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c24d670529e3..14685abf1b3d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -994,7 +994,6 @@ void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
void intel_display_suspend(struct drm_device *dev);
void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
