The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warnings.
Fix this by not enabling audio on port A on non-DDI platforms. The check could be made more specific, but this corresponds to the audio codec enabling code which emits the warning for port A. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958 Reported-and-tested-by: Chris Bainbridge <chris.bainbri...@gmail.com> Cc: sta...@vger.kernel.org Signed-off-by: Jani Nikula <jani.nik...@intel.com> --- drivers/gpu/drm/i915/intel_dp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 937ba31d8dde..fa71fb4d6542 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1355,7 +1355,8 @@ intel_dp_compute_config(struct intel_encoder *encoder, pipe_config->has_dp_encoder = true; pipe_config->has_drrs = false; - pipe_config->has_audio = intel_dp->has_audio; + if (HAS_DDI(dev) || port != PORT_A) + pipe_config->has_audio = intel_dp->has_audio; if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { intel_fixed_panel_mode(intel_connector->panel.fixed_mode, @@ -2228,7 +2229,7 @@ static void intel_dp_get_config(struct intel_encoder *encoder, int dotclock; tmp = I915_READ(intel_dp->output_reg); - if (tmp & DP_AUDIO_OUTPUT_ENABLE) + if (port != PORT_A && tmp & DP_AUDIO_OUTPUT_ENABLE) pipe_config->has_audio = true; if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { -- 2.1.4 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
