Added intel_atomic_setup_scalers to setup scalers based on
staged scaling requests from a crtc and its planes. If staged
requests are supportable, this function assigns scalers to
requested planes and crtc. Note that the scaler assignement
itself is staged into crtc_state and respective plane_states
for later commit after all checks have been done.
overall high level flow:
- scaler requests are staged into crtc_state by planes/crtc
- check whether staged scaling requests can be supported
- add planes using scalers that aren't in current transaction
- assign scalers to requested users
- as part of plane commit, scalers will be committed
(i.e., either attached or detached) to respective planes in hw
- as part of crtc_commit, scaler will be either attached or detached
to crtc in hw
crtc_compute_config calls intel_atomic_setup_scalers() to start
scaler assignments as per scaler state in crtc config. This call
should be moved to atomic crtc once it is available.
v2:
-removed a log message (me)
-changed input parameter to crtc_state (me)
v3:
-remove assigning plane_state returned by drm_atomic_get_plane_state (Matt)
-fail if there is an error from drm_atomic_get_plane_state (Matt)
v4:
-changes to align with updated scaler structure (Matt, me)
Signed-off-by: Chandra Konduru <chandra.kond...@intel.com>
---
drivers/gpu/drm/i915/intel_atomic.c | 137 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 10 ++-
drivers/gpu/drm/i915/intel_drv.h | 3 +
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c
b/drivers/gpu/drm/i915/intel_atomic.c
index 3903b90..ac317b4 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -241,3 +241,140 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
{
drm_atomic_helper_crtc_destroy_state(crtc, state);
}
+
+/**
+ * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
+ * @dev: DRM device
+ * @crtc: intel crtc
+ * @crtc_state: incoming crtc_state to validate and setup scalers
+ *
+ * This function sets up scalers based on staged scaling requests for
+ * a @crtc and its planes. It is called from crtc level check path. If request
+ * is a supportable request, it attaches scalers to requested planes and crtc.
+ *
+ * This function takes into account the current scaler(s) in use by any planes
+ * not being part of this atomic state
+ *
+ * Returns:
+ * 0 - scalers were setup succesfully
+ * error code - otherwise
+ */
+int intel_atomic_setup_scalers(struct drm_device *dev,
+ struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state)
+{
+ struct drm_plane *plane = NULL;
+ struct intel_plane *intel_plane;
+ struct intel_plane_state *plane_state = NULL;
+ struct intel_crtc_scaler_state *scaler_state;
+ struct drm_atomic_state *drm_state;
+ int num_scalers_need;
+ int i, j;
+
+ if (INTEL_INFO(dev)->gen < 9 || !intel_crtc || !crtc_state)
+ return 0;
+
+ scaler_state = &crtc_state->scaler_state;
+ drm_state = crtc_state->base.state;
+
+ num_scalers_need = hweight32(scaler_state->scaler_users);
+ DRM_DEBUG_KMS("crtc_state = %p need = %d avail = %d scaler_users =
0x%x\n",
+ crtc_state, num_scalers_need, intel_crtc->num_scalers,
+ scaler_state->scaler_users);
+
+ /*
+ * High level flow:
+ * - staged scaler requests are already in scaler_state->scaler_users
+ * - check whether staged scaling requests can be supported
+ * - add planes using scalers that aren't in current transaction
+ * - assign scalers to requested users
+ * - as part of plane commit, scalers will be committed
+ * (i.e., either attached or detached) to respective planes in hw
+ * - as part of crtc_commit, scaler will be either attached or detached
+ * to crtc in hw
+ */
+
+ /* fail if required scalers > available scalers */
+ if (num_scalers_need > intel_crtc->num_scalers){
+ DRM_DEBUG_KMS("Too many scaling requests %d > %d\n",
+ num_scalers_need, intel_crtc->num_scalers);
+ return -EINVAL;
+ }
+
+ /* walkthrough scaler_users bits and start assigning scalers */
+ for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
+ int *scaler_id;
+
+ /* skip if scaler not required */
+ if (!(scaler_state->scaler_users & (1 << i)))
+ continue;
+
+ if (i == SKL_CRTC_INDEX) {
+ /* panel fitter case: assign as a crtc scaler */
+ scaler_id = &scaler_state->scaler_id;
+ } else {
+ if (!drm_state)
+ continue;
+
+ /* plane scaler case: assign as a plane scaler */
+ /* find the plane that set the bit as scaler_user */
+ plane = drm_state->planes[i];
+
+ /*
+ * to enable/disable hq mode, add planes that are using
scaler
+ * into this transaction
+ */
+ if (!plane) {
+ struct drm_plane_state *state;
+ plane = drm_plane_from_index(dev, i);
+ state = drm_atomic_get_plane_state(drm_state,
plane);
+ if (IS_ERR(state)) {
+ DRM_DEBUG_KMS("Failed to add [PLANE:%d]
to drm_state\n",
+ plane->base.id);
+ return PTR_ERR(state);
+ }
+ }
+
+ intel_plane = to_intel_plane(plane);
+
+ /* plane on different crtc cannot be a scaler user of
this crtc */
+ if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
+ continue;
+ }
+
+ plane_state =
to_intel_plane_state(drm_state->plane_states[i]);
+ scaler_id = &plane_state->scaler_id;
+ }
+
+ if (*scaler_id < 0) {
+ /* find a free scaler */
+ for (j = 0; j < intel_crtc->num_scalers; j++) {
+ if (!scaler_state->scalers[j].in_use) {
+ scaler_state->scalers[j].in_use = 1;
+ *scaler_id =
scaler_state->scalers[j].id;
+ DRM_DEBUG_KMS("Attached scaler id %u.%u
to %s:%d\n",
+ intel_crtc->pipe,
+ i == SKL_CRTC_INDEX ?
scaler_state->scaler_id :
+ plane_state->scaler_id,
+ i == SKL_CRTC_INDEX ? "CRTC" :
"PLANE",
+ i == SKL_CRTC_INDEX ?
intel_crtc->base.base.id :
+ plane->base.id);
+ break;
+ }
+ }
+ }
+
+ if (WARN_ON(*scaler_id < 0)) {
+ DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n",
+ i == SKL_CRTC_INDEX ? "CRTC" : "PLANE",
+ i == SKL_CRTC_INDEX ?
intel_crtc->base.base.id:plane->base.id);
+ continue;
+ }
+
+ /* set scaler mode */
+ scaler_state->scalers[*scaler_id].mode = (num_scalers_need ==
1) ?
+ PS_SCALER_MODE_HQ : PS_SCALER_MODE_DYN;
+ }
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index f1051f0..9691768 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5809,6 +5809,7 @@ static int intel_crtc_compute_config(struct intel_crtc
*crtc,
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *adjusted_mode =
&pipe_config->base.adjusted_mode;
+ int ret;
/* FIXME should check pixel clock limits on all platforms */
if (INTEL_INFO(dev)->gen < 4) {
@@ -5863,7 +5864,14 @@ static int intel_crtc_compute_config(struct intel_crtc
*crtc,
if (pipe_config->has_pch_encoder)
return ironlake_fdi_compute_config(crtc, pipe_config);
- return 0;
+ /* FIXME: remove below call once atomic mode set is place and all crtc
+ * related checks called from atomic_crtc_check function */
+ ret = 0;
+ DRM_DEBUG_KMS("intel_crtc = %p drm_state (pipe_config->base.state) =
%p\n",
+ crtc, pipe_config->base.state);
+ ret = intel_atomic_setup_scalers(dev, crtc, pipe_config);
+
+ return ret;
}
static int skylake_get_display_clock_speed(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index adca692..f9614fb 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1382,6 +1382,9 @@ intel_atomic_get_crtc_state(struct drm_atomic_state
*state,
return to_intel_crtc_state(crtc_state);
}
+int intel_atomic_setup_scalers(struct drm_device *dev,
+ struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state);
/* intel_atomic_plane.c */
struct intel_plane_state *intel_create_plane_state(struct drm_plane *plane);
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
