On Tue, Mar 31, 2015 at 10:15:00AM -0700, Todd Previte wrote:
> The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1
> specifies that repeated AUX transactions after a failure (no response /
> invalid response) must have a minimum delay of 400us before the resend can
> occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically.
>
> V2:
> - Changed udelay() to usleep_range()
> V3:
> - Removed extraneous check for timeout
> - Updated comment to reflect this change
>
> Signed-off-by: Todd Previte <tprev...@gmail.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index ed2f60c..dc87276 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -877,9 +877,15 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
> DP_AUX_CH_CTL_TIME_OUT_ERROR |
> DP_AUX_CH_CTL_RECEIVE_ERROR);
>
> - if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
> - DP_AUX_CH_CTL_RECEIVE_ERROR))
> + /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2
> + 400us delay required for errors and timeouts
> + Timeout errors from the HW already meet this
> + requirement so skip to next iteration
> + */
Weird format for multi line comment.
> + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
> + usleep_range(400, 500);
> continue;
> + }
Where did the DP_AUX_CH_CTL_TIME_OUT_ERROR handling go?
> if (status & DP_AUX_CH_CTL_DONE)
> break;
> }
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
