From: Jeff McGee <jeff.mc...@intel.com>
Collect the currently enabled counts of slice, subslice, and
execution units using the power gate control ack message
registers specific to Cherryview.
Slice/subslice/EU info and hardware status can now be
determined for CHV, so allow the debugfs SSEU status dump
to proceed for CHV devices.
Signed-off-by: Jeff McGee <jeff.mc...@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 31 +++++++++++++++++++++++++++++--
drivers/gpu/drm/i915/i915_reg.h | 11 +++++++++++
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index 94b3984..e42e79a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4362,7 +4362,7 @@ static int i915_sseu_status(struct seq_file *m, void
*unused)
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned int s_tot = 0, ss_tot = 0, ss_per = 0, eu_tot = 0, eu_per = 0;
- if (INTEL_INFO(dev)->gen < 9)
+ if ((INTEL_INFO(dev)->gen < 8) || IS_BROADWELL(dev))
return -ENODEV;
seq_puts(m, "SSEU Device Info\n");
@@ -4384,7 +4384,34 @@ static int i915_sseu_status(struct seq_file *m, void
*unused)
yesno(INTEL_INFO(dev)->has_eu_pg));
seq_puts(m, "SSEU Device Status\n");
- if (IS_SKYLAKE(dev)) {
+ if (IS_CHERRYVIEW(dev)) {
+ const int ss_max = 2;
+ int ss;
+ u32 sig1[ss_max], sig2[ss_max];
+
+ sig1[0] = I915_READ(CHV_POWER_SS0_SIG1);
+ sig1[1] = I915_READ(CHV_POWER_SS1_SIG1);
+ sig2[0] = I915_READ(CHV_POWER_SS0_SIG2);
+ sig2[1] = I915_READ(CHV_POWER_SS1_SIG2);
+
+ for (ss = 0; ss < ss_max; ss++) {
+ unsigned int eu_cnt;
+
+ if (sig1[ss] & CHV_SS_PG_ENABLE)
+ /* skip disabled subslice */
+ continue;
+
+ s_tot = 1;
+ ss_per++;
+ eu_cnt = ((sig1[ss] & CHV_EU08_PG_ENABLE) ? 0 : 2) +
+ ((sig1[ss] & CHV_EU19_PG_ENABLE) ? 0 : 2) +
+ ((sig1[ss] & CHV_EU210_PG_ENABLE) ? 0 : 2) +
+ ((sig2[ss] & CHV_EU311_PG_ENABLE) ? 0 : 2);
+ eu_tot += eu_cnt;
+ eu_per = max(eu_per, eu_cnt);
+ }
+ ss_tot = ss_per;
+ } else if (IS_SKYLAKE(dev)) {
const int s_max = 3, ss_max = 4;
int s, ss;
u32 s_reg[s_max], eu_reg[2*s_max], eu_mask[2];
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a8b205d..659aefc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6227,6 +6227,17 @@ enum skl_disp_power_wells {
#define GEN6_RC6 3
#define GEN6_RC7 4
+#define CHV_POWER_SS0_SIG1 0xa720
+#define CHV_POWER_SS1_SIG1 0xa728
+#define CHV_SS_PG_ENABLE (1<<1)
+#define CHV_EU08_PG_ENABLE (1<<9)
+#define CHV_EU19_PG_ENABLE (1<<17)
+#define CHV_EU210_PG_ENABLE (1<<25)
+
+#define CHV_POWER_SS0_SIG2 0xa724
+#define CHV_POWER_SS1_SIG2 0xa72c
+#define CHV_EU311_PG_ENABLE (1<<1)
+
#define GEN9_SLICE0_PGCTL_ACK 0x804c
#define GEN9_SLICE1_PGCTL_ACK 0x8050
#define GEN9_SLICE2_PGCTL_ACK 0x8054
--
2.3.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
