From: Tim Gore <tim.g...@intel.com>
The gem_render_linear_blits test tends to get oom killed
on low memory (< 4GB) Android systems. This is because the
test tries to allocate (sysinfo.totalram * 9 / 10) in
buffer objects and the remaining 10% of memory is not
always enough for the Android system.
After a discussion with Chris Wilson I have split this
test into a "basic" and an "apperture-thrash" subtest,
in the same way as gem_linear_blits. The basic test
uses just two buffer objects and the apperture-thrash
test is skipped if there is insuffiecient memory.
v2: Following comment from Chris Wilson:
a) Remove the command line option for count.
b) Add a third subtest to ensure swap is tested
Signed-off-by: Tim Gore <tim.g...@intel.com>
---
tests/gem_render_linear_blits.c | 69 +++++++++++++++++++++++++----------------
1 file changed, 43 insertions(+), 26 deletions(-)
diff --git a/tests/gem_render_linear_blits.c b/tests/gem_render_linear_blits.c
index 60ba831..cdb7c18 100644
--- a/tests/gem_render_linear_blits.c
+++ b/tests/gem_render_linear_blits.c
@@ -80,18 +80,14 @@ check_bo(int fd, uint32_t handle, uint32_t val)
}
}
-int main(int argc, char **argv)
+static void run_test (int fd, int count)
{
drm_intel_bufmgr *bufmgr;
struct intel_batchbuffer *batch;
uint32_t *start_val;
drm_intel_bo **bo;
uint32_t start = 0;
- int i, j, fd, count;
-
- igt_simple_init(argc, argv);
-
- fd = drm_open_any();
+ int i, j;
render_copy = igt_get_render_copyfunc(intel_get_drm_devid(fd));
igt_require(render_copy);
@@ -99,24 +95,6 @@ int main(int argc, char **argv)
bufmgr = drm_intel_bufmgr_gem_init(fd, 4096);
batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
- count = 0;
- if (igt_run_in_simulation())
- count = 2;
- if (argc > 1)
- count = atoi(argv[1]);
-
- if (count == 0)
- count = 3 * gem_aperture_size(fd) / SIZE / 2;
- else if (count < 2) {
- igt_warn("count must be >= 2\n");
- return 1;
- }
-
- if (count > intel_get_total_ram_mb() * 9 / 10) {
- count = intel_get_total_ram_mb() * 9 / 10;
- igt_info("not enough RAM to run test, reducing buffer count\n");
- }
-
bo = malloc(sizeof(*bo)*count);
start_val = malloc(sizeof(*start_val)*count);
@@ -128,7 +106,7 @@ int main(int argc, char **argv)
gem_write(fd, bo[i]->handle, 0, linear, sizeof(linear));
}
- igt_info("Verifying initialisation...\n");
+ igt_info("Verifying initialisation - %d buffers of %d bytes\n", count,
SIZE);
for (i = 0; i < count; i++)
check_bo(fd, bo[i]->handle, start_val[i]);
@@ -153,7 +131,7 @@ int main(int argc, char **argv)
check_bo(fd, bo[i]->handle, start_val[i]);
if (igt_run_in_simulation())
- return 0;
+ return;
igt_info("Cyclic blits, backward...\n");
for (i = 0; i < count * 4; i++) {
@@ -200,5 +178,44 @@ int main(int argc, char **argv)
for (i = 0; i < count; i++)
check_bo(fd, bo[i]->handle, start_val[i]);
+ /* release resources */
+ for (i = 0; i < count; i++) {
+ drm_intel_bo_unreference(bo[i]);
+ }
+ intel_batchbuffer_free(batch);
+ drm_intel_bufmgr_destroy(bufmgr);
+}
+
+int main(int argc, char **argv)
+{
+ static int fd = 0;
+ int count=0;
+
+ igt_subtest_init(argc, argv);
+ igt_fixture {
+ fd = drm_open_any();
+ }
+
+ igt_subtest("basic") {
+ run_test(fd, 2);
+ }
+
+ /* the rest of the tests are too long for simulation */
+ igt_skip_on_simulation();
+
+ igt_subtest("apperture-thrash") {
+ count = 3 * gem_aperture_size(fd) / SIZE / 2;
+ intel_require_memory(count, SIZE, CHECK_RAM);
+ run_test(fd, count);
+ }
+
+ igt_subtest("swap-thrash") {
+ uint64_t swap_mb = intel_get_total_swap_mb();
+ igt_require(swap_mb > 0);
+ count = ((intel_get_avail_ram_mb() + (swap_mb / 2)) *
1024*1024) / SIZE;
+ intel_require_memory(count, SIZE, CHECK_RAM | CHECK_SWAP);
+ run_test(fd, count);
+ }
+
igt_exit();
}
--
2.3.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
