From: "Lu, Han" <han...@intel.com>
This patch adds support for dumping audio registers of Skylake.
Signed-off-by: Lu, Han <han...@intel.com>
diff --git a/tools/intel_audio_dump.c b/tools/intel_audio_dump.c
index 945b136..d447902 100644
--- a/tools/intel_audio_dump.c
+++ b/tools/intel_audio_dump.c
@@ -362,6 +362,21 @@ static const char * const en_mmio_program[] = {
[1] = "Programming by MMIO debug registers",
};
+static const char * const sdi_operate_mode[] = {
+ [0] = "2T mode with sdi data held for 2 bit clocks",
+ [1] = "1T mode with sdi data held for 1 bit clock only",
+};
+
+static const char * const bclk_96mhz[] = {
+ [0] = "iDisplay audio link 96MHz bclk off",
+ [1] = "iDisplay audio link 96MHz bclk on",
+};
+
+static const char * const bclk_48mhz[] = {
+ [0] = "iDisplay audio link 48MHz bclk off",
+ [1] = "iDisplay audio link 48MHz bclk on",
+};
+
static const char * const audio_dp_dip_status[] = {
[0] = "audfc dp fifo full",
[1] = "audfc dp fifo empty",
@@ -1293,6 +1308,7 @@ static void dump_cpt(void)
#define AUD_CNTL_ST_B (AUD_CNTL_ST_A + PIPE_OFS)
#define AUD_CNTL_ST2 0x0c0
#define AUD_HDMIW_STATUS 0x0d4
+#define AUD_FREQ_CNTRL 0x900
/* Audio config registers of Haswell+ */
#define AUD_TCA_CONFIG AUD_CONFIG_A
@@ -1335,6 +1351,20 @@ static void dump_cpt(void)
#define AUD_TCA_M_CTS 0xf44
#define AUD_TCB_M_CTS 0xf54
#define AUD_TCC_M_CTS 0xf64
+#define AUD_HDA_DMA_REG 0xe00
+#define AUD_HDA_LPIB0_REG 0xe04
+#define AUD_HDA_LPIB1_REG 0xe08
+#define AUD_HDA_LPIB2_REG 0xe0c
+#define AUD_HDA_EXTRA_REG 0xe10
+#define AUD_FPGA_CRC_CTL_A 0xf14
+#define AUD_FPGA_CRC_CTL_B 0xf24
+#define AUD_FPGA_CRC_CTL_C 0xf34
+#define AUD_FPGA_CRC_RESULT_A 0xf18
+#define AUD_FPGA_CRC_RESULT_B 0xf28
+#define AUD_FPGA_CRC_RESULT_C 0xf38
+#define AUD_DFT_MVAL_REG 0xe20
+#define AUD_DFT_NVAL_REG 0xe24
+#define AUD_DFT_LOAD_REG 0xe28
/* Common functions to dump audio registers */
#define MAX_PREFIX_SIZE 128
@@ -2101,6 +2131,14 @@ static void parse_bdw_audio_chicken_bit_reg(uint32_t
dword)
printf("%s\n", OPNAME(en_mmio_program, BIT(dword, 0)));
}
+static void parse_skl_audio_freq_cntrl_reg(uint32_t dword)
+{
+ printf("\t");
+ printf("%s\n\t", OPNAME(sdi_operate_mode, BIT(dword, 15)));
+ printf("%s\n\t", OPNAME(bclk_96mhz, BIT(dword, 4)));
+ printf("%s\n", OPNAME(bclk_48mhz, BIT(dword, 3)));
+}
+
/* Dump audio registers for Haswell and its successors (eg. Broadwell).
* Their register layout are same in the north display engine.
*/
@@ -2162,6 +2200,8 @@ static void dump_hsw_plus(void)
dump_aud_reg(AUD_TCA_EDID_DATA, "Audio EDID Data Block -
Transcoder A");
dump_aud_reg(AUD_TCB_EDID_DATA, "Audio EDID Data Block -
Transcoder B");
dump_aud_reg(AUD_TCC_EDID_DATA, "Audio EDID Data Block -
Transcoder C");
+ if (IS_SKYLAKE(devid))
+ dump_aud_reg(AUD_FREQ_CNTRL, "Audio BCLK Frequency Control");
dump_aud_reg(AUD_TCA_INFOFR, "Audio Widget Data Island Packet
- Transcoder A");
dump_aud_reg(AUD_TCB_INFOFR, "Audio Widget Data Island Packet
- Transcoder B");
dump_aud_reg(AUD_TCC_INFOFR, "Audio Widget Data Island Packet
- Transcoder C");
@@ -2192,6 +2232,22 @@ static void dump_hsw_plus(void)
dump_aud_reg(AUD_TCA_M_CTS, "Audio M CTS Read Back
Transcoder A");
dump_aud_reg(AUD_TCB_M_CTS, "Audio M CTS Read Back
Transcoder B");
dump_aud_reg(AUD_TCC_M_CTS, "Audio M CTS Read Back
Transcoder C");
+ if (IS_SKYLAKE(devid)) {
+ dump_aud_reg(AUD_HDA_DMA_REG, "Audio HD Audio DMA Control
Register");
+ dump_aud_reg(AUD_HDA_LPIB0_REG, "Audio HD Audio Stream0 Link
Position in Buffer");
+ dump_aud_reg(AUD_HDA_LPIB1_REG, "Audio HD Audio Stream1 Link
Position in Buffer");
+ dump_aud_reg(AUD_HDA_LPIB2_REG, "Audio HD Audio Stream2 Link
Position in Buffer");
+ dump_aud_reg(AUD_HDA_EXTRA_REG, "Audio HD Audio Extra
Register");
+ dump_aud_reg(AUD_FPGA_CRC_CTL_A, "Audio FPGA Pipe A CRC
Control");
+ dump_aud_reg(AUD_FPGA_CRC_CTL_B, "Audio FPGA Pipe B CRC
Control");
+ dump_aud_reg(AUD_FPGA_CRC_CTL_C, "Audio FPGA Pipe C CRC
Control");
+ dump_aud_reg(AUD_FPGA_CRC_RESULT_A, "Audio FPGA Pipe A CRC
Result");
+ dump_aud_reg(AUD_FPGA_CRC_RESULT_B, "Audio FPGA Pipe B CRC
Result");
+ dump_aud_reg(AUD_FPGA_CRC_RESULT_C, "Audio FPGA Pipe C CRC
Result");
+ dump_aud_reg(AUD_DFT_MVAL_REG, "Audio DFT M Value Register");
+ dump_aud_reg(AUD_DFT_NVAL_REG, "Audio DFT N Value Register");
+ dump_aud_reg(AUD_DFT_LOAD_REG, "Audio DFT LOAD Register");
+ }
printf("\nDetails:\n\n");
@@ -2272,6 +2328,11 @@ static void dump_hsw_plus(void)
if (BIT(dword, i))
printf("%s\n\t", audio_dp_dip_status[i]);
printf("\n");
+
+ dword = read_aud_reg(AUD_FREQ_CNTRL);
+ printf("AUD_FREQ_CNTRL Audio BCLK Frequency Control: %08x\n", dword);
+ if (IS_SKYLAKE(devid))
+ parse_skl_audio_freq_cntrl_reg(dword);
}
/* offset of hotplug enable */
@@ -2418,9 +2479,11 @@ int main(int argc, char **argv)
if (IS_VALLEYVIEW(devid)) {
printf("Valleyview audio registers:\n\n");
dump_ironlake();
- } else if (IS_BROADWELL(devid) || IS_HASWELL(devid)) {
+ } else if (IS_SKYLAKE(devid)
+ || IS_BROADWELL(devid) || IS_HASWELL(devid)) {
printf("%s audio registers:\n\n",
- IS_BROADWELL(devid) ? "Broadwell" : "Haswell");
+ IS_SKYLAKE(devid) ? "Skylake" :
+ (IS_BROADWELL(devid) ? "Broadwell" : "Haswell"));
dump_hsw_plus();
} else if (IS_GEN6(devid) || IS_GEN7(devid)
|| getenv("HAS_PCH_SPLIT")) {
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
