On 01/16/2015 05:57 PM, Jani Nikula wrote:
Use the drm core interfaces in preparation of removing our homebrew.
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
All looks well on code review and tested also and everything works. I
have ASUS T100 whose panel does not need actually the DCS write commands
during OTP or enabling, so this patch won't get exercised. With that said-
Reviewed-By: Shobhit Kumar <shobhit.ku...@intel.com>
---
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 52 +++++++++++++++++++-----------
1 file changed, 34 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index e363c26a2b05..0b09e66f7e29 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -113,14 +113,18 @@ static inline enum port intel_dsi_seq_port_to_port(u8
port)
static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
const u8 *data)
{
- u8 type, byte, mode, vc, seq_port;
+ struct mipi_dsi_device *dsi_device;
+ u8 type, flags, seq_port;
u16 len;
enum port port;
- byte = *data++;
- mode = (byte >> MIPI_TRANSFER_MODE_SHIFT) & 0x1;
- vc = (byte >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 0x3;
- seq_port = (byte >> MIPI_PORT_SHIFT) & 0x3;
+ flags = *data++;
+ type = *data++;
+
+ len = *((u16 *) data);
+ data += 2;
+
+ seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
/* For DSI single link on Port A & C, the seq_port value which is
* parsed from Sequence Block#53 of VBT has been set to 0
@@ -131,24 +135,29 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi
*intel_dsi,
port = PORT_C;
else
port = intel_dsi_seq_port_to_port(seq_port);
- /* LP or HS mode */
- intel_dsi->hs = mode;
- /* get packet type and increment the pointer */
- type = *data++;
+ dsi_device = intel_dsi->dsi_hosts[port]->device;
+ if (!dsi_device) {
+ DRM_DEBUG_KMS("no dsi device for port %c\n", port_name(port));
+ goto out;
+ }
- len = *((u16 *) data);
- data += 2;
+ if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
+ dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ else
+ dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
switch (type) {
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
- dsi_vc_generic_write_0(intel_dsi, vc, port);
+ mipi_dsi_generic_write(dsi_device, NULL, 0);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
- dsi_vc_generic_write_1(intel_dsi, vc, *data, port);
+ mipi_dsi_generic_write(dsi_device, data, 1);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
- dsi_vc_generic_write_2(intel_dsi, vc, *data, *(data + 1), port);
+ mipi_dsi_generic_write(dsi_device, data, 2);
break;
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
@@ -156,22 +165,23 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi
*intel_dsi,
DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
break;
case MIPI_DSI_GENERIC_LONG_WRITE:
- dsi_vc_generic_write(intel_dsi, vc, data, len, port);
+ mipi_dsi_generic_write(dsi_device, data, len);
break;
case MIPI_DSI_DCS_SHORT_WRITE:
- dsi_vc_dcs_write_0(intel_dsi, vc, *data, port);
+ mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
break;
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
- dsi_vc_dcs_write_1(intel_dsi, vc, *data, *(data + 1), port);
+ mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
break;
case MIPI_DSI_DCS_READ:
DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
break;
case MIPI_DSI_DCS_LONG_WRITE:
- dsi_vc_dcs_write(intel_dsi, vc, data, len, port);
+ mipi_dsi_dcs_write_buffer(dsi_device, data, len);
break;
}
+out:
data += len;
return data;
@@ -389,6 +399,7 @@ struct drm_panel *vbt_panel_init(struct intel_dsi
*intel_dsi, u16 panel_id)
u32 lp_to_hs_switch, hs_to_lp_switch;
u32 pclk, computed_ddr;
u16 burst_mode_ratio;
+ enum port port;
DRM_DEBUG_KMS("\n");
@@ -661,5 +672,10 @@ struct drm_panel *vbt_panel_init(struct intel_dsi
*intel_dsi, u16 panel_id)
vbt_panel->panel.funcs = &vbt_panel_funcs;
drm_panel_add(&vbt_panel->panel);
+ /* a regular driver would get the device in probe */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
+ }
+
return &vbt_panel->panel;
}
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
