This switch allows us to exercise the .atomic_set_property() that will
be used by atomic. The only real changes we need to make here are:
* extract the property validation from our old set_property handler and
stick it in intel_plane_atomic_check().
* make intel_check_*_plane() functions capable of handling a NULL crtc
(which will happen if userspace tries to set a property value on a
disabled plane).
Signed-off-by: Matt Roper <matthew.d.ro...@intel.com>
---
drivers/gpu/drm/i915/intel_atomic_plane.c | 24 +++++++++++++++++++-----
drivers/gpu/drm/i915/intel_display.c | 10 +++++++++-
drivers/gpu/drm/i915/intel_drv.h | 3 ---
drivers/gpu/drm/i915/intel_sprite.c | 31 ++++---------------------------
4 files changed, 32 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c
b/drivers/gpu/drm/i915/intel_atomic_plane.c
index 0b07b90..966c908 100644
--- a/drivers/gpu/drm/i915/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -104,13 +104,20 @@ static int intel_plane_atomic_check(struct drm_plane
*plane,
intel_state->dst.x2 = state->crtc_x + state->crtc_w;
intel_state->dst.y2 = state->crtc_y + state->crtc_h;
- /* Clip all planes to CRTC size, or 0x0 if CRTC is disabled */
+ /*
+ * Clip all planes to CRTC size, or 0x0 if CRTC unset or disabled.
+ * Note that CRTC may be unset if we're setting a property of a
+ * disabled plane.
+ */
intel_state->clip.x1 = 0;
intel_state->clip.y1 = 0;
- intel_state->clip.x2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_w : 0;
- intel_state->clip.y2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_h : 0;
+ if (crtc && intel_crtc->active) {
+ intel_state->clip.x2 = intel_crtc->config->pipe_src_w;
+ intel_state->clip.y2 = intel_crtc->config->pipe_src_h;
+ } else {
+ intel_state->clip.x2 = 0;
+ intel_state->clip.y2 = 0;
+ }
/*
* Disabling a plane is always okay; we just need to update
@@ -118,6 +125,9 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
* get called by the plane helpers.
*/
if (state->fb == NULL && plane->state->fb != NULL) {
+ if (WARN_ON(!crtc))
+ return -EINVAL;
+
/*
* 'prepare' is never called when plane is being disabled, so
* we need to handle frontbuffer tracking as a special case
@@ -126,6 +136,10 @@ static int intel_plane_atomic_check(struct drm_plane
*plane,
(1 << drm_plane_index(plane));
}
+ /* Rotation property should contain only a single rotation bit */
+ if (hweight32(intel_state->rotation & 0xf) != 1)
+ return -EINVAL;
+
return intel_plane->check_plane(plane, intel_state);
}
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 7db18d16..d34a8ca 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11774,6 +11774,10 @@ intel_check_primary_plane(struct drm_plane *plane,
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
+ /* CRTC may be unset if we're updating a property of a disabled plane */
+ if (!crtc)
+ return 0;
+
ret = drm_plane_helper_check_update(plane, crtc, fb,
src, dest, clip,
DRM_PLANE_HELPER_NO_SCALING,
@@ -11973,7 +11977,7 @@ const struct drm_plane_funcs intel_plane_funcs = {
.update_plane = drm_plane_helper_update,
.disable_plane = drm_plane_helper_disable,
.destroy = intel_plane_destroy,
- .set_property = intel_plane_set_property,
+ .set_property = drm_plane_helper_set_property,
.atomic_get_property = intel_plane_atomic_get_property,
.atomic_set_property = intel_plane_atomic_set_property,
.atomic_duplicate_state = intel_plane_duplicate_state,
@@ -12058,6 +12062,10 @@ intel_check_cursor_plane(struct drm_plane *plane,
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
+ /* CRTC may be unset if we're updating a property of a disabled plane */
+ if (!crtc)
+ return 0;
+
ret = drm_plane_helper_check_update(plane, crtc, fb,
src, dest, clip,
DRM_PLANE_HELPER_NO_SCALING,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 97c3ace..2d9e9a4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1246,9 +1246,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t
sdvo_reg, bool is_sdvob);
int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
enum plane plane);
-int intel_plane_set_property(struct drm_plane *plane,
- struct drm_property *prop,
- uint64_t val);
int intel_plane_restore(struct drm_plane *plane);
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index 8af4c69..c62f263 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1094,6 +1094,10 @@ intel_check_sprite_plane(struct drm_plane *plane,
intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
+ /* CRTC may be unset if we're updating a property of a disabled plane */
+ if (!intel_crtc)
+ return 0;
+
if (!fb) {
state->visible = false;
goto finish;
@@ -1367,33 +1371,6 @@ out_unlock:
return ret;
}
-int intel_plane_set_property(struct drm_plane *plane,
- struct drm_property *prop,
- uint64_t val)
-{
- struct drm_device *dev = plane->dev;
- struct intel_plane_state *state = to_intel_plane_state(plane->state);
- uint64_t old_val;
- int ret = -ENOENT;
-
- if (prop == dev->mode_config.rotation_property) {
- /* exactly one rotation angle please */
- if (hweight32(val & 0xf) != 1)
- return -EINVAL;
-
- if (state->rotation == val)
- return 0;
-
- old_val = state->rotation;
- state->rotation = val;
- ret = intel_plane_restore(plane);
- if (ret)
- state->rotation = old_val;
- }
-
- return ret;
-}
-
int intel_plane_restore(struct drm_plane *plane)
{
if (!plane->crtc || !plane->fb)
--
1.8.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
