On 12/01/15 03:35, Ben Widawsky wrote:
> WARNING: very minimally tested
>
> In general you should not need this tool. It's primary purpose is for
> benchmarking, and for debugging performance issues.
>
> For many kernel releases now sysfs has supported reading and writing the GPU
> frequency. Therefore, this tool provides no new functionality. What it does
> provide is an easy to package (for distros) tool that handles the most common
> scenarios.
>
> v2:
> Get rid of -f from the usage message (Jordan)
> Add space before [-s (Jordan)
> Add a -c/--custom example (Jordan)
> Add a setting for resetting to hardware default (Ken)
> Replicate examples in commit message in the source code. (me)
>
> Signed-off-by: Ben Widawsky <b...@bwidawsk.net>
> Reviewed-by: Jordan Justen <jordan.l.jus...@intel.com>
> Cc: Kenneth Graunke <kenn...@whitecape.org>
I think the syntax of some of these commands is rather strange; also, it
would be nicer to have consistent naming of inputs & outputs -
specifically, the input name "eff" is related to the output tag "RP1".
Please pick one of the other.
And are all the examples below actually correct?
> Here are some sample usages:
> $ sudo intel_frequency --get=cur,min,max,eff
> cur: 200 MHz
> min: 200 MHz
> RP1: 200 MHz
> max: 1200 MHz
>
> $ sudo intel_frequency -g
> cur: 200 MHz
> min: 200 MHz
> RP1: 200 MHz
> max: 1200 MHz
>
> $ sudo intel_frequency -geff
> RP1: 200 MHz
I wouldn't expect this syntax to work, because generally single-letter
options can be combined, so that "-geff" would be equivalent to "-g -e
-f -f". I'd expect to have to write "-g eff" or "-g=eff".
> $ sudo intel_frequency --set min=300
> $ sudo intel_frequency --get min
> cur: 300 MHz
> min: 300 MHz
> RP1: 200 MHz
> max: 1200 MHz
Surely if you specify "--get min" it should only print the "min" value,
not all the others; and the same with "--get max" below. (However, I
think you actually do need to show all values in these two examples to
clarify the effects of the parameter-setting commands, so I'd change
them to get rid of the parameter name).
Here, it isn't really clear what the difference between --custom and
--set is supposed to be. Partly this is just down to the numbers in
these specific examples, but also I think the examples don't agree with
the code below.
> $ sudo intel_frequency --custom max=900
> $ sudo intel_frequency --get max
> cur: 300 MHz
> min: 300 MHz
> RP1: 200 MHz
> max: 900 MHz
So from the code, I deduce that "--custom" lets you change either 'min'
or 'max', but doesn't /necessarily/ change the current frequency, only
if it becomes out-of-bounds.
OTOH "--set" is supposed to set both min *and* max, thus locking the
frequency to a specific value. But the --set example above doesn't show
that. Also, the "min=300" syntax would be illogical - you just need a
number, and doesn't appear to be what the code actually expects.
Finally, I think the choice of command names (especially --set vs
--custom) is confusing. I'd like to propose the following:
# Reading:
--get # get all
--get namelist # get specified
-g [namelist] # synonym for -g
# Set one parameter:
--set name=freq # set the specified parameter (min or max)
# may or may not affect 'cur'
-s name=freq # synonym
# Reset (all) parameters:
--defaults # Reset all r/w parameters to h/w defaults
-d # synonym
# Lock to specific frequency:
--max # Lock to (h/w defined) max
-m # synonym
--min # Lock to (h/w defined) min
-i # synonym
--eff # Lock to (h/w defined) RPe
-e # synonym
--lock freq # Lock to custom frequency
-l freq # synonym
[Aside]
If the locking commands are implemented by setting both 'min' and 'max'
to the same value, as appears to be the case in the code below, then
defining "--max" and "--min to mean "lock to current value of max/min
parameter (as I was originally going to) would result in the sequence of
commands:
$ sudo intel_frequency --lock 900
$ sudo intel_frequency --max
not having the expected effect - the second command would have no
effect, because max would have been changed to 900 by the first. So it's
better to for --min and --max to lock the frequency to the h/w default
values.
[/Aside]
Only one command may be given per invocation. (It could be meaningful to
combine some permutations, but it would be complicated and/or confusing
and involve extra (arbitrary) decisions, such as whether options are
processed in command-line order or in fixed order, and hence whether or
not "-d -g -m" is equivalent to "-m -g -d", etc. So KISS).
.Dave.
> $ sudo intel_frequency --max
> $ sudo intel_frequency -g
> cur: 1200 MHz
> min: 1200 MHz
> RP1: 200 MHz
> max: 1200 MHz
>
> $ sudo intel_frequency -e
> $ sudo intel_frequency -g
> cur: 200 MHz
> min: 200 MHz
> RP1: 200 MHz
> max: 200 MHz
>
> $ sudo intel_frequency --max
> $ sudo intel_frequency -g
> cur: 1200 MHz
> min: 1200 MHz
> RP1: 200 MHz
> max: 1200 MHz
>
> $ sudo intel_frequency --min
> $ sudo intel_frequency -g
> cur: 200 MHz
> min: 200 MHz
> RP1: 200 MHz
> max: 200 MHz
> ---
> tools/Makefile.sources | 1 +
> tools/intel_frequency.c | 363
> ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 364 insertions(+)
> create mode 100644 tools/intel_frequency.c
>
> diff --git a/tools/Makefile.sources b/tools/Makefile.sources
> index b85a6b8..2bea389 100644
> --- a/tools/Makefile.sources
> +++ b/tools/Makefile.sources
> @@ -14,6 +14,7 @@ bin_PROGRAMS = \
> intel_dump_decode \
> intel_error_decode \
> intel_forcewaked \
> + intel_frequency \
> intel_framebuffer_dump \
> intel_gpu_time \
> intel_gpu_top \
> diff --git a/tools/intel_frequency.c b/tools/intel_frequency.c
> new file mode 100644
> index 0000000..59f3814
> --- /dev/null
> +++ b/tools/intel_frequency.c
> @@ -0,0 +1,363 @@
> +/*
> + * Copyright © 2015 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + *
> + * Example:
> + * Get all frequencies:
> + * intel_frequency --get=cur,min,max,eff
> + *
> + * Same as above:
> + * intel_frequency -g
> + *
> + * Get the efficient frequency:
> + * intel_frequency -geff
> + *
> + * Lock the GPU frequency to 300MHz:
> + * intel_frequency --set min=300
> + *
> + * Set the maximum frequency to 900MHz:
> + * intel_frequency --custom max=900
> + *
> + * Lock the GPU frequency to its maximum frequency:
> + * intel_frequency --max
> + *
> + * Lock the GPU frequency to its most efficient frequency:
> + * intel_frequency -e
> + *
> + * Lock The GPU frequency to its minimum frequency:
> + * intel_frequency --min
> + *
> + * Reset the GPU to hardware defaults
> + * intel_frequency -d
> + */
> +
> +#define _GNU_SOURCE
> +#include <assert.h>
> +#include <getopt.h>
> +#include <stdio.h>
> +#include <time.h>
> +#include <unistd.h>
> +
> +#include "drmtest.h"
> +#include "intel_chipset.h"
> +
> +static int device, devid;
> +
> +enum {
> + CUR=0,
> + MIN,
> + EFF,
> + MAX,
> + RP0,
> + RPn
> +};
> +
> +struct freq_info {
> + const char *name;
> + const char *mode;
> + FILE *filp;
> + char *path;
> +};
> +
> +static struct freq_info info[] = {
> + { "cur", "r" },
> + { "min", "rb+" },
> + { "RP1", "r" },
> + { "max", "rb+" },
> + { "RP0", "r" },
> + { "RPn", "r" }
> +};
> +
> +static char *
> +get_sysfs_path(const char *which)
> +{
> + static const char fmt[] = "/sys/class/drm/card%1d/gt_%3s_freq_mhz";
> + char *path;
> + int ret;
> +
> +#define STATIC_STRLEN(string) (sizeof(string) / sizeof(string [0]))
> + ret = asprintf(&path, fmt, device, which);
> + assert(ret == (STATIC_STRLEN(fmt) - 3));
> +#undef STATIC_STRLEN
> +
> + return path;
> +}
> +
> +static void
> +initialize_freq_info(struct freq_info *freq_info)
> +{
> + if (freq_info->filp)
> + return;
> +
> + freq_info->path = get_sysfs_path(freq_info->name);
> + assert(freq_info->path);
> + freq_info->filp = fopen(freq_info->path, freq_info->mode);
> + assert(freq_info->filp);
> +}
> +
> +static void wait_freq_settle(void)
> +{
> + struct timespec ts;
> +
> + /* FIXME: Lazy sleep without check. */
> + ts.tv_sec = 0;
> + ts.tv_nsec = 20000;
> + clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL);
> +}
> +
> +static void set_frequency(struct freq_info *freq_info, int val)
> +{
> + initialize_freq_info(freq_info);
> + rewind(freq_info->filp);
> + assert(fprintf(freq_info->filp, "%d", val) > 0);
> +
> + wait_freq_settle();
> +}
> +
> +static int get_frequency(struct freq_info *freq_info)
> +{
> + int val;
> +
> + initialize_freq_info(freq_info);
> + rewind(freq_info->filp);
> + assert(fscanf(freq_info->filp, "%d", &val)==1);
> +
> + return val;
> +}
> +
> +static void
> +usage(const char *prog)
> +{
> + printf("Usage: %s [-e] [--min | --max] [-g (min|max|efficient)] [-s
> frequency_mhz]\n\n", prog);
> + printf("%s A program to manipulate Intel GPU frequencies.\n\n", prog);
> + printf("Options: \n");
> + printf(" -e Lock frequency to the most efficient
> frequency\n");
> + printf(" -g, --get= Get the frequency (optional arg:
> \"cur\"|\"min\"|\"max\"|\"eff\")\n");
> + printf(" -s, --set Lock frequency to an absolute value (MHz)\n");
> + printf(" -c, --custom Set a min, or max frequency \"min=X |
> max=Y\"\n");
> + printf(" -m --max Lock frequency to max frequency\n");
> + printf(" -i --min Lock frequency to min (never a good idea, DEBUG
> ONLY)\n");
> + printf(" -d --defaults Return the system to hardware defaults\n");
> + printf("Examples:\n");
> + printf("\tintel_frequency -gmin,cur Get the current and minimum
> frequency\n");
> + printf("\tintel_frequency -s 400 Lock frequency to 400Mhz\n");
> + printf("\tintel_frequency -c max=750 Set the max frequency to
> 750MHz\n");
> + exit(EXIT_FAILURE);
> +}
> +
> +/* Returns read or write operation */
> +static bool
> +parse(int argc, char *argv[], bool *act_upon, int *new_freq)
> +{
> + int c, tmp;
> + bool write = false;
> +
> + char *token[] = {
> + (char *)info[CUR].name,
> + (char *)info[MIN].name,
> + (char *)"eff",
> + (char *)info[MAX].name
> + };
> +
> + /* No args means -g" */
> + if (argc == 1) {
> + for (c = 0; c < ARRAY_SIZE(act_upon); c++)
> + act_upon[c] = true;
> + goto done;
> + }
> + while (1) {
> + int option_index = 0;
> + static struct option long_options[] = {
> + { "get", optional_argument, NULL, 'g' },
> + { "set", required_argument, NULL, 's' },
> + { "custom", required_argument, NULL, 'c'},
> + { "min", no_argument, NULL, 'i' },
> + { "max", no_argument, NULL, 'm' },
> + { "defaults", no_argument, NULL, 'd' },
> + { "help", no_argument, NULL, 'h' },
> + { NULL, 0, NULL, 0}
> + };
> +
> + c = getopt_long(argc, argv, "eg::s:c:midh", long_options,
> &option_index);
> + if (c == -1)
> + break;
> +
> + switch (c) {
> + case 'g':
> + if (write == true)
> + fprintf(stderr, "Read and write operations not
> support simultaneously.\n");
> +
> + if (optarg) {
> + char *value, *subopts = optarg;
> + int x;
> + while (*subopts != '\0') {
> + x = getsubopt(&subopts, token, &value);
> + if (x == -1) {
> + fprintf(stderr, "Unrecognized
> option (%s)\n", value);
> + break;
> + } else
> + act_upon[x] = true;
> + }
> + } else {
> + int i;
> + for (i = 0; i < ARRAY_SIZE(act_upon); i++)
> + act_upon[i] = true;
> + }
> + break;
> + case 's':
> + if (!optarg)
> + usage(argv[0]);
> +
> + if (write == true) {
> + fprintf(stderr, "Only one write may be
> specified at a time\n");
> + exit(EXIT_FAILURE);
> + }
> +
> + write = true;
> + act_upon[MIN] = true;
> + act_upon[MAX] = true;
> + sscanf(optarg, "%d", &new_freq[MAX]);
> + new_freq[MIN] = new_freq[MAX];
> + break;
> + case 'c':
> + if (!optarg)
> + usage(argv[0]);
> +
> + if (write == true) {
> + fprintf(stderr, "Only one write may be
> specified at a time\n");
> + exit(EXIT_FAILURE);
> + }
> +
> + write = true;
> +
> + if (!strncmp("min=", optarg, 4)) {
> + act_upon[MIN] = true;
> + sscanf(optarg+4, "%d", &new_freq[MIN]);
> + } else if (!strncmp("max=", optarg, 4)) {
> + act_upon[MAX] = true;
> + sscanf(optarg+4, "%d", &new_freq[MAX]);
> + } else {
> + fprintf(stderr, "Selected unmodifiable
> frequency\n");
> + exit(EXIT_FAILURE);
> + }
> + break;
> + case 'e': /* efficient */
> + if (IS_VALLEYVIEW(devid) || IS_CHERRYVIEW(devid)) {
> + /* the LP parts have special efficient
> frequencies */
> + fprintf(stderr,
> + "FIXME: Warning efficient frequency
> information is incorrect.\n");
> + exit(EXIT_FAILURE);
> + }
> + tmp = get_frequency(&info[EFF]);
> + new_freq[MIN] = tmp;
> + new_freq[MAX] = tmp;
> + act_upon[MIN] = true;
> + act_upon[MAX] = true;
> + write = true;
> + break;
> + case 'i': /* mIn */
> + tmp = get_frequency(&info[RPn]);
> + new_freq[MIN] = tmp;
> + new_freq[MAX] = tmp;
> + act_upon[MIN] = true;
> + act_upon[MAX] = true;
> + write = true;
> + break;
> + case 'm': /* max */
> + tmp = get_frequency(&info[RP0]);
> + new_freq[MIN] = tmp;
> + new_freq[MAX] = tmp;
> + act_upon[MIN] = true;
> + act_upon[MAX] = true;
> + write = true;
> + break;
> + case 'd': /* defaults */
> + new_freq[MIN] = get_frequency(&info[RPn]);
> + new_freq[MAX] = get_frequency(&info[RP0]);
> + act_upon[MIN] = true;
> + act_upon[MAX] = true;
> + write = true;
> + break;
> + case 'h':
> + default:
> + usage(argv[0]);
> + }
> + }
> +
> +done:
> + return write;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> +
> + bool write, fail, targets[MAX+1] = {false};
> + int i, try = 1, set_freq[MAX+1] = {0};
> +
> + devid = intel_get_drm_devid(drm_open_any());
> + device = drm_get_card();
> +
> + write = parse(argc, argv, targets, set_freq);
> + fail = write;
> +
> + /* If we've previously locked the frequency, we need to make sure to
> set things
> + * in the correct order, or else the operation will fail (ie. min = max
> = 200,
> + * and we set min to 300, we fail because it would try to set min >
> + * max). This can be accomplished be going either forward or reverse
> + * through the loop. MIN is always before MAX.
> + *
> + * XXX: Since only min and max are at play, the super lazy way is to do
> this
> + * 3 times and if we still fail after 3, it's for real.
> + */
> +again:
> + if (try > 2) {
> + fprintf(stderr, "Did not achieve desired freq.\n");
> + exit(EXIT_FAILURE);
> + }
> + for (i = 0; i < ARRAY_SIZE(targets); i++) {
> + if (targets[i] == false)
> + continue;
> +
> + if (write) {
> + set_frequency(&info[i], set_freq[i]);
> + if (get_frequency(&info[i]) != set_freq[i])
> + fail = true;
> + else
> + fail = false;
> + } else {
> + printf("%s: %d MHz\n", info[i].name,
> get_frequency(&info[i]));
> + }
> + }
> +
> + if (fail) {
> + try++;
> + goto again;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(targets); i++) {
> + if (info[i].filp) {
> + fclose(info[i].filp);
> + free(info[i].path);
> + }
> + }
> +
> + return EXIT_SUCCESS;
> +}
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
