For Dual link MIPI Panels, dsipll clock for both DSI0 and DSI1 needs to be
enabled.
v2: Address review comments by Jani
- Added wait time for PLL to be locked.
Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
---
drivers/gpu/drm/i915/intel_dsi_pll.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c
b/drivers/gpu/drm/i915/intel_dsi_pll.c
index fa7a6ca..93d8e9a 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -243,6 +243,9 @@ static void vlv_configure_dsi_pll(struct intel_encoder
*encoder)
dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL;
+ if (intel_dsi->dual_link)
+ dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL;
+
DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl);
@@ -269,12 +272,12 @@ void vlv_enable_dsi_pll(struct intel_encoder *encoder)
tmp |= DSI_PLL_VCO_EN;
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
- mutex_unlock(&dev_priv->dpio_lock);
-
- if (wait_for(I915_READ(PIPECONF(PIPE_A)) & PIPECONF_DSI_PLL_LOCKED,
20)) {
+ if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) &
+ DSI_PLL_LOCK, 20)) {
DRM_ERROR("DSI PLL lock failed\n");
return;
}
+ mutex_unlock(&dev_priv->dpio_lock);
DRM_DEBUG_KMS("DSI PLL locked\n");
}
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
