The audio programming sequence states that the ELD must be written and
enabled after the pipe is ready. Indeed, this should clarify the
situation with
commit c79057922ed6c2c6df1214e6ab4414fea1b23db2
Author: Daniel Vetter <daniel.vet...@ffwll.ch>
Date: Wed Apr 16 16:56:09 2014 +0200
drm/i915: Remove vblank wait from haswell_write_eld
and Ville's review of it [1].
Moreover, we should not touch the relevant registers before we get the
audio power domain.
[1] http://mid.gmane.org/20140416155309.gk18...@intel.com
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
drivers/gpu/drm/i915/intel_audio.c | 2 --
drivers/gpu/drm/i915/intel_ddi.c | 11 ++---------
2 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_audio.c
b/drivers/gpu/drm/i915/intel_audio.c
index 4d644efde608..b9d3a143dd8c 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -160,8 +160,6 @@ static void haswell_write_eld(struct drm_connector
*connector,
I915_WRITE(aud_cntrl_st2, tmp);
POSTING_READ(aud_cntrl_st2);
- assert_pipe_disabled(dev_priv, pipe);
-
/* Set ELD valid state */
tmp = I915_READ(aud_cntrl_st2);
DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 2688bc940879..56e7cb1ddc75 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1120,15 +1120,6 @@ static void intel_ddi_pre_enable(struct intel_encoder
*intel_encoder)
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
- if (crtc->config.has_audio) {
- DRM_DEBUG_DRIVER("Audio on pipe %c on DDI\n",
- pipe_name(crtc->pipe));
-
- /* write eld */
- DRM_DEBUG_DRIVER("DDI audio: write eld information\n");
- intel_write_eld(intel_encoder);
- }
-
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
intel_edp_panel_on(intel_dp);
@@ -1225,6 +1216,8 @@ static void intel_enable_ddi(struct intel_encoder
*intel_encoder)
if (intel_crtc->config.has_audio) {
intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
+ intel_write_eld(intel_encoder);
+
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe *
4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
--
2.1.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
