On Fri, Oct 17, 2014 at 08:05:08AM -0700, Rodrigo Vivi wrote:
> Current chv spec teels we can only use either 16 or 32 bits as precision.
>
> Although in the past VLV went from 16/32 to 32/64 and spec might not be
> updated,
> these precision values brings stability and fixes some issues Wayne was
> facing.
Lies, damned lies, specs!
Well in this case I guess the spec might be correct since it helps
Wayne.
>
> Cc: Wayne Boyer <wayne.bo...@intel.com>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.v...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 13 +++++++------
> drivers/gpu/drm/i915/intel_pm.c | 40 +++++++++++++++++++++++++---------------
> 2 files changed, 32 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6db369a..dcd5650 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4054,17 +4054,18 @@ enum punit_power_well {
> #define DSPFW_PLANEA_WM1_HI_MASK (1<<0)
>
> /* drain latency register values*/
> +#define DRAIN_LATENCY_PRECISION_16 16
> #define DRAIN_LATENCY_PRECISION_32 32
> #define DRAIN_LATENCY_PRECISION_64 64
While you're poking at this stuff, could I trouble you to remove these
defines and just use the values directly? Could be a separate patch if
you prefer.
> #define VLV_DDL(pipe) (VLV_DISPLAY_BASE + 0x70050 + 4
> * (pipe))
> -#define DDL_CURSOR_PRECISION_64 (1<<31)
> -#define DDL_CURSOR_PRECISION_32 (0<<31)
> +#define DDL_CURSOR_PRECISION_HIGH (1<<31)
> +#define DDL_CURSOR_PRECISION_LOW (0<<31)
> #define DDL_CURSOR_SHIFT 24
> -#define DDL_SPRITE_PRECISION_64(sprite) (1<<(15+8*(sprite)))
> -#define DDL_SPRITE_PRECISION_32(sprite) (0<<(15+8*(sprite)))
> +#define DDL_SPRITE_PRECISION_HIGH(sprite) (1<<(15+8*(sprite)))
> +#define DDL_SPRITE_PRECISION_LOW(sprite) (0<<(15+8*(sprite)))
> #define DDL_SPRITE_SHIFT(sprite) (8+8*(sprite))
> -#define DDL_PLANE_PRECISION_64 (1<<7)
> -#define DDL_PLANE_PRECISION_32 (0<<7)
> +#define DDL_PLANE_PRECISION_HIGH (1<<7)
> +#define DDL_PLANE_PRECISION_LOW (0<<7)
> #define DDL_PLANE_SHIFT 0
> #define DRAIN_LATENCY_MASK 0x7f
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index daa99e7..50c3512 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -1345,6 +1345,7 @@ static bool vlv_compute_drain_latency(struct drm_crtc
> *crtc,
> int *prec_mult,
> int *drain_latency)
> {
> + struct drm_device *dev = crtc->dev;
> int entries;
> int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
>
> @@ -1355,8 +1356,12 @@ static bool vlv_compute_drain_latency(struct drm_crtc
> *crtc,
> return false;
>
> entries = DIV_ROUND_UP(clock, 1000) * pixel_size;
> - *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_64 :
> - DRAIN_LATENCY_PRECISION_32;
> + if (IS_CHERRYVIEW(dev))
> + *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_32 :
> + DRAIN_LATENCY_PRECISION_16;
> + else
> + *prec_mult = (entries > 128) ? DRAIN_LATENCY_PRECISION_64 :
> + DRAIN_LATENCY_PRECISION_32;
> *drain_latency = (64 * (*prec_mult) * 4) / entries;
>
> if (*drain_latency > DRAIN_LATENCY_MASK)
> @@ -1375,15 +1380,18 @@ static bool vlv_compute_drain_latency(struct drm_crtc
> *crtc,
>
> static void vlv_update_drain_latency(struct drm_crtc *crtc)
> {
> - struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> int pixel_size;
> int drain_latency;
> enum pipe pipe = intel_crtc->pipe;
> int plane_prec, prec_mult, plane_dl;
> + int high_precision = IS_CHERRYVIEW(dev) ? DRAIN_LATENCY_PRECISION_32 :
> + DRAIN_LATENCY_PRECISION_64;
Maybe const just help the reader remember that it's a constant.
>
> - plane_dl = I915_READ(VLV_DDL(pipe)) & ~(DDL_PLANE_PRECISION_64 |
> - DRAIN_LATENCY_MASK | DDL_CURSOR_PRECISION_64 |
> + plane_dl = I915_READ(VLV_DDL(pipe)) & ~(DDL_PLANE_PRECISION_HIGH |
> + DRAIN_LATENCY_MASK | DDL_CURSOR_PRECISION_HIGH |
> (DRAIN_LATENCY_MASK << DDL_CURSOR_SHIFT));
>
> if (!intel_crtc_active(crtc)) {
> @@ -1394,9 +1402,9 @@ static void vlv_update_drain_latency(struct drm_crtc
> *crtc)
> /* Primary plane Drain Latency */
> pixel_size = crtc->primary->fb->bits_per_pixel / 8; /* BPP */
> if (vlv_compute_drain_latency(crtc, pixel_size, &prec_mult,
> &drain_latency)) {
> - plane_prec = (prec_mult == DRAIN_LATENCY_PRECISION_64) ?
> - DDL_PLANE_PRECISION_64 :
> - DDL_PLANE_PRECISION_32;
> + plane_prec = (prec_mult == high_precision) ?
> + DDL_PLANE_PRECISION_HIGH :
> + DDL_PLANE_PRECISION_LOW;
> plane_dl |= plane_prec | drain_latency;
> }
>
> @@ -1408,9 +1416,9 @@ static void vlv_update_drain_latency(struct drm_crtc
> *crtc)
> /* Program cursor DL only if it is enabled */
> if (intel_crtc->cursor_base &&
> vlv_compute_drain_latency(crtc, pixel_size, &prec_mult,
> &drain_latency)) {
> - plane_prec = (prec_mult == DRAIN_LATENCY_PRECISION_64) ?
> - DDL_CURSOR_PRECISION_64 :
> - DDL_CURSOR_PRECISION_32;
> + plane_prec = (prec_mult == high_precision) ?
> + DDL_CURSOR_PRECISION_HIGH :
> + DDL_CURSOR_PRECISION_LOW;
> plane_dl |= plane_prec | (drain_latency << DDL_CURSOR_SHIFT);
> }
>
> @@ -1578,15 +1586,17 @@ static void valleyview_update_sprite_wm(struct
> drm_plane *plane,
> int plane_prec;
> int sprite_dl;
> int prec_mult;
> + int high_precision = IS_CHERRYVIEW(dev) ? DRAIN_LATENCY_PRECISION_32 :
> + DRAIN_LATENCY_PRECISION_64;
Could also be const.
Otherwise looks good, so:
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> - sprite_dl = I915_READ(VLV_DDL(pipe)) &
> ~(DDL_SPRITE_PRECISION_64(sprite) |
> + sprite_dl = I915_READ(VLV_DDL(pipe)) &
> ~(DDL_SPRITE_PRECISION_HIGH(sprite) |
> (DRAIN_LATENCY_MASK << DDL_SPRITE_SHIFT(sprite)));
>
> if (enabled && vlv_compute_drain_latency(crtc, pixel_size, &prec_mult,
> &drain_latency)) {
> - plane_prec = (prec_mult == DRAIN_LATENCY_PRECISION_64) ?
> - DDL_SPRITE_PRECISION_64(sprite) :
> - DDL_SPRITE_PRECISION_32(sprite);
> + plane_prec = (prec_mult == high_precision) ?
> + DDL_SPRITE_PRECISION_HIGH(sprite) :
> + DDL_SPRITE_PRECISION_LOW(sprite);
> sprite_dl |= plane_prec |
> (drain_latency << DDL_SPRITE_SHIFT(sprite));
> }
> --
> 1.9.3
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
