On Wed, Oct 08, 2014 at 07:32:12AM -0700, Jesse Barnes wrote:
> On Wed, 8 Oct 2014 07:43:34 +0100
> Chris Wilson <ch...@chris-wilson.co.uk> wrote:
>
> > On Tue, Oct 07, 2014 at 01:25:23PM -0700, Jesse Barnes wrote:
> > > Gets the detect code (which may take awhile) out of the resume path,
> > > speeding things up a bit.
> > >
> > > v2: use a delayed work queue instead (Daniel)
> > >
> > > Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org>
> > > ---
> > > drivers/gpu/drm/i915/i915_dma.c | 10 ++++++++++
> > > drivers/gpu/drm/i915/i915_drv.c | 8 ++++++--
> > > drivers/gpu/drm/i915/i915_drv.h | 1 +
> > > 3 files changed, 17 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_dma.c
> > > b/drivers/gpu/drm/i915/i915_dma.c
> > > index 85d14e1..633095d 100644
> > > --- a/drivers/gpu/drm/i915/i915_dma.c
> > > +++ b/drivers/gpu/drm/i915/i915_dma.c
> > > @@ -1303,6 +1303,15 @@ static const struct vga_switcheroo_client_ops
> > > i915_switcheroo_ops = {
> > > .can_switch = i915_switcheroo_can_switch,
> > > };
> > >
> > > +static void intel_resume_hotplug(struct work_struct *work)
> > > +{
> > > + struct drm_i915_private *dev_priv =
> > > + container_of(work, struct drm_i915_private,
> > > + hotplug_resume_work.work);
> > > +
> > > + drm_helper_hpd_irq_event(dev_priv->dev);
> > > +}
> > > +
> > > static int i915_load_modeset_init(struct drm_device *dev)
> > > {
> > > struct drm_i915_private *dev_priv = dev->dev_private;
> > > @@ -1364,6 +1373,7 @@ static int i915_load_modeset_init(struct drm_device
> > > *dev)
> > >
> > > /* Only enable hotplug handling once the fbdev is fully set up. */
> > > intel_hpd_init(dev_priv);
> > > + INIT_DELAYED_WORK(&dev_priv->hotplug_resume_work, intel_resume_hotplug);
> > >
> > > /*
> > > * Some ports require correctly set-up hpd registers for detection to
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.c
> > > b/drivers/gpu/drm/i915/i915_drv.c
> > > index a05a1d0..83075f9 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.c
> > > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > > @@ -726,8 +726,12 @@ static int __i915_drm_thaw(struct drm_device *dev,
> > > bool restore_gtt_mappings)
> > > * notifications.
> > > * */
> > > intel_hpd_init(dev_priv);
> > > - /* Config may have changed between suspend and resume */
> > > - drm_helper_hpd_irq_event(dev);
> > > + /* Config may have changed between suspend and resume. Just
> > > + * try to make sure the rest of driver resume is finished
> > > + * before we start probing for config changes.
/* Config may have changed between suspend and resume, queue a hotplug
* notification for userspace to check when it wakes up. Delay the work
* slightly so that the resume has time to finish, before userspace
* starts pounding at the gates checking for changes. This speeds up the
* resume process by reducing contention for resources.
*/
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
