On Wed, Sep 10, 2014 at 04:45:09PM +0300, Jani Nikula wrote:
> On Wed, 10 Sep 2014, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > Use pack_aux() to construct the PSR exit DPMS D0 AUX message,
> > and use the defines from dp_dp_helper.h to populate the message
> > contents.
> >
> > Cc: Rodrigo Vivi <rodrigo.v...@gmail.com>
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 2 --
> > drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++-----
> > 2 files changed, 11 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index e4d7607..fb60493 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2453,9 +2453,7 @@ enum punit_power_well {
> >
> > #define EDP_PSR_AUX_CTL(dev) (EDP_PSR_BASE(dev) +
> > 0x10)
> > #define EDP_PSR_AUX_DATA1(dev) (EDP_PSR_BASE(dev) +
> > 0x14)
> > -#define EDP_PSR_DPCD_COMMAND 0x80060000
> > #define EDP_PSR_AUX_DATA2(dev) (EDP_PSR_BASE(dev) +
> > 0x18)
> > -#define EDP_PSR_DPCD_NORMAL_OPERATION (1<<24)
> > #define EDP_PSR_AUX_DATA3(dev) (EDP_PSR_BASE(dev) +
> > 0x1c)
> > #define EDP_PSR_AUX_DATA4(dev) (EDP_PSR_BASE(dev) +
> > 0x20)
> > #define EDP_PSR_AUX_DATA5(dev) (EDP_PSR_BASE(dev) +
> > 0x24)
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index 81d7681..05bab25 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -225,7 +225,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > }
> >
> > static uint32_t
> > -pack_aux(uint8_t *src, int src_bytes)
> > +pack_aux(const uint8_t *src, int src_bytes)
> > {
> > int i;
> > uint32_t v = 0;
> > @@ -1741,8 +1741,14 @@ static void intel_edp_psr_enable_sink(struct
> > intel_dp *intel_dp)
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > uint32_t aux_clock_divider;
> > int precharge = 0x3;
> > - int msg_size = 5; /* Header(4) + Message(1) */
> > bool only_standby = false;
> > + static const uint8_t aux_msg[] = {
> > + [0] = DP_AUX_NATIVE_WRITE << 4,
> > + [1] = DP_SET_POWER >> 8,
> > + [2] = DP_SET_POWER & 0xff,
> > + [3] = 1 - 1,
> > + [4] = DP_SET_POWER_D0,
> > + };
> >
> > aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
> >
> > @@ -1758,11 +1764,11 @@ static void intel_edp_psr_enable_sink(struct
> > intel_dp *intel_dp)
> > DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
> >
> > /* Setup AUX registers */
> > - I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND);
> > - I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION);
> > + I915_WRITE(EDP_PSR_AUX_DATA1(dev), pack_aux(&aux_msg[0], 4));
> > + I915_WRITE(EDP_PSR_AUX_DATA2(dev), pack_aux(&aux_msg[4], 1));
> > I915_WRITE(EDP_PSR_AUX_CTL(dev),
> > DP_AUX_CH_CTL_TIME_OUT_400us |
> > - (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
> > + (5 << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
>
> s/5/ARRAY_SIZE(aux_msg)/ ?
Or just sizeof(). Either is fine by me.
>
> > (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
> > (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
> > }
> > --
> > 1.8.5.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
