On 15.08.2014 00:22, ville.syrj...@linux.intel.com wrote:
From: Ville Syrjälä <ville.syrj...@linux.intel.com>
The spec says:
"For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata,
GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31
(DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in
both the DPLL A Control Register (06014h-06017h) and DPLL B Control
Register (06018h-0601Bh)."
The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we
just need a bit of special care to handle DPLL_DVO_2X_MODE.
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Tested-by: Thomas Richter <rich...@rus.uni-stuttgart.de>
---
drivers/gpu/drm/i915/i915_drv.h | 3 +++
drivers/gpu/drm/i915/intel_display.c | 47 +++++++++++++++++++++++++++++++++---
2 files changed, 46 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 541fb6f..54895a6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1561,6 +1561,9 @@ struct drm_i915_private {
u16 orig_clock;
+ /* used to control DVO 2x clock enable on 830M */
+ uint8_t dvo_pipes;
+
bool mchbar_need_disable;
struct intel_l3_parity l3_parity;
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 3eeb5ce..6462bcf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1548,6 +1548,7 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = crtc->pipe;
int reg = DPLL(crtc->pipe);
u32 dpll = crtc->config.dpll_hw_state.dpll;
@@ -1560,7 +1561,16 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
if (IS_MOBILE(dev) && !IS_I830(dev))
assert_panel_unlocked(dev_priv, crtc->pipe);
- I915_WRITE(reg, dpll);
+ /* enable DVO 2x clock on both PLLs if necessary */
+ if (IS_I830(dev)) {
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ dev_priv->dvo_pipes |= 1 << pipe;
+
+ if (dev_priv->dvo_pipes) {
+ dpll |= DPLL_DVO_2X_MODE;
+ I915_WRITE(DPLL(!pipe), I915_READ(DPLL(!pipe)) |
DPLL_DVO_2X_MODE);
+ }
+ }
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
@@ -1599,8 +1609,23 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
*
* Note! This is for pre-ILK only.
*/
-static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+static void i9xx_disable_pll(struct intel_crtc *crtc)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = crtc->pipe;
+
+ /* disable DVO 2x clock on both PLLs if necessary */
+ if (IS_I830(dev)) {
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ dev_priv->dvo_pipes &= ~(1 << pipe);
+
+ if (!dev_priv->dvo_pipes) {
+ I915_WRITE(DPLL(pipe), I915_READ(DPLL(pipe)) &
~DPLL_DVO_2X_MODE);
+ I915_WRITE(DPLL(!pipe), I915_READ(DPLL(!pipe)) &
~DPLL_DVO_2X_MODE);
+ }
+ }
+
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
return;
@@ -4788,7 +4813,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
else if (IS_VALLEYVIEW(dev))
vlv_disable_pll(dev_priv, pipe);
else
- i9xx_disable_pll(dev_priv, pipe);
+ i9xx_disable_pll(intel_crtc);
}
if (!IS_GEN2(dev))
@@ -5792,7 +5817,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
@@ -6298,6 +6323,9 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
}
pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
if (!IS_VALLEYVIEW(dev)) {
+ if (IS_I830(dev))
+ pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
+
pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
} else {
@@ -13021,6 +13049,17 @@ void intel_modeset_setup_hw_state(struct drm_device
*dev,
}
}
+ /* update dvo_pipes */
+ if (IS_I830(dev)) {
+ dev_priv->dvo_pipes = 0;
+
+ for_each_intel_crtc(dev, crtc) {
+ if (crtc->active &&
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ dev_priv->dvo_pipes |= 1 << crtc->pipe;
+ }
+ }
+
/* HW state is read out, now we need to sanitize this mess. */
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
