On Tue, Jul 29, 2014 at 02:38:36PM +0300, Imre Deak wrote:
> On Sat, 2014-07-12 at 17:17 +0530, Shobhit Kumar wrote:
> > Call to vlv_crtc_clock_get is not needed for DSI and was causing dpio
> > read WARN dumps as well. Absence of ->get_config was casuing othet WARN
> > dumps as well. With this the last of the known WARN dumps for DSI should
> > be fixed.
> >
> > Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 7 +++---
> > drivers/gpu/drm/i915/intel_dsi.c | 45
> > ++++++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/i915/intel_dsi.h | 3 +++
> > drivers/gpu/drm/i915/intel_dsi_pll.c | 4 +++-
> > 4 files changed, 55 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index fe6f1db..3d0ea7c 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -6309,9 +6309,10 @@ static bool i9xx_get_pipe_config(struct intel_crtc
> > *crtc,
> >
> > if (IS_CHERRYVIEW(dev))
> > chv_crtc_clock_get(crtc, pipe_config);
> > - else if (IS_VALLEYVIEW(dev))
> > - vlv_crtc_clock_get(crtc, pipe_config);
> > - else
> > + else if (IS_VALLEYVIEW(dev)) {
> > + if (!intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DSI))
> > + vlv_crtc_clock_get(crtc, pipe_config);
> > + } else
> > i9xx_crtc_clock_get(crtc, pipe_config);
> >
> > return true;
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index bfcefbf..61da0e5 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -351,9 +351,54 @@ static bool intel_dsi_get_hw_state(struct
> > intel_encoder *encoder,
> > static void intel_dsi_get_config(struct intel_encoder *encoder,
> > struct intel_crtc_config *pipe_config)
> > {
> > + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > + u32 dsi_clock, pclk;
> > + u32 pll_ctl, pll_div;
> > + u32 m = 0, p = 0;
> > + int refclk = 25000;
> > + int i;
> > +
> > DRM_DEBUG_KMS("\n");
> >
> > /* XXX: read flags, set to adjusted_mode */
>
> This comment can be removed.
There's a v2 with a lot of this addressed already.
-Daniel
>
> > + pipe_config->quirks = 1;
>
> The proper macro should be used.
>
> > +
> > + memset(&pipe_config->dpll_hw_state, 0,
> > + sizeof(pipe_config->dpll_hw_state));
> > +
> > + mutex_lock(&dev_priv->dpio_lock);
> > + pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
> > + pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER);
> > + mutex_unlock(&dev_priv->dpio_lock);
> > +
> > + pll_ctl &= ~(DSI_PLL_CLK_GATE_DSI0_DSIPLL | DSI_PLL_VCO_EN);
> > + pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2);
>
> I'd prefer a proper masking of the P1 field instead of depending on
> other register fields being 0. The same goes for pll_div[M1].
>
> > +
> > + while (pll_ctl) {
> > + pll_ctl = pll_ctl >> 1;
> > + p++;
> > + }
> > + p--;
> > +
> > + for (i = 0; i < num_lfsr_converts; i++) {
> > + if (lfsr_converts[i] == pll_div)
> > + break;
> > + }
> > +
> > + if (i == num_lfsr_converts) {
> > + DRM_ERROR("wrong m_seed programmed\n");
> > + return;
> > + }
> > +
> > + m = i + 62;
> > +
> > + dsi_clock = (m * refclk) / p;
>
> Should guard against div-by-zero.
>
> > + pclk = DIV_ROUND_CLOSEST(dsi_clock * intel_dsi->lane_count,
> > + pipe_config->pipe_bpp);
>
> dsi_clk_from_pclk() uses dsi->pixel_format in place of pipe_bpp, so an
> assert here that the two values agree would be nice.
>
> > +
> > + pipe_config->adjusted_mode.crtc_clock = pclk;
> > + pipe_config->port_clock = pclk;
> > }
> >
> > static enum drm_mode_status
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.h
> > b/drivers/gpu/drm/i915/intel_dsi.h
> > index 31db33d..e0c16b0 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.h
> > +++ b/drivers/gpu/drm/i915/intel_dsi.h
> > @@ -130,6 +130,9 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct
> > drm_encoder *encoder)
> > return container_of(encoder, struct intel_dsi, base.base);
> > }
> >
> > +extern const u32 lfsr_converts[];
> > +extern const int num_lfsr_converts;
> > +
> > extern void vlv_enable_dsi_pll(struct intel_encoder *encoder);
> > extern void vlv_disable_dsi_pll(struct intel_encoder *encoder);
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c
> > b/drivers/gpu/drm/i915/intel_dsi_pll.c
> > index ba79ec1..78449ea 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi_pll.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
> > @@ -43,13 +43,15 @@ struct dsi_mnp {
> > u32 dsi_pll_div;
> > };
> >
> > -static const u32 lfsr_converts[] = {
> > +const u32 lfsr_converts[] = {
> > 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 62 - 70 */
> > 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
> > 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
> > 71, 35 /* 91 - 92 */
> > };
> >
> > +const int num_lfsr_converts = sizeof(lfsr_converts) /
> > sizeof(lfsr_converts[0]);
>
> You can use ARRAY_SIZE here.
>
> > +
> > #ifdef DSI_CLK_FROM_RR
> >
> > static u32 dsi_rr_formula(const struct drm_display_mode *mode,
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
