On 6/24/2014 3:59 PM, Damien Lespiau wrote:
On Mon, Jun 23, 2014 at 11:06:00AM +0530, sonika.jin...@intel.com wrote:
From: Sonika Jindal <sonika.jin...@intel.com>

Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.

v4: Updated rotation checks for pending flips, fbc disable. Creating
rotation property only for Gen4 onwards. Property resetting as part
of lastclose.

v5: Resetting property in i915_driver_lastclose properly for planes
and crtcs. Fixed linear offset calculation that was off by 1 w.r.t
width in i9xx_update_plane and ironlake_update_plane. Removed tab
based indentation and unnecessary braces in intel_crtc_set_property
and intel_update_fbc. FBC and flip related checks should be done only
for valid crtcs.

v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property
and positioning the disable code in intel_update_fbc.

v7: In case rotation property on inactive crtc is updated, we return
successfully printing debug log as crtc is inactive and only property change
is preserved.

v8: update_plane is changed to update_primary_plane, crtc->fb is changed to
crtc->primary->fb  and return value of update_primary_plane is ignored.

v9: added rotation property to primary plane instead of crtc. Removing reset
of rotation property from lastclose. rotation_property is moved to drm_plane,so
drm layer will take care of resetting.

Testcase: igt/kms_rotation_crc

Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
Cc: Jani Nikula <jani.nik...@linux.intel.com>
Cc: dri-de...@lists.freedesktop.org
Cc: vijay.a.purushotha...@intel.com
Signed-off-by: Uma Shankar <uma.shan...@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kam...@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
  drivers/gpu/drm/i915/i915_dma.c      |    5 --
  drivers/gpu/drm/i915/i915_reg.h      |    1 +
  drivers/gpu/drm/i915/intel_display.c |   94 ++++++++++++++++++++++++++++++++--
  drivers/gpu/drm/i915/intel_pm.c      |    8 +++
  4 files changed, 98 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5e583a1..4b6b911 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1938,14 +1938,9 @@ int i915_driver_open(struct drm_device *dev, struct 
drm_file *file)
   */
  void i915_driver_lastclose(struct drm_device *dev)
  {
-       struct drm_i915_private *dev_priv = dev->dev_private;
-
        /* On gen6+ we refuse to init without kms enabled, but then the drm core
         * goes right around and calls lastclose. Check for this and don't clean
         * up anything. */
-       if (!dev_priv)
-               return;
-
        if (drm_core_check_feature(dev, DRIVER_MODESET)) {
                intel_fbdev_restore_mode(dev);
                vga_switcheroo_process_delayed_switch();
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c70c804..c600d3b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4087,6 +4087,7 @@ enum punit_power_well {
  #define   DISPPLANE_NO_LINE_DOUBLE            0
  #define   DISPPLANE_STEREO_POLARITY_FIRST     0
  #define   DISPPLANE_STEREO_POLARITY_SECOND    (1<<18)
+#define   DISPPLANE_ROTATE_180         (1<<15)
  #define   DISPPLANE_TRICKLE_FEED_DISABLE      (1<<14) /* Ironlake */
  #define   DISPPLANE_TILED                     (1<<10)
  #define _DSPAADDR                             0x70184
diff --git a/drivers/gpu/drm/i915/intel_display.c 
b/drivers/gpu/drm/i915/intel_display.c
index 5e8e711..85bd3b8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2414,7 +2414,9 @@ static void i9xx_update_primary_plane(struct drm_crtc 
*crtc,
        unsigned long linear_offset;
        u32 dspcntr;
        u32 reg;
+       int pixel_size;

+       pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
        intel_fb = to_intel_framebuffer(fb);
        obj = intel_fb->obj;

@@ -2422,6 +2424,8 @@ static void i9xx_update_primary_plane(struct drm_crtc 
*crtc,
        dspcntr = I915_READ(reg);
        /* Mask out pixel format bits in case we change it */
        dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+       dspcntr &= ~DISPPLANE_ROTATE_180;
+
        switch (fb->pixel_format) {
        case DRM_FORMAT_C8:
                dspcntr |= DISPPLANE_8BPP;
@@ -2463,8 +2467,6 @@ static void i9xx_update_primary_plane(struct drm_crtc 
*crtc,
        if (IS_G4X(dev))
                dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

-       I915_WRITE(reg, dspcntr);
-
        linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);

        if (INTEL_INFO(dev)->gen >= 4) {
@@ -2477,6 +2479,17 @@ static void i9xx_update_primary_plane(struct drm_crtc 
*crtc,
                intel_crtc->dspaddr_offset = linear_offset;
        }

+       if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+               dspcntr |= DISPPLANE_ROTATE_180;
+
+               x += (intel_crtc->config.pipe_src_w - 1);
+               y += (intel_crtc->config.pipe_src_h - 1);
+               linear_offset += (intel_crtc->config.pipe_src_h - 1) * 
fb->pitches[0] +
+                               (intel_crtc->config.pipe_src_w - 1) * 
pixel_size;
+       }
+
+       I915_WRITE(reg, dspcntr);
+
        DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
                      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
                      fb->pitches[0]);
@@ -2487,7 +2500,8 @@ static void i9xx_update_primary_plane(struct drm_crtc 
*crtc,
                I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
                I915_WRITE(DSPLINOFF(plane), linear_offset);
        } else
-               I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + 
linear_offset);
+               I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) +
+                               linear_offset);
        POSTING_READ(reg);
  }

@@ -2504,7 +2518,9 @@ static void ironlake_update_primary_plane(struct drm_crtc 
*crtc,
        unsigned long linear_offset;
        u32 dspcntr;
        u32 reg;
+       int pixel_size;

+       pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
        intel_fb = to_intel_framebuffer(fb);
        obj = intel_fb->obj;

@@ -2512,6 +2528,8 @@ static void ironlake_update_primary_plane(struct drm_crtc 
*crtc,
        dspcntr = I915_READ(reg);
        /* Mask out pixel format bits in case we change it */
        dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+       dspcntr &= ~DISPPLANE_ROTATE_180;
+
        switch (fb->pixel_format) {
        case DRM_FORMAT_C8:
                dspcntr |= DISPPLANE_8BPP;
@@ -2549,8 +2567,6 @@ static void ironlake_update_primary_plane(struct drm_crtc 
*crtc,
        else
                dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

-       I915_WRITE(reg, dspcntr);
-
        linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
        intel_crtc->dspaddr_offset =
                intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
@@ -2558,6 +2574,20 @@ static void ironlake_update_primary_plane(struct 
drm_crtc *crtc,
                                               fb->pitches[0]);
        linear_offset -= intel_crtc->dspaddr_offset;

+       if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+               dspcntr |= DISPPLANE_ROTATE_180;
+
+               if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+                       x += (intel_crtc->config.pipe_src_w - 1);
+                       y += (intel_crtc->config.pipe_src_h - 1);
+                       linear_offset += (intel_crtc->config.pipe_src_h - 1) *
+                               fb->pitches[0] + (intel_crtc->config.pipe_src_w 
- 1) *
+                               pixel_size;
+               }
+       }
+
+       I915_WRITE(reg, dspcntr);
+
        DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
                      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
                      fb->pitches[0]);
@@ -11324,10 +11354,50 @@ static void intel_plane_destroy(struct drm_plane 
*plane)
        kfree(intel_plane);
  }

+static int intel_primary_plane_set_property(struct drm_plane *plane,
+                                   struct drm_property *prop,
+                                   uint64_t val)
+{
+       struct drm_device *dev = plane->dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_plane *intel_plane = to_intel_plane(plane);
+       struct intel_crtc *intel_crtc = to_intel_crtc(plane->crtc);
+       struct drm_crtc *crtc = &intel_crtc->base;
+       uint64_t old_val;
+
+       if (prop == plane->rotation_property) {
+               /* exactly one rotation angle please */
+               if (hweight32(val & 0xf) != 1)
+                       return -EINVAL;
+
+               old_val = intel_plane->rotation;
+               intel_plane->rotation = val;
+
+               if (intel_crtc->active && intel_crtc->primary_enabled) {
+                       intel_crtc_wait_for_pending_flips(crtc);
+
+                       /* FBC does not work on some platforms for rotated 
planes */
+                       if (dev_priv->fbc.plane == intel_crtc->plane &&
+                           INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+                           intel_plane->rotation != BIT(DRM_ROTATE_0))
+                               intel_disable_fbc(dev);
+                       dev_priv->display.update_primary_plane(crtc, 
crtc->primary->fb,
+                                               0, 0);
+
+               } else {
+                       DRM_DEBUG_KMS("[CRTC:%d] is not active. Only rotation 
property is updated\n",
+                                       crtc->base.id);
+               }
+       }
+
+       return 0;
+}
+
  static const struct drm_plane_funcs intel_primary_plane_funcs = {
        .update_plane = intel_primary_plane_setplane,
        .disable_plane = intel_primary_plane_disable,
        .destroy = intel_plane_destroy,
+       .set_property = intel_primary_plane_set_property
  };

  static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
@@ -11335,6 +11405,7 @@ static struct drm_plane 
*intel_primary_plane_create(struct drm_device *dev,
  {
        struct intel_plane *primary;
        const uint32_t *intel_primary_formats;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        int num_formats;

Here and elsewhere, you're adding dev_priv to remove it in the next
patch. A left over from putting the rotation property in drm_plane.

Yes..I will remove it from here and resend the patches.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to