From: Ville Syrjälä <ville.syrj...@linux.intel.com>
If the user is interested in getting accurate vblank sequence
numbers all the time they may disable the vblank disable timer
entirely. In that case it seems appropriate to kick start the
vblank interrupts already from drm_vblank_on().
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/drm_irq.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 82a039a..6376d96 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -1126,9 +1126,12 @@ void drm_vblank_on(struct drm_device *dev, int crtc)
vblank->last =
(dev->driver->get_vblank_counter(dev, crtc) - 1) &
dev->max_vblank_count;
-
- /* re-enable interrupts if there's are users left */
- if (atomic_read(&vblank->refcount) != 0)
+ /*
+ * re-enable interrupts if there are users left, or the
+ * user wishes vblank interrupts to be enabled all the time.
+ */
+ if (atomic_read(&vblank->refcount) != 0 ||
+ (!dev->vblank_disable_immediate && drm_vblank_offdelay < 0))
WARN_ON(drm_vblank_enable(dev, crtc));
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
--
1.8.5.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
