From: Ville Syrjälä <ville.syrj...@linux.intel.com>
Use the same code for enabling/disabling planes on all platforms. Rename
the functions to reflect that they're no longer specific to any
platform.
For now we leave the plane enable/disable to ccur at the same old
position in the modeset sequence.
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 134 +++++++++++++++--------------------
1 file changed, 56 insertions(+), 78 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index c65e7f7..3ee4995 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3634,7 +3634,49 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
hsw_enable_ips(intel_crtc);
}
-static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+{
+ if (!enable && intel_crtc->overlay) {
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&dev->struct_mutex);
+ dev_priv->mm.interruptible = false;
+ (void) intel_overlay_switch_off(intel_crtc->overlay);
+ dev_priv->mm.interruptible = true;
+ mutex_unlock(&dev->struct_mutex);
+ }
+
+ /* Let userspace switch the overlay on again. In most cases userspace
+ * has to recompute where to put it anyway.
+ */
+}
+
+/**
+ * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
+ * cursor plane briefly if not already running after enabling the display
+ * plane.
+ * This workaround avoids occasional blank screens when self refresh is
+ * enabled.
+ */
+static void
+g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ u32 cntl = I915_READ(CURCNTR(pipe));
+
+ if ((cntl & CURSOR_MODE) == 0) {
+ u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
+
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
+ I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
+ intel_wait_for_vblank(dev_priv->dev, pipe);
+ I915_WRITE(CURCNTR(pipe), cntl);
+ I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self);
+ }
+}
+
+static void intel_crtc_enable_planes(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3644,7 +3686,11 @@ static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
intel_enable_primary_hw_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
+ /* The fixup needs to happen before cursor is enabled */
+ if (IS_G4X(dev))
+ g4x_fixup_plane(dev_priv, pipe);
intel_crtc_update_cursor(crtc, true);
+ intel_crtc_dpms_overlay(intel_crtc, true);
hsw_enable_ips(intel_crtc);
@@ -3653,7 +3699,7 @@ static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
mutex_unlock(&dev->struct_mutex);
}
-static void ilk_crtc_disable_planes(struct drm_crtc *crtc)
+static void intel_crtc_disable_planes(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3669,6 +3715,7 @@ static void ilk_crtc_disable_planes(struct drm_crtc *crtc)
hsw_disable_ips(intel_crtc);
+ intel_crtc_dpms_overlay(intel_crtc, false);
intel_crtc_update_cursor(crtc, false);
intel_disable_planes(crtc);
intel_disable_primary_hw_plane(dev_priv, plane, pipe);
@@ -3726,7 +3773,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
if (HAS_PCH_CPT(dev))
cpt_verify_modeset(dev, intel_crtc->pipe);
- ilk_crtc_enable_planes(crtc);
+ intel_crtc_enable_planes(crtc);
/*
* There seems to be a race in PCH platform hw (at least on some
@@ -3829,7 +3876,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
haswell_mode_set_planes_workaround(intel_crtc);
- ilk_crtc_enable_planes(crtc);
+ intel_crtc_enable_planes(crtc);
drm_vblank_on(dev, pipe);
}
@@ -3861,7 +3908,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- ilk_crtc_disable_planes(crtc);
+ intel_crtc_disable_planes(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
@@ -3924,7 +3971,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- ilk_crtc_disable_planes(crtc);
+ intel_crtc_disable_planes(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
@@ -3970,48 +4017,6 @@ static void haswell_crtc_off(struct drm_crtc *crtc)
intel_ddi_put_crtc_pll(crtc);
}
-static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
-{
- if (!enable && intel_crtc->overlay) {
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- mutex_lock(&dev->struct_mutex);
- dev_priv->mm.interruptible = false;
- (void) intel_overlay_switch_off(intel_crtc->overlay);
- dev_priv->mm.interruptible = true;
- mutex_unlock(&dev->struct_mutex);
- }
-
- /* Let userspace switch the overlay on again. In most cases userspace
- * has to recompute where to put it anyway.
- */
-}
-
-/**
- * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
- * cursor plane briefly if not already running after enabling the display
- * plane.
- * This workaround avoids occasional blank screens when self refresh is
- * enabled.
- */
-static void
-g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
- u32 cntl = I915_READ(CURCNTR(pipe));
-
- if ((cntl & CURSOR_MODE) == 0) {
- u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
-
- I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
- I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
- intel_wait_for_vblank(dev_priv->dev, pipe);
- I915_WRITE(CURCNTR(pipe), cntl);
- I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
- I915_WRITE(FW_BLC_SELF, fw_bcl_self);
- }
-}
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -4315,7 +4320,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
bool is_dsi;
WARN_ON(!crtc->enabled);
@@ -4347,11 +4351,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
intel_wait_for_vblank(dev_priv->dev, pipe);
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
-
- intel_update_fbc(dev);
+ intel_crtc_enable_planes(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
@@ -4366,7 +4366,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
WARN_ON(!crtc->enabled);
@@ -4390,17 +4389,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
intel_wait_for_vblank(dev_priv->dev, pipe);
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- /* The fixup needs to happen before cursor is enabled */
- if (IS_G4X(dev))
- g4x_fixup_plane(dev_priv, pipe);
- intel_crtc_update_cursor(crtc, true);
-
- /* Give the overlay scaler a chance to enable if it's on this pipe */
- intel_crtc_dpms_overlay(intel_crtc, true);
-
- intel_update_fbc(dev);
+ intel_crtc_enable_planes(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
@@ -4430,7 +4419,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
if (!intel_crtc->active)
return;
@@ -4438,17 +4426,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
- /* Give the overlay scaler a chance to disable if it's on this pipe */
- intel_crtc_wait_for_pending_flips(crtc);
- drm_vblank_off(dev, pipe);
-
- if (dev_priv->fbc.plane == plane)
- intel_disable_fbc(dev);
-
- intel_crtc_dpms_overlay(intel_crtc, false);
- intel_crtc_update_cursor(crtc, false);
- intel_disable_planes(crtc);
- intel_disable_primary_hw_plane(dev_priv, plane, pipe);
+ intel_crtc_disable_planes(crtc);
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
intel_disable_pipe(dev_priv, pipe);
--
1.8.3.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
