On Wed, Feb 12, 2025 at 05:19:35PM +0530, Mohammed Thasleem wrote:
> Starting from MTL we don't have a platform agnostic way to validate
> DC6 state due to dc6 counter has been removed to validate DC state.
>
> The goal is to validate that the display HW can reach the DC6 power
> state. There is no HW DC6 residency counter (and there wasn't such
> a counter earlier either), so an alternative way is required. According
> to the HW team the display driver has programmed everything correctly in
> order to allow the DC6 power state if the DC5 power state is reached
> (indicated by the HW DC5 residency counter incrementing) and DC6 is
> enabled by the driver.
>
> Driver could take a snapshot of the DC5 residency counter right
> after it enables DC6 (dc5_residency_start) and increment the SW
> DC6 residency counter right before it disables DC6 or when user space
> reads the DC6 counter. So the driver would update the counter at these
> two points in the following way:
> dc6_residency_counter += dc5_current_count - dc5_start_count
>
> v2: Update the discription. (Imre)
> Read dc5 count during dc6 enable and disable then and update
> dc6 residency counter. (Imre)
> Remove variable from dmc structure. (Jani)
> Updated the subject title.
>
Cc: Imre Deak <imre.d...@intel.com>
perhaps a Suggested-by: Imre?
> Signed-off-by: Mohammed Thasleem <mohammed.thasl...@intel.com>
> ---
> .../gpu/drm/i915/display/intel_display_core.h | 2 ++
> .../i915/display/intel_display_power_well.c | 20 ++++++++++++++++++-
> drivers/gpu/drm/i915/display/intel_dmc.c | 14 ++++++++++---
> 3 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h
> b/drivers/gpu/drm/i915/display/intel_display_core.h
> index 554870d2494b..0a1e3dc2804f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_core.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_core.h
> @@ -490,6 +490,8 @@ struct intel_display {
>
> /* perform PHY state sanity checks? */
> bool chv_phy_assert[2];
> + unsigned int dc6_residency_counter;
let's avoid the 'residency' name because it generally means time in that state.
> + unsigned int dc5_start_count;
Also let's get some consistency counter or count, but not both.
> } power;
>
> struct {
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c
> b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> index f45a4f9ba23c..cfa53ee84323 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> @@ -17,6 +17,7 @@
> #include "intel_dkl_phy.h"
> #include "intel_dkl_phy_regs.h"
> #include "intel_dmc.h"
> +#include "intel_dmc_regs.h"
> #include "intel_dmc_wl.h"
> #include "intel_dp_aux_regs.h"
> #include "intel_dpio_phy.h"
> @@ -755,7 +756,7 @@ void gen9_sanitize_dc_state(struct intel_display *display)
> void gen9_set_dc_state(struct intel_display *display, u32 state)
> {
> struct i915_power_domains *power_domains = &display->power.domains;
> - u32 val;
> + u32 val, dc5_current_count;
> u32 mask;
>
> if (!HAS_DISPLAY(display))
> @@ -775,11 +776,28 @@ void gen9_set_dc_state(struct intel_display *display,
> u32 state)
> drm_err(display->drm, "DC state mismatch (0x%x -> 0x%x)\n",
> power_domains->dc_state, val & mask);
>
> + if (DISPLAY_VER(display) >= 14) {
> + /* If disabling DC6, update dc6_allowed counter */
> + if (!(state & DC_STATE_EN_UPTO_DC6) && (val &
> DC_STATE_EN_UPTO_DC6)) {
> + dc5_current_count = intel_de_read(display,
> DG1_DMC_DEBUG_DC5_COUNT);
> + display->power.dc6_residency_counter +=
> dc5_current_count - display->power.dc5_start_count;
try to keep this under 80 cols. If needed create a function to handle the
new counters.
But perhaps just reducing the size of the variable name above will help you
here and be enough.
> + display->power.dc5_start_count = dc5_current_count;
> + }
> + }
> +
> val &= ~mask;
> val |= state;
>
> gen9_write_dc_state(display, val);
>
> + if (DISPLAY_VER(display) >= 14) {
> + /* If enabling DC6, store DC5 count */
> + if ((state & DC_STATE_EN_UPTO_DC6)) {
> + dc5_current_count = intel_de_read(display,
> DG1_DMC_DEBUG_DC5_COUNT);
> + display->power.dc5_start_count = dc5_current_count;
> + }
> + }
> +
> power_domains->dc_state = val & mask;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c
> b/drivers/gpu/drm/i915/display/intel_dmc.c
> index 221d3abda791..e4d3ce796c99 100644
> --- a/drivers/gpu/drm/i915/display/intel_dmc.c
> +++ b/drivers/gpu/drm/i915/display/intel_dmc.c
> @@ -1242,6 +1242,7 @@ static int intel_dmc_debugfs_status_show(struct
> seq_file *m, void *unused)
> struct intel_dmc *dmc = display_to_dmc(display);
> intel_wakeref_t wakeref;
> i915_reg_t dc5_reg, dc6_reg = INVALID_MMIO_REG;
> + u32 dc5_current_count;
>
> if (!HAS_DMC(display))
> return -ENODEV;
> @@ -1290,9 +1291,16 @@ static int intel_dmc_debugfs_status_show(struct
> seq_file *m, void *unused)
> }
>
> seq_printf(m, "DC3 -> DC5 count: %d\n", intel_de_read(display,
> dc5_reg));
> - if (i915_mmio_reg_valid(dc6_reg))
> - seq_printf(m, "DC5 -> DC6 count: %d\n",
> - intel_de_read(display, dc6_reg));
> +
> + if (DISPLAY_VER(display) >= 14) {
> + dc5_current_count = intel_de_read(display, dc5_reg);
> + display->power.dc6_residency_counter += dc5_current_count -
> display->power.dc5_start_count;
> + seq_printf(m, "DC6 Residency Counter: %d\n",
> display->power.dc6_residency_counter);
I don't believe we should break the userspace here. Let's keep the old print
for every platform, but have a variable before the print message.
Something like:
if (DISPLAY_VER(display) >= 14)
dc6_count = //the math here
else
dc6_count = i915_mmio_reg_valid(dc6_reg) ? intel_de_read(display, dc6_reg) :
0;
seq_printf(m, "DC5 -> DC6 count: %d\n", dc6_count);
> + } else {
> + if (i915_mmio_reg_valid(dc6_reg))
I know, the old expectation is that when register is not valid it shouldn't
print. But also this is why I believe that perhaps this should be extended
to every platform, and not only for MTL+...
> + seq_printf(m, "DC5 -> DC6 count: %d\n",
> + intel_de_read(display, dc6_reg));
> + }
>
> seq_printf(m, "program base: 0x%08x\n",
> intel_de_read(display,
> DMC_PROGRAM(dmc->dmc_info[DMC_FW_MAIN].start_mmioaddr, 0)));
> --
> 2.43.0
>
