Fix all typos in files under drm/i915/gvt reported by codespell tool.
Signed-off-by: Nitin Gote <nitin.r.g...@intel.com>
---
drivers/gpu/drm/i915/gvt/cmd_parser.c | 4 ++--
drivers/gpu/drm/i915/gvt/dmabuf.c | 2 +-
drivers/gpu/drm/i915/gvt/edid.c | 2 +-
drivers/gpu/drm/i915/gvt/gtt.c | 2 +-
drivers/gpu/drm/i915/gvt/gvt.h | 8 +++++---
drivers/gpu/drm/i915/gvt/handlers.c | 6 +++---
drivers/gpu/drm/i915/gvt/kvmgt.c | 2 +-
drivers/gpu/drm/i915/gvt/mmio_context.c | 6 +++---
drivers/gpu/drm/i915/gvt/scheduler.c | 6 +++---
drivers/gpu/drm/i915/gvt/vgpu.c | 6 +++---
10 files changed, 23 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c
b/drivers/gpu/drm/i915/gvt/cmd_parser.c
index 6439c8e91a8d..f8af9659653d 100644
--- a/drivers/gpu/drm/i915/gvt/cmd_parser.c
+++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c
@@ -1924,7 +1924,7 @@ static int perform_bb_shadow(struct parser_exec_state *s)
/* the start_offset stores the batch buffer's start gma's
* offset relative to page boundary. so for non-privileged batch
* buffer, the shadowed gem object holds exactly the same page
- * layout as original gem object. This is for the convience of
+ * layout as original gem object. This is for the convenience of
* replacing the whole non-privilged batch buffer page to this
* shadowed one in PPGTT at the same gma address. (this replacing
* action is not implemented yet now, but may be necessary in
@@ -1976,7 +1976,7 @@ static int perform_bb_shadow(struct parser_exec_state *s)
/*
* ip_va saves the virtual address of the shadow batch buffer, while
* ip_gma saves the graphics address of the original batch buffer.
- * As the shadow batch buffer is just a copy from the originial one,
+ * As the shadow batch buffer is just a copy from the original one,
* it should be right to use shadow batch buffer'va and original batch
* buffer's gma in pair. After all, we don't want to pin the shadow
* buffer here (too early).
diff --git a/drivers/gpu/drm/i915/gvt/dmabuf.c
b/drivers/gpu/drm/i915/gvt/dmabuf.c
index 9efc3ca0ce82..4f599af766b0 100644
--- a/drivers/gpu/drm/i915/gvt/dmabuf.c
+++ b/drivers/gpu/drm/i915/gvt/dmabuf.c
@@ -436,7 +436,7 @@ int intel_vgpu_query_plane(struct intel_vgpu *vgpu, void
*args)
dmabuf_obj_get(dmabuf_obj);
}
ret = 0;
- gvt_dbg_dpy("vgpu%d: re-use dmabuf_obj ref %d, id %d\n",
+ gvt_dbg_dpy("vgpu%d: reuse dmabuf_obj ref %d, id %d\n",
vgpu->id, kref_read(&dmabuf_obj->kref),
gfx_plane_info->dmabuf_id);
mutex_unlock(&vgpu->dmabuf_lock);
diff --git a/drivers/gpu/drm/i915/gvt/edid.c b/drivers/gpu/drm/i915/gvt/edid.c
index 0a357ca42db1..89147d33168c 100644
--- a/drivers/gpu/drm/i915/gvt/edid.c
+++ b/drivers/gpu/drm/i915/gvt/edid.c
@@ -298,7 +298,7 @@ static int gmbus3_mmio_read(struct intel_vgpu *vgpu,
unsigned int offset,
int byte_count = byte_left;
u32 reg_data = 0;
- /* Data can only be recevied if previous settings correct */
+ /* Data can only be received if previous settings correct */
if (vgpu_vreg_t(vgpu, PCH_GMBUS1) & GMBUS_SLAVE_READ) {
if (byte_left <= 0) {
memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 1bce1493b86f..03056ae15858 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -1259,7 +1259,7 @@ static int ppgtt_populate_shadow_entry(struct intel_vgpu
*vgpu,
gvt_vdbg_mm("shadow 64K gtt entry\n");
/*
* The layout of 64K page is special, the page size is
- * controlled by uper PDE. To be simple, we always split
+ * controlled by upper PDE. To be simple, we always split
* 64K page to smaller 4K pages in shadow PT.
*/
return split_64KB_gtt_entry(vgpu, spt, index, &se);
diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h
index 2c95aeef4e41..b967700f416f 100644
--- a/drivers/gpu/drm/i915/gvt/gvt.h
+++ b/drivers/gpu/drm/i915/gvt/gvt.h
@@ -452,8 +452,10 @@ void intel_vgpu_free_resource(struct intel_vgpu *vgpu);
void intel_vgpu_write_fence(struct intel_vgpu *vgpu,
u32 fence, u64 value);
-/* Macros for easily accessing vGPU virtual/shadow register.
- Explicitly seperate use for typed MMIO reg or real offset.*/
+/*
+ * Macros for easily accessing vGPU virtual/shadow register.
+ * Explicitly separate use for typed MMIO reg or real offset.
+ */
#define vgpu_vreg_t(vgpu, reg) \
(*(u32 *)(vgpu->mmio.vreg + i915_mmio_reg_offset(reg)))
#define vgpu_vreg(vgpu, offset) \
@@ -702,7 +704,7 @@ static inline void intel_gvt_mmio_set_cmd_write_patch(
* @offset: register offset
*
* Returns:
- * True if GPU commmand write to an MMIO should be patched
+ * True if GPU command write to an MMIO should be patched
*/
static inline bool intel_gvt_mmio_is_cmd_write_patch(
struct intel_gvt *gvt, unsigned int offset)
diff --git a/drivers/gpu/drm/i915/gvt/handlers.c
b/drivers/gpu/drm/i915/gvt/handlers.c
index 241cff0fc683..c1e24453b849 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -689,11 +689,11 @@ static void vgpu_update_refresh_rate(struct intel_vgpu
*vgpu)
u32 new_rate = 0;
u32 *old_rate = &(intel_vgpu_port(vgpu,
vgpu->display.port_num)->vrefresh_k);
- /* Calcuate pixel clock by (ls_clk * M / N) */
+ /* Calculate pixel clock by (ls_clk * M / N) */
pixel_clk = div_u64(mul_u32_u32(link_m, dp_br), link_n);
pixel_clk *= MSEC_PER_SEC;
- /* Calcuate refresh rate by (pixel_clk / (h_total * v_total)) */
+ /* Calculate refresh rate by (pixel_clk / (h_total * v_total))
*/
new_rate = DIV64_U64_ROUND_CLOSEST(mul_u64_u32_shr(pixel_clk,
MSEC_PER_SEC, 0), mul_u32_u32(htotal + 1, vtotal + 1));
if (*old_rate != new_rate)
@@ -2001,7 +2001,7 @@ static int elsp_mmio_write(struct intel_vgpu *vgpu,
unsigned int offset,
* vGPU reset, it's set on D0->D3 on PCI config write, and cleared after
* vGPU reset if in resuming.
* In S0ix exit, the device power state also transite from D3 to D0 as
- * S3 resume, but no vGPU reset (triggered by QEMU devic model). After
+ * S3 resume, but no vGPU reset (triggered by QEMU device model). After
* S0ix exit, all engines continue to work. However the d3_entered
* remains set which will break next vGPU reset logic (miss the expected
* PPGTT invalidation).
diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c
index b27ff77bfb50..69830a5c49d3 100644
--- a/drivers/gpu/drm/i915/gvt/kvmgt.c
+++ b/drivers/gpu/drm/i915/gvt/kvmgt.c
@@ -142,7 +142,7 @@ static int gvt_pin_guest_page(struct intel_vgpu *vgpu,
unsigned long gfn,
int ret;
/*
- * We pin the pages one-by-one to avoid allocating a big arrary
+ * We pin the pages one-by-one to avoid allocating a big array
* on stack to hold pfns.
*/
for (npage = 0; npage < total_pages; npage++) {
diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c
b/drivers/gpu/drm/i915/gvt/mmio_context.c
index 273db14fd5fc..2f7208843367 100644
--- a/drivers/gpu/drm/i915/gvt/mmio_context.c
+++ b/drivers/gpu/drm/i915/gvt/mmio_context.c
@@ -53,7 +53,7 @@ struct engine_mmio {
u32 value;
};
-/* Raw offset is appened to each line for convenience. */
+/* Raw offset is append to each line for convenience. */
static struct engine_mmio gen8_engine_mmio_list[] __cacheline_aligned = {
{RCS0, RING_MODE_GEN7(RENDER_RING_BASE), 0xffff, false}, /* 0x229c */
{RCS0, GEN9_CTX_PREEMPT_REG, 0x0, false}, /* 0x2248 */
@@ -576,8 +576,8 @@ void intel_gvt_switch_mmio(struct intel_vgpu *pre,
/**
* We are using raw mmio access wrapper to improve the
- * performace for batch mmio read/write, so we need
- * handle forcewake mannually.
+ * performance for batch mmio read/write, so we need
+ * handle forcewake manually.
*/
intel_uncore_forcewake_get(engine->uncore, FORCEWAKE_ALL);
switch_mmio(pre, next, engine);
diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c
b/drivers/gpu/drm/i915/gvt/scheduler.c
index 23f2cc397ec9..dad217df0366 100644
--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -77,7 +77,7 @@ static void update_shadow_pdps(struct intel_vgpu_workload
*workload)
}
/*
- * when populating shadow ctx from guest, we should not overrride oa related
+ * when populating shadow ctx from guest, we should not override oa related
* registers, so that they will not be overlapped by guest oa configs. Thus
* made it possible to capture oa data from host for both host and guests.
*/
@@ -528,7 +528,7 @@ static int prepare_shadow_batch_buffer(struct
intel_vgpu_workload *workload)
int ret;
list_for_each_entry(bb, &workload->shadow_bb, list) {
- /* For privilge batch buffer and not wa_ctx, the bb_start_cmd_va
+ /* For privilege batch buffer and not wa_ctx, the
bb_start_cmd_va
* is only updated into ring_scan_buffer, not real ring address
* allocated in later copy_workload_to_ring_buffer. pls be noted
* shadow_ring_buffer_va is now pointed to real ring buffer va
@@ -1774,7 +1774,7 @@ intel_vgpu_create_workload(struct intel_vgpu *vgpu,
}
/**
- * intel_vgpu_queue_workload - Qeue a vGPU workload
+ * intel_vgpu_queue_workload - Queue a vGPU workload
* @workload: the workload to queue in
*/
void intel_vgpu_queue_workload(struct intel_vgpu_workload *workload)
diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c
index 63c751ca4119..11260392234a 100644
--- a/drivers/gpu/drm/i915/gvt/vgpu.c
+++ b/drivers/gpu/drm/i915/gvt/vgpu.c
@@ -78,7 +78,7 @@ void populate_pvinfo_page(struct intel_vgpu *vgpu)
* vGPU type name is defined as GVTg_Vx_y which contains the physical GPU
* generation type (e.g V4 as BDW server, V5 as SKL server).
*
- * Depening on the physical SKU resource, we might see vGPU types like
+ * Depending on the physical SKU resource, we might see vGPU types like
* GVTg_V4_8, GVTg_V4_4, GVTg_V4_2, etc. We can create different types of
* vGPU on same physical GPU depending on available resource. Each vGPU
* type will have a different number of avail_instance to indicate how
@@ -417,7 +417,7 @@ int intel_gvt_create_vgpu(struct intel_vgpu *vgpu,
* the whole vGPU to default state as when it is created. This vGPU function
* is required both for functionary and security concerns.The ultimate goal
* of vGPU FLR is that reuse a vGPU instance by virtual machines. When we
- * assign a vGPU to a virtual machine we must isse such reset first.
+ * assign a vGPU to a virtual machine we must issue such reset first.
*
* Full GT Reset and Per-Engine GT Reset are soft reset flow for GPU engines
* (Render, Blitter, Video, Video Enhancement). It is defined by GPU Spec.
@@ -428,7 +428,7 @@ int intel_gvt_create_vgpu(struct intel_vgpu *vgpu,
*
* The parameter dev_level is to identify if we will do DMLR or GT reset.
* The parameter engine_mask is to specific the engines that need to be
- * resetted. If value ALL_ENGINES is given for engine_mask, it means
+ * reset. If value ALL_ENGINES is given for engine_mask, it means
* the caller requests a full GT reset that we will reset all virtual
* GPU engines. For FLR, engine_mask is ignored.
*/
--
2.25.1
