There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from
TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.ja...@intel.com> (v4)
Signed-off-by: Mika Kahola <mika.kah...@intel.com>
---
.../gpu/drm/i915/display/intel_cx0_phy_regs.h | 7 ++++
drivers/gpu/drm/i915/display/intel_tc.c | 32 +++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
index f0e5c196eae4..c685479c9756 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
@@ -200,6 +200,13 @@
#define XELPDP_SSC_ENABLE_PLLA REG_BIT(1)
#define XELPDP_SSC_ENABLE_PLLB REG_BIT(0)
+#define TCSS_DISP_MAILBOX_IN_CMD _MMIO(0x161300)
+#define TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY REG_BIT(31)
+#define TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK REG_GENMASK(7, 0)
+#define TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
REG_FIELD_PREP(TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK, val)
+
+#define TCSS_DISP_MAILBOX_IN_DATA _MMIO(0x161304)
+
/* C10 Vendor Registers */
#define PHY_C10_VDR_PLL(idx) (0xC00 + (idx))
#define C10_PLL0_FRACEN REG_BIT8(4)
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c
b/drivers/gpu/drm/i915/display/intel_tc.c
index b16c4d2d4077..82e82e8ec11a 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -1013,15 +1013,47 @@ xelpdp_tc_phy_wait_for_tcss_power(struct intel_tc_port
*tc, bool enabled)
return true;
}
+/*
+ * Gfx driver WA 14020908590 for PTL tcss_rxdetect_clkswb_req/ack
+ * handshake violation when pwwreq= 0->1 during TC7/10 entry
+ */
+static void xelpdp_tc_power_request_wa(struct intel_display *display, bool
enable)
+{
+ /* check if mailbox is running busy */
+ if (intel_de_wait_for_clear(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+ drm_dbg_kms(display->drm,
+ "Timeout waiting for TCSS mailbox run/busy bit to
clear\n");
+ return;
+ }
+
+ intel_de_write(display, TCSS_DISP_MAILBOX_IN_DATA, enable ? 1 : 0);
+ intel_de_write(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY |
+ TCSS_DISP_MAILBOX_IN_CMD_DATA(0x1));
+
+ /* wait to clear mailbox running busy bit before continuing */
+ if (intel_de_wait_for_clear(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+ drm_dbg_kms(display->drm,
+ "Timeout after writing data to mailbox. Mailbox
run/busy bit did not clear\n");
+ return;
+ }
+}
+
static void __xelpdp_tc_phy_enable_tcss_power(struct intel_tc_port *tc, bool
enable)
{
struct drm_i915_private *i915 = tc_to_i915(tc);
+ struct intel_display *display = &i915->display;
enum port port = tc->dig_port->base.port;
i915_reg_t reg = XELPDP_PORT_BUF_CTL1(i915, port);
u32 val;
assert_tc_cold_blocked(tc);
+ if (DISPLAY_VER(display) == 30)
+ xelpdp_tc_power_request_wa(display, enable);
+
val = intel_de_read(i915, reg);
if (enable)
val |= XELPDP_TCSS_POWER_REQUEST;
--
2.43.0
