From: Gareth Yu <gareth...@intel.com> Re-train the main link for the main link lost in MST. The previous version doesn't cover MST mode.
v5: Move link status check to the location which covers MST mode v6: Correct Tejas' email address in cc Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10902 Cc: Tejas Upadhyay <tejas.upadh...@intel.com> Cc: Matt Roper <matthew.d.ro...@intel.com> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com> Signed-off-by: Gareth Yu <gareth...@intel.com> --- drivers/gpu/drm/i915/display/intel_dp.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index e05e25cd4a94..8043740b4233 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -5891,16 +5891,6 @@ intel_dp_detect(struct drm_connector *connector, intel_dp_print_rates(intel_dp); - if (intel_dp->is_mst) { - /* - * If we are in MST mode then this connector - * won't appear connected or have anything - * with EDID on it - */ - status = connector_status_disconnected; - goto out; - } - /* * Some external monitors do not signal loss of link synchronization * with an IRQ_HPD, so force a link status check. @@ -5911,6 +5901,16 @@ intel_dp_detect(struct drm_connector *connector, return ret; } + if (intel_dp->is_mst) { + /* + * If we are in MST mode then this connector + * won't appear connected or have anything + * with EDID on it + */ + status = connector_status_disconnected; + goto out; + } + /* * Clearing NACK and defer counts to get their exact values * while reading EDID which are required by Compliance tests -- 2.25.1
