Thanks for your inputs. Actually for our use cases, the 'scaling_mode' property currently being used for 'lvds' & 'dp', cannot be used as it is.
For our use cases, we need to provide a fine level control to User, so as to be able to choose the LetterBox/Pillar-box modes & also the Manual mode with horizontal & vertical scaling ratios. Please provide suggestions, that how we can extend/reuse the 'scaling_mode' property here. Best regards Akash -----Original Message----- From: Chris Wilson [mailto:ch...@chris-wilson.co.uk] Sent: Wednesday, February 19, 2014 1:58 PM To: Goel, Akash Cc: intel-gfx@lists.freedesktop.org Subject: Re: [Intel-gfx] Request for feedback : New Panel-fitter property for connectors On Wed, Feb 19, 2014 at 06:13:53AM +0000, Goel, Akash wrote: > > Hello, > > We are planning to expose a new panel fitter property for the connectors. > We have some use cases like a full screen video playback, where we can flip > the frame buffer of any size irrespective of the pipe timings and enable the > panel fitter to do scaling instead of using the GPU. > Other use case is the Clone mode, where we can use the composed output of the > LFP on the external display, with panel fitter enabled, to avoid GPU > composition. > > Please provide inputs/comments on the same. > > Best regards > Akash > > -----Original Message----- > From: Goel, Akash > Sent: Tuesday, February 18, 2014 4:12 PM > To: intel-gfx@lists.freedesktop.org > Cc: Goel, Akash; G, Pallavi > Subject: [PATCH] drm/i915: Added a new Panel-fitter property for connectors > > From: Akash Goel <akash.g...@intel.com> > > Added a Panel-fitter enable/disable property support for the connectors. You are missing why you cannot reuse the connector property "scaling". -Chris -- Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
