As part of opregion setup, vbt is extracted from the opregion. Move
the vbt parts of opregion setup into its own function.
Signed-off-by: Radhakrishna Sripada <radhakrishna.srip...@intel.com>
---
drivers/gpu/drm/i915/display/intel_opregion.c | 143 ++++++++++--------
1 file changed, 76 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_opregion.c
b/drivers/gpu/drm/i915/display/intel_opregion.c
index bd654d773ca7..cf7312cfd94a 100644
--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -877,6 +877,81 @@ static int intel_load_vbt_firmware(struct drm_i915_private
*dev_priv)
return ret;
}
+static int intel_load_opregion_vbt(struct drm_i915_private *i915,
+ struct intel_opregion *opregion,
+ struct intel_vbt *vbt)
+{
+ const void *vbt_data;
+ u32 vbt_size;
+ void *base = opregion->header;
+
+ if (intel_load_vbt_firmware(i915) == 0)
+ goto out;
+
+ if (dmi_check_system(intel_no_opregion_vbt))
+ goto out;
+
+ if (opregion->header->over.major >= 2 && opregion->asle &&
+ opregion->asle->rvda && opregion->asle->rvds) {
+ resource_size_t rvda = opregion->asle->rvda;
+
+ /*
+ * opregion 2.0: rvda is the physical VBT address.
+ *
+ * opregion 2.1+: rvda is unsigned, relative offset from
+ * opregion base, and should never point within opregion.
+ */
+ if (opregion->header->over.major > 2 ||
+ opregion->header->over.minor >= 1) {
+ drm_WARN_ON(&i915->drm, rvda < OPREGION_SIZE);
+
+ rvda += opregion->asls;
+ }
+
+ opregion->rvda = memremap(rvda, opregion->asle->rvds,
+ MEMREMAP_WB);
+
+ vbt_data = opregion->rvda;
+ vbt_size = opregion->asle->rvds;
+ if (intel_bios_is_valid_vbt(vbt_data, vbt_size)) {
+ drm_dbg_kms(&i915->drm,
+ "Found valid VBT in ACPI OpRegion
(RVDA)\n");
+ vbt->vbt = vbt_data;
+ vbt->vbt_size = vbt_size;
+ goto out;
+ } else {
+ drm_dbg_kms(&i915->drm,
+ "Invalid VBT in ACPI OpRegion (RVDA)\n");
+ memunmap(opregion->rvda);
+ opregion->rvda = NULL;
+ }
+ }
+
+ vbt_data = base + OPREGION_VBT_OFFSET;
+ /*
+ * The VBT specification says that if the ASLE ext mailbox is not used
+ * its area is reserved, but on some CHT boards the VBT extends into the
+ * ASLE ext area. Allow this even though it is against the spec, so we
+ * do not end up rejecting the VBT on those boards (and end up not
+ * finding the LCD panel because of this).
+ */
+ vbt_size = (opregion->header->mboxes & MBOX_ASLE_EXT) ?
+ OPREGION_ASLE_EXT_OFFSET : OPREGION_SIZE;
+ vbt_size -= OPREGION_VBT_OFFSET;
+ if (intel_bios_is_valid_vbt(vbt_data, vbt_size)) {
+ drm_dbg_kms(&i915->drm,
+ "Found valid VBT in ACPI OpRegion (Mailbox #4)\n");
+ vbt->vbt = vbt_data;
+ vbt->vbt_size = vbt_size;
+ } else {
+ drm_dbg_kms(&i915->drm,
+ "Invalid VBT in ACPI OpRegion (Mailbox #4)\n");
+ }
+
+out:
+ return 0;
+}
+
int intel_opregion_setup(struct drm_i915_private *dev_priv)
{
struct intel_opregion *opregion = &dev_priv->display.opregion;
@@ -886,8 +961,6 @@ int intel_opregion_setup(struct drm_i915_private *dev_priv)
char buf[sizeof(OPREGION_SIGNATURE)];
int err = 0;
void *base;
- const void *vbt_data;
- u32 vbt_size;
BUILD_BUG_ON(sizeof(struct opregion_header) != 0x100);
BUILD_BUG_ON(sizeof(struct opregion_acpi) != 0x100);
@@ -968,71 +1041,7 @@ int intel_opregion_setup(struct drm_i915_private
*dev_priv)
drm_dbg(&dev_priv->drm, "Mailbox #2 for backlight present\n");
}
- if (intel_load_vbt_firmware(dev_priv) == 0)
- goto out;
-
- if (dmi_check_system(intel_no_opregion_vbt))
- goto out;
-
- if (opregion->header->over.major >= 2 && opregion->asle &&
- opregion->asle->rvda && opregion->asle->rvds) {
- resource_size_t rvda = opregion->asle->rvda;
-
- /*
- * opregion 2.0: rvda is the physical VBT address.
- *
- * opregion 2.1+: rvda is unsigned, relative offset from
- * opregion base, and should never point within opregion.
- */
- if (opregion->header->over.major > 2 ||
- opregion->header->over.minor >= 1) {
- drm_WARN_ON(&dev_priv->drm, rvda < OPREGION_SIZE);
-
- rvda += opregion->asls;
- }
-
- opregion->rvda = memremap(rvda, opregion->asle->rvds,
- MEMREMAP_WB);
-
- vbt_data = opregion->rvda;
- vbt_size = opregion->asle->rvds;
- if (intel_bios_is_valid_vbt(vbt_data, vbt_size)) {
- drm_dbg_kms(&dev_priv->drm,
- "Found valid VBT in ACPI OpRegion
(RVDA)\n");
- vbt->vbt = vbt_data;
- vbt->vbt_size = vbt_size;
- goto out;
- } else {
- drm_dbg_kms(&dev_priv->drm,
- "Invalid VBT in ACPI OpRegion (RVDA)\n");
- memunmap(opregion->rvda);
- opregion->rvda = NULL;
- }
- }
-
- vbt_data = base + OPREGION_VBT_OFFSET;
- /*
- * The VBT specification says that if the ASLE ext mailbox is not used
- * its area is reserved, but on some CHT boards the VBT extends into the
- * ASLE ext area. Allow this even though it is against the spec, so we
- * do not end up rejecting the VBT on those boards (and end up not
- * finding the LCD panel because of this).
- */
- vbt_size = (mboxes & MBOX_ASLE_EXT) ?
- OPREGION_ASLE_EXT_OFFSET : OPREGION_SIZE;
- vbt_size -= OPREGION_VBT_OFFSET;
- if (intel_bios_is_valid_vbt(vbt_data, vbt_size)) {
- drm_dbg_kms(&dev_priv->drm,
- "Found valid VBT in ACPI OpRegion (Mailbox #4)\n");
- vbt->vbt = vbt_data;
- vbt->vbt_size = vbt_size;
- } else {
- drm_dbg_kms(&dev_priv->drm,
- "Invalid VBT in ACPI OpRegion (Mailbox #4)\n");
- }
-
-out:
- return 0;
+ return intel_load_opregion_vbt(dev_priv, opregion, vbt);
err_out:
memunmap(base);
--
2.34.1
