On 10/25/2023 6:20 PM, Ville Syrjälä wrote:
On Wed, Oct 25, 2023 at 05:43:18PM +0530, Ankit Nautiyal wrote:
At the moment the max requested bpc is limited to 6 to 10/12.
For platforms that support DSC, min and max src bpc with DSC are
different.
Account for DSC bpc limitations, when setting min and max value for
max_requested_bpc property.
NAK. DSC capabiliies change dynamically, the property does not.
Hmm, perhaps I should remove the check for sink DSC support and have
only Platform check HAS_DSC.
The problem I am trying to fix is that our HW does not support DSC with
6bpc, but we are allowing the max_requested_bpc to be 6 bpc.
This can be a problem with some eDP panels that support modes like
4k@120 which will always need DSC and when max requested bpc property is
set to 6.
I am wondering how to avoid this. Does it make sense to have the min
value for the max_requested_bpc to be 8, for platforms that support DSC?
Regards,
Ankit
Signed-off-by: Ankit Nautiyal <ankit.k.nauti...@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
b/drivers/gpu/drm/i915/display/intel_dp.c
index abc718f1a878..1935b9014b12 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5907,8 +5907,17 @@ intel_dp_add_properties(struct intel_dp *intel_dp,
struct drm_connector *connect
intel_attach_broadcast_rgb_property(connector);
if (HAS_GMCH(dev_priv))
drm_connector_attach_max_bpc_property(connector, 6, 10);
- else if (DISPLAY_VER(dev_priv) >= 5)
- drm_connector_attach_max_bpc_property(connector, 6, 12);
+ else if (DISPLAY_VER(dev_priv) >= 5) {
+ int min_bpc = 6, max_bpc = 12;
+ struct intel_connector *intel_connector =
to_intel_connector(connector);
+
+ if (HAS_DSC(dev_priv) &&
drm_dp_sink_supports_dsc(intel_connector->dp.dsc_dpcd)) {
+ min_bpc = intel_dp_dsc_min_src_input_bpc(dev_priv);
+ max_bpc = intel_dp_dsc_max_src_input_bpc(dev_priv);
+ }
+
+ drm_connector_attach_max_bpc_property(connector, min_bpc,
max_bpc);
+ }
/* Register HDMI colorspace for case of lspcon */
if
(intel_bios_encoder_is_lspcon(dp_to_dig_port(intel_dp)->base.devdata)) {
--
2.40.1
