Any comments?

Thanks and Regards,
Arun R Murthy
--------------------

> -----Original Message-----
> From: Murthy, Arun R <arun.r.mur...@intel.com>
> Sent: Friday, July 14, 2023 11:08 AM
> To: intel-gfx@lists.freedesktop.org
> Cc: Murthy, Arun R <arun.r.mur...@intel.com>
> Subject: [PATCH] drm/i915/dp: Fix LT debug print in SDP CRC enable
> 
> The debug print for enabling SDP CRC16 is applicable only for DP2.0, but this
> debug print was not within the uhbr check and was always printed.
> Fis this by adding proper checks and returning.
> 
> Signed-off-by: Arun R Murthy <arun.r.mur...@intel.com>
> ---
>  .../gpu/drm/i915/display/intel_dp_link_training.c    | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index a263773f4d68..4485ef4f8ec6 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -1390,11 +1390,13 @@ void intel_dp_128b132b_sdp_crc16(struct
> intel_dp *intel_dp,
>        * Default value of bit 31 is '0' hence discarding the write
>        * TODO: Corrective actions on SDP corruption yet to be defined
>        */
> -     if (intel_dp_is_uhbr(crtc_state))
> -             /* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */
> -             drm_dp_dpcd_writeb(&intel_dp->aux,
> -
> DP_SDP_ERROR_DETECTION_CONFIGURATION,
> -                                DP_SDP_CRC16_128B132B_EN);
> +     if (!intel_dp_is_uhbr(crtc_state))
> +             return;
> +
> +     /* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */
> +     drm_dp_dpcd_writeb(&intel_dp->aux,
> +                        DP_SDP_ERROR_DETECTION_CONFIGURATION,
> +                        DP_SDP_CRC16_128B132B_EN);
> 
>       lt_dbg(intel_dp, DP_PHY_DPRX, "DP2.0 SDP CRC16 for 128b/132b
> enabled\n");  }
> --
> 2.25.1

Reply via email to