Hi Daniel, Thanks for your valuable review. I found that Rodrigo has submitted a solution for the same issue just before mine. I am seeing that solution is aligning to the expectations. http://lists.freedesktop.org/archives/intel-gfx/2014-January/038749.html
So may be we can ignore this submission. Thanks and Regards, Ramalingam C. > -----Original Message----- > From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter > Sent: Sunday, January 26, 2014 1:41 AM > To: C, Ramalingam > Cc: [email protected] > Subject: Re: [Intel-gfx] [PATCH] drm/i915: Redoing the PSR setup on resume > > On Fri, Jan 24, 2014 at 12:50:17AM +0530, Ramalingam C wrote: > > Due to switch between console and graphics modes multiple psr_enable > > call will be made. On such occasions, to avoid repeated psr_setup, a > > flag called psr_setup_done is used. > > > > On suspend-resume, panel goes for a power cycle. Hence PSR setup > > should be redone to enable the PSR after suspend-resume. > > So this patch resets the corresponding flag, if it is set during the > > panel powerup process. > > > > Signed-off-by: Ramalingam C <[email protected]> > > --- > > drivers/gpu/drm/i915/intel_ddi.c | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c > > b/drivers/gpu/drm/i915/intel_ddi.c > > index 74749c6..686f8f6 100644 > > --- a/drivers/gpu/drm/i915/intel_ddi.c > > +++ b/drivers/gpu/drm/i915/intel_ddi.c > > @@ -1201,6 +1201,11 @@ static void intel_ddi_pre_enable(struct > intel_encoder *intel_encoder) > > if (type == INTEL_OUTPUT_EDP) { > > struct intel_dp *intel_dp = enc_to_intel_dp(encoder); > > ironlake_edp_panel_on(intel_dp); > > + > > + /* Resetting the flag, to redo the PSR setup after > > + * panel powercycle */ > > + if (intel_dp->psr_setup_done) > > + intel_dp->psr_setup_done = false; > > Imo it's better to add this as an encoder->reset callback. That one is only > called > on resume (at least in -nightly), so fits exactly. Resetting this flag in > every > pre_enable is a bit much imo. > > Also it sounds like we need to extend Rodrigo's psr testcase with a > suspend/resume subtest. > -Daniel > > > } > > > > WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE); > > -- > > 1.7.9.5 > > > > _______________________________________________ > > Intel-gfx mailing list > > [email protected] > > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
