On Wed, 05 Jul 2023, Ville Syrjala <ville.syrj...@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Instead of operating on the output the user specified (via the
> connector) the current code tends to operate on whichever outputs
> it has detected as attached. That is not how the kms uapi is supposed
> to work. So simply get rid of attached_outputs and instead directly
> operate on the output the user has specified.
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Acked-by: Jani Nikula <jani.nik...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_sdvo.c | 31 ++++++++++++-----------
> 1 file changed, 16 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c
> b/drivers/gpu/drm/i915/display/intel_sdvo.c
> index fcf3a95393d9..29762716a067 100644
> --- a/drivers/gpu/drm/i915/display/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
> @@ -103,12 +103,6 @@ struct intel_sdvo {
> /* Pixel clock limitations reported by the SDVO device, in kHz */
> int pixel_clock_min, pixel_clock_max;
>
> - /*
> - * For multiple function SDVO device,
> - * this is for current attached outputs.
> - */
> - u16 attached_output;
> -
> /*
> * Hotplug activation bits for this device
> */
> @@ -1223,12 +1217,13 @@ static bool intel_sdvo_set_tv_format(struct
> intel_sdvo *intel_sdvo,
>
> static bool
> intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo,
> + struct intel_sdvo_connector
> *intel_sdvo_connector,
> const struct drm_display_mode *mode)
> {
> struct intel_sdvo_dtd output_dtd;
>
> if (!intel_sdvo_set_target_output(intel_sdvo,
> - intel_sdvo->attached_output))
> + intel_sdvo_connector->output_flag))
> return false;
>
> intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
> @@ -1369,7 +1364,9 @@ static int intel_sdvo_compute_config(struct
> intel_encoder *encoder,
> * the sequence to do it. Oh well.
> */
> if (IS_TV(intel_sdvo_connector)) {
> - if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode))
> + if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
> +
> intel_sdvo_connector,
> + mode))
> return -EINVAL;
>
> (void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
> @@ -1387,7 +1384,9 @@ static int intel_sdvo_compute_config(struct
> intel_encoder *encoder,
> if (ret)
> return ret;
>
> - if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
> fixed_mode))
> + if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
> +
> intel_sdvo_connector,
> + fixed_mode))
> return -EINVAL;
>
> (void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
> @@ -1528,7 +1527,7 @@ static void intel_sdvo_pre_enable(struct
> intel_atomic_state *state,
> * channel on the motherboard. In a two-input device, the first input
> * will be SDVOB and the second SDVOC.
> */
> - in_out.in0 = intel_sdvo->attached_output;
> + in_out.in0 = intel_sdvo_connector->output_flag;
> in_out.in1 = 0;
>
> intel_sdvo_set_value(intel_sdvo,
> @@ -1537,7 +1536,7 @@ static void intel_sdvo_pre_enable(struct
> intel_atomic_state *state,
>
> /* Set the output timings to the screen */
> if (!intel_sdvo_set_target_output(intel_sdvo,
> - intel_sdvo->attached_output))
> + intel_sdvo_connector->output_flag))
> return;
>
> /* lvds has a special fixed output timing. */
> @@ -1874,6 +1873,8 @@ static void intel_enable_sdvo(struct intel_atomic_state
> *state,
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_sdvo *intel_sdvo = to_sdvo(encoder);
> + struct intel_sdvo_connector *intel_sdvo_connector =
> + to_intel_sdvo_connector(conn_state->connector);
> struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
> u32 temp;
> bool input1, input2;
> @@ -1903,7 +1904,7 @@ static void intel_enable_sdvo(struct intel_atomic_state
> *state,
> if (0)
> intel_sdvo_set_encoder_power_state(intel_sdvo,
> DRM_MODE_DPMS_ON);
> - intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
> + intel_sdvo_set_active_outputs(intel_sdvo,
> intel_sdvo_connector->output_flag);
>
> if (pipe_config->has_audio)
> intel_sdvo_enable_audio(intel_sdvo, pipe_config, conn_state);
> @@ -2158,8 +2159,6 @@ intel_sdvo_detect(struct drm_connector *connector, bool
> force)
> if (response == 0)
> return connector_status_disconnected;
>
> - intel_sdvo->attached_output = response;
> -
> if ((intel_sdvo_connector->output_flag & response) == 0)
> ret = connector_status_disconnected;
> else if (IS_TMDS(intel_sdvo_connector))
> @@ -2287,6 +2286,8 @@ static const struct drm_display_mode sdvo_tv_modes[] = {
> static int intel_sdvo_get_tv_modes(struct drm_connector *connector)
> {
> struct intel_sdvo *intel_sdvo =
> intel_attached_sdvo(to_intel_connector(connector));
> + struct intel_sdvo_connector *intel_sdvo_connector =
> + to_intel_sdvo_connector(connector);
> const struct drm_connector_state *conn_state = connector->state;
> struct intel_sdvo_sdtv_resolution_request tv_res;
> u32 reply = 0, format_map = 0;
> @@ -2304,7 +2305,7 @@ static int intel_sdvo_get_tv_modes(struct drm_connector
> *connector)
> memcpy(&tv_res, &format_map,
> min(sizeof(format_map), sizeof(struct
> intel_sdvo_sdtv_resolution_request)));
>
> - if (!intel_sdvo_set_target_output(intel_sdvo,
> intel_sdvo->attached_output))
> + if (!intel_sdvo_set_target_output(intel_sdvo,
> intel_sdvo_connector->output_flag))
> return 0;
>
> BUILD_BUG_ON(sizeof(tv_res) != 3);
--
Jani Nikula, Intel Open Source Graphics Center
