Looks good imo, just a bit patch polish. And maybe wait for Ville's
confirmation about the stuff we're discussing in private.
-Daniel
On Fri, Jan 17, 2014 at 09:58:03AM -0700, Todd Previte wrote:
> For HSW+ platforms, enable the 5.4Ghz (HBR2) link rate for devices that
> support it. The
> sink device must report that is supports Displayport 1.2 and the HBR2 bit
> rate in the
> DPCD in order to use HBR2.
>
> V2:
> - Added training pattern 3 flag to intel_dp struct
> - Added check for appropriate hardware to 5.4Ghz link rate configuration
> - Added a check for TPS3 supprt in the DPCD read
> - Adjusted channel equalization to use TPS3 when appropriate
> - Cleaned up whitespace
Commit message shouldn't be indented (git will do that when displaying a
patch automatically) and should be limited to about 70 chars (for to have
a bit of space in 80 char mails when replying). Also a white line before
the sob-section.
> Signed-off-by: Todd Previte <tprev...@gmail.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 30 ++++++++++++++++++++++++------
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 2 files changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 7df5085..fd87c37 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -102,7 +102,11 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp)
> case DP_LINK_BW_2_7:
> break;
> case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */
> - max_link_bw = DP_LINK_BW_2_7;
> + if ((IS_HSW(dev) || (INTEL_INFO(dev)->gen >= 8)) &&
> + (intel_dp->dpcd[DP_DPCD_REV] >= 0x12))
Checkpatch is still a bit unhappy about the alignment of the 2-line
condition here, and I concur - imo doing this as suggest helps readiblity
quite a bit.
> + max_link_bw = DP_LINK_BW_5_4;
> + else
> + max_link_bw = DP_LINK_BW_2_7;
> break;
> default:
> WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
> @@ -805,9 +809,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> struct intel_connector *intel_connector = intel_dp->attached_connector;
> int lane_count, clock;
> int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
> - int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 :
> 0;
> + /* Conveniently, the link BW constants become indices with a shift...*/
> + int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
> int bpp, mode_rate;
> - static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
> + static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
> int link_avail, link_clock;
>
> if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
> @@ -2621,10 +2626,15 @@ intel_dp_complete_link_train(struct intel_dp
> *intel_dp)
> bool channel_eq = false;
> int tries, cr_tries;
> uint32_t DP = intel_dp->DP;
> + uint32_t training_pattern = DP_TRAINING_PATTERN_2;
> +
> + /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
Indentation of the comment.
> + if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3)
> + training_pattern = DP_TRAINING_PATTERN_3;
>
> /* channel equalization */
> if (!intel_dp_set_link_train(intel_dp, &DP,
> - DP_TRAINING_PATTERN_2 |
> + training_pattern |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to start channel equalization\n");
> return;
> @@ -2652,7 +2662,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
> if (!drm_dp_clock_recovery_ok(link_status,
> intel_dp->lane_count)) {
> intel_dp_start_link_train(intel_dp);
> intel_dp_set_link_train(intel_dp, &DP,
> - DP_TRAINING_PATTERN_2 |
> + training_pattern |
> DP_LINK_SCRAMBLING_DISABLE);
> cr_tries++;
> continue;
> @@ -2668,7 +2678,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
> intel_dp_link_down(intel_dp);
> intel_dp_start_link_train(intel_dp);
> intel_dp_set_link_train(intel_dp, &DP,
> - DP_TRAINING_PATTERN_2 |
> + training_pattern |
> DP_LINK_SCRAMBLING_DISABLE);
> tries = 0;
> cr_tries++;
> @@ -2810,6 +2820,14 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> }
> }
>
> + /* Training Pattern 3 support */
> + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
> + intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) {
Another 2-line condition which should be aligned.
> + intel_dp->use_tps3 = true;
> + DRM_DEBUG_KMS("Displayport TPS3 supported");
> + } else
> + intel_dp->use_tps3 = false;
> +
> if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> DP_DWN_STRM_PORT_PRESENT))
> return true; /* native DP sink */
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 9841f78..e934d8d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -488,6 +488,7 @@ struct intel_dp {
> struct delayed_work panel_vdd_work;
> bool want_panel_vdd;
> bool psr_setup_done;
> + bool use_tps3;
> struct intel_connector *attached_connector;
> };
>
> --
> 1.8.1.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
