Validate basic api for GT freq control. Also test
interaction with GT reset. We skip rps tests with
SLPC enabled, this will re-introduce some coverage.
SLPC selftests are already covering some other workload
related scenarios.
v2: Rename test (Rodrigo)
v3: Review comments (Ashutosh)
v4: Skip when SLPC is disabled. Check for enable_guc is
not sufficient as kernel config may have it but the
platform doesn't actually support it.
Reviewed-by: Ashutosh Dixit <ashutosh.di...@intel.com>
Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaum...@intel.com>
---
tests/i915/i915_pm_freq_api.c | 152 ++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
2 files changed, 153 insertions(+)
create mode 100644 tests/i915/i915_pm_freq_api.c
diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c
new file mode 100644
index 00000000..f0f4e3f9
--- /dev/null
+++ b/tests/i915/i915_pm_freq_api.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2023 Intel Corporation
+ */
+
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <stdlib.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "drmtest.h"
+#include "i915/gem.h"
+#include "igt_sysfs.h"
+#include "igt.h"
+
+IGT_TEST_DESCRIPTION("Test SLPC freq API");
+/*
+ * Too many intermediate components and steps before freq is adjusted
+ * Specially if workload is under execution, so let's wait 100 ms.
+ */
+#define ACT_FREQ_LATENCY_US 100000
+
+static uint32_t get_freq(int dirfd, uint8_t id)
+{
+ uint32_t val;
+
+ igt_assert(igt_sysfs_rps_scanf(dirfd, id, "%u", &val) == 1);
+
+ return val;
+}
+
+static int set_freq(int dirfd, uint8_t id, uint32_t val)
+{
+ return igt_sysfs_rps_printf(dirfd, id, "%u", val);
+}
+
+static void test_freq_basic_api(int dirfd, int gt)
+{
+ uint32_t rpn, rp0, rpe;
+
+ /* Save frequencies */
+ rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ);
+ rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ);
+ rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ);
+ igt_info("System min freq: %dMHz; max freq: %dMHz\n", rpn, rp0);
+
+ /*
+ * Negative bound tests
+ * RPn is the floor
+ * RP0 is the ceiling
+ */
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn - 1) < 0);
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rp0 + 1) < 0);
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn - 1) < 0);
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rp0 + 1) < 0);
+
+ /* Assert min requests are respected from rp0 to rpn */
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rp0) > 0);
+ igt_assert(get_freq(dirfd, RPS_MIN_FREQ_MHZ) == rp0);
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpe) > 0);
+ igt_assert(get_freq(dirfd, RPS_MIN_FREQ_MHZ) == rpe);
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0);
+ igt_assert(get_freq(dirfd, RPS_MIN_FREQ_MHZ) == rpn);
+
+ /* Assert max requests are respected from rpn to rp0 */
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0);
+ igt_assert(get_freq(dirfd, RPS_MAX_FREQ_MHZ) == rpn);
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpe) > 0);
+ igt_assert(get_freq(dirfd, RPS_MAX_FREQ_MHZ) == rpe);
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rp0) > 0);
+ igt_assert(get_freq(dirfd, RPS_MAX_FREQ_MHZ) == rp0);
+
+}
+
+static void test_reset(int i915, int dirfd, int gt)
+{
+ uint32_t rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ);
+ int fd;
+
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0);
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0);
+ usleep(ACT_FREQ_LATENCY_US);
+ igt_assert(get_freq(dirfd, RPS_MIN_FREQ_MHZ) == rpn);
+
+ /* Manually trigger a GT reset */
+ fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY);
+ igt_require(fd >= 0);
+ igt_ignore_warn(write(fd, "1\n", 2));
+ close(fd);
+
+ igt_assert(get_freq(dirfd, RPS_MIN_FREQ_MHZ) == rpn);
+ igt_assert(get_freq(dirfd, RPS_MAX_FREQ_MHZ) == rpn);
+}
+
+igt_main
+{
+ int i915 = -1;
+ uint32_t *stash_min, *stash_max;
+
+ igt_fixture {
+ int num_gts, dirfd, gt;
+
+ i915 = drm_open_driver(DRIVER_INTEL);
+ igt_require_gem(i915);
+ /* i915_pm_rps already covers execlist path */
+ igt_skip_on_f(!i915_is_slpc_enabled(i915),
+ "This test is supported only with SLPC
enabled\n");
+
+ num_gts = igt_sysfs_get_num_gt(i915);
+ stash_min = (uint32_t*)malloc(sizeof(uint32_t) * num_gts);
+ stash_max = (uint32_t*)malloc(sizeof(uint32_t) * num_gts);
+
+ /* Save curr min and max across GTs */
+ for_each_sysfs_gt_dirfd(i915, dirfd, gt) {
+ stash_min[gt] = get_freq(dirfd, RPS_MIN_FREQ_MHZ);
+ stash_max[gt] = get_freq(dirfd, RPS_MAX_FREQ_MHZ);
+ }
+ }
+
+ igt_describe("Test basic API for controlling min/max GT frequency");
+ igt_subtest_with_dynamic_f("freq-basic-api") {
+ int dirfd, gt;
+
+ for_each_sysfs_gt_dirfd(i915, dirfd, gt)
+ igt_dynamic_f("gt%u", gt)
+ test_freq_basic_api(dirfd, gt);
+ }
+
+ igt_describe("Test basic freq API works after a reset");
+ igt_subtest_with_dynamic_f("freq-reset") {
+ int dirfd, gt;
+
+ for_each_sysfs_gt_dirfd(i915, dirfd, gt)
+ igt_dynamic_f("gt%u", gt)
+ test_reset(i915, dirfd, gt);
+ }
+
+ igt_fixture {
+ int dirfd, gt;
+ /* Restore frequencies */
+ for_each_sysfs_gt_dirfd(i915, dirfd, gt) {
+ igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ,
stash_max[gt]) > 0);
+ igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ,
stash_min[gt]) > 0);
+ }
+ close(i915);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index da31e782..46109f10 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -202,6 +202,7 @@ i915_progs = [
'gem_workarounds',
'i915_fb_tiling',
'i915_getparams_basic',
+ 'i915_pm_freq_api',
'i915_hangman',
'i915_hwmon',
'i915_module_load',
--
2.38.1
