On 4/5/23 18:25, Alex Williamson wrote:
> On Wed, 5 Apr 2023 14:04:51 +0000
> "Liu, Yi L" <yi.l....@intel.com> wrote:
>
>> Hi Eric,
>>
>>> From: Eric Auger <eric.au...@redhat.com>
>>> Sent: Wednesday, April 5, 2023 8:20 PM
>>>
>>> Hi Yi,
>>> On 4/1/23 16:44, Yi Liu wrote:
>>>> for the users that accept device fds passed from management stacks to be
>>>> able to figure out the host reset affected devices among the devices
>>>> opened by the user. This is needed as such users do not have BDF (bus,
>>>> devfn) knowledge about the devices it has opened, hence unable to use
>>>> the information reported by existing VFIO_DEVICE_GET_PCI_HOT_RESET_INFO
>>>> to figure out the affected devices.
>>>>
>>>> Signed-off-by: Yi Liu <yi.l....@intel.com>
>>>> ---
>>>> drivers/vfio/pci/vfio_pci_core.c | 58 ++++++++++++++++++++++++++++----
>>>> include/uapi/linux/vfio.h | 24 ++++++++++++-
>>>> 2 files changed, 74 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/vfio/pci/vfio_pci_core.c
>>>> b/drivers/vfio/pci/vfio_pci_core.c
>>>> index 19f5b075d70a..a5a7e148dce1 100644
>>>> --- a/drivers/vfio/pci/vfio_pci_core.c
>>>> +++ b/drivers/vfio/pci/vfio_pci_core.c
>>>> @@ -30,6 +30,7 @@
>>>> #if IS_ENABLED(CONFIG_EEH)
>>>> #include <asm/eeh.h>
>>>> #endif
>>>> +#include <uapi/linux/iommufd.h>
>>>>
>>>> #include "vfio_pci_priv.h"
>>>>
>>>> @@ -767,6 +768,20 @@ static int vfio_pci_get_irq_count(struct
>>> vfio_pci_core_device *vdev, int irq_typ
>>>> return 0;
>>>> }
>>>>
>>>> +static struct vfio_device *
>>>> +vfio_pci_find_device_in_devset(struct vfio_device_set *dev_set,
>>>> + struct pci_dev *pdev)
>>>> +{
>>>> + struct vfio_device *cur;
>>>> +
>>>> + lockdep_assert_held(&dev_set->lock);
>>>> +
>>>> + list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
>>>> + if (cur->dev == &pdev->dev)
>>>> + return cur;
>>>> + return NULL;
>>>> +}
>>>> +
>>>> static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
>>>> {
>>>> (*(int *)data)++;
>>>> @@ -776,13 +791,20 @@ static int vfio_pci_count_devs(struct pci_dev *pdev,
>>>> void
>>> *data)
>>>> struct vfio_pci_fill_info {
>>>> int max;
>>>> int cur;
>>>> + bool require_devid;
>>>> + struct iommufd_ctx *iommufd;
>>>> + struct vfio_device_set *dev_set;
>>>> struct vfio_pci_dependent_device *devices;
>>>> };
>>>>
>>>> static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
>>>> {
>>>> struct vfio_pci_fill_info *fill = data;
>>>> + struct vfio_device_set *dev_set = fill->dev_set;
>>>> struct iommu_group *iommu_group;
>>>> + struct vfio_device *vdev;
>>>> +
>>>> + lockdep_assert_held(&dev_set->lock);
>>>>
>>>> if (fill->cur == fill->max)
>>>> return -EAGAIN; /* Something changed, try again */
>>>> @@ -791,7 +813,21 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev,
>>>> void
>>> *data)
>>>> if (!iommu_group)
>>>> return -EPERM; /* Cannot reset non-isolated devices */
>>>>
>>>> - fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
>>>> + if (fill->require_devid) {
>>>> + /*
>>>> + * Report dev_id of the devices that are opened as cdev
>>>> + * and have the same iommufd with the fill->iommufd.
>>>> + * Otherwise, just fill IOMMUFD_INVALID_ID.
>>>> + */
>>>> + vdev = vfio_pci_find_device_in_devset(dev_set, pdev);
>>>> + if (vdev && vfio_device_cdev_opened(vdev) &&
>>>> + fill->iommufd == vfio_iommufd_physical_ictx(vdev))
>>>> + vfio_iommufd_physical_devid(vdev, &fill->devices[fill-
>>>> cur].dev_id);
>>>> + else
>>>> + fill->devices[fill->cur].dev_id = IOMMUFD_INVALID_ID;
>>>> + } else {
>>>> + fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
>>>> + }
>>>> fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
>>>> fill->devices[fill->cur].bus = pdev->bus->number;
>>>> fill->devices[fill->cur].devfn = pdev->devfn;
>>>> @@ -1230,17 +1266,27 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
>>>> return -ENOMEM;
>>>>
>>>> fill.devices = devices;
>>>> + fill.dev_set = vdev->vdev.dev_set;
>>>>
>>>> + mutex_lock(&vdev->vdev.dev_set->lock);
>>>> + if (vfio_device_cdev_opened(&vdev->vdev)) {
>>>> + fill.require_devid = true;
>>>> + fill.iommufd = vfio_iommufd_physical_ictx(&vdev->vdev);
>>>> + }
>>>> ret = vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_fill_devs,
>>>> &fill, slot);
>>>> + mutex_unlock(&vdev->vdev.dev_set->lock);
>>>>
>>>> /*
>>>> * If a device was removed between counting and filling, we may come up
>>>> * short of fill.max. If a device was added, we'll have a return of
>>>> * -EAGAIN above.
>>>> */
>>>> - if (!ret)
>>>> + if (!ret) {
>>>> hdr.count = fill.cur;
>>>> + if (fill.require_devid)
>>>> + hdr.flags = VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID;
>>>> + }
>>>>
>>>> reset_info_exit:
>>>> if (copy_to_user(arg, &hdr, minsz))
>>>> @@ -2346,12 +2392,10 @@ static bool vfio_dev_in_files(struct
>>> vfio_pci_core_device *vdev,
>>>> static int vfio_pci_is_device_in_set(struct pci_dev *pdev, void *data)
>>>> {
>>>> struct vfio_device_set *dev_set = data;
>>>> - struct vfio_device *cur;
>>>>
>>>> - list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
>>>> - if (cur->dev == &pdev->dev)
>>>> - return 0;
>>>> - return -EBUSY;
>>>> + lockdep_assert_held(&dev_set->lock);
>>>> +
>>>> + return vfio_pci_find_device_in_devset(dev_set, pdev) ? 0 : -EBUSY;
>>>> }
>>>>
>>>> /*
>>>> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>>>> index 25432ef213ee..5a34364e3b94 100644
>>>> --- a/include/uapi/linux/vfio.h
>>>> +++ b/include/uapi/linux/vfio.h
>>>> @@ -650,11 +650,32 @@ enum {
>>>> * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
>>>> * struct
>>>> vfio_pci_hot_reset_info)
>>>> *
>>>> + * This command is used to query the affected devices in the hot reset for
>>>> + * a given device. User could use the information reported by this
>>>> command
>>>> + * to figure out the affected devices among the devices it has opened.
the 'opened' terminology does not look sufficient here because it is not
only a matter of the device being opened using cdev but it also needs to
have been bound to an iommufd, dev_id being the output of the
dev-iommufd binding.
By the way I am now confused. What does happen if the reset impact some
devices which are not bound to an iommu ctx. Previously we returned the
iommu group which always pre-exists but now you will report invalid id?
>>>> + * This command always reports the segment, bus and devfn information for
>>>> + * each affected device, and selectively report the group_id or the dev_id
>>>> + * per the way how the device being queried is opened.
>>>> + * - If the device is opened via the traditional group/container
>>>> manner,
>>>> + * this command reports the group_id for each affected device.
>>>> + *
>>>> + * - If the device is opened as a cdev, this command needs to
>>>> report
>>> s/needs to report/reports
>> got it.
>>
>>>> + * dev_id for each affected device and set the
>>>> + * VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID flag. For the affected
>>>> + * devices that are not opened as cdev or bound to different
>>>> iommufds
>>>> + * with the device that is queried, report an invalid dev_id to
>>>> avoid
or not bound at all
>>> s/bound to different iommufds with the device that is queried/bound to
>>> iommufds different from the reset device one?
>> hmmm, I'm not a native speaker here. This _INFO is to query if want
>> hot reset a given device, what devices would be affected. So it appears
>> the queried device is better. But I'd admit "the queried device" is also
>> "the reset device". may Alex help pick one. 😊
> - If the calling device is opened directly via cdev rather than
> accessed through the vfio group, the returned
> vfio_pci_depdendent_device structure reports the dev_id
> rather than the group_id, which is indicated by the
> VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID flag in
> vfio_pci_hot_reset_info. If the reset affects devices that
> are not opened within the same iommufd context as the calling
> device, IOMMUFD_INVALID_ID will be provided as the dev_id.
>
> But that kind of brings to light the question of what does the user do
> when they encounter this situation. If the device is not opened, the
> reset can complete. If the device is opened by a different user, the
> reset is blocked. The only logical conclusion is that the user should
> try the reset regardless of the result of the info ioctl, which the
> null-array approach further solidifies as the direction of the API.
> I'm not liking this. Thanks,
>
> Alex
Thanks
Eric
>
>
>>>> + * potential dev_id conflict as dev_id is local to iommufd. For
>>>> such
>>>> + * affected devices, user shall fall back to use the segment,
>>>> bus and
>>>> + * devfn info to map it to opened device.
>>>> + *
>>>> * Return: 0 on success, -errno on failure:
>>>> * -enospc = insufficient buffer, -enodev = unsupported for device.
>>>> */
>>>> struct vfio_pci_dependent_device {
>>>> - __u32 group_id;
>>>> + union {
>>>> + __u32 group_id;
>>>> + __u32 dev_id;
>>>> + };
>>>> __u16 segment;
>>>> __u8 bus;
>>>> __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
>>>> @@ -663,6 +684,7 @@ struct vfio_pci_dependent_device {
>>>> struct vfio_pci_hot_reset_info {
>>>> __u32 argsz;
>>>> __u32 flags;
>>>> +#define VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID (1 << 0)
>>>> __u32 count;
>>>> struct vfio_pci_dependent_device devices[];
>>>> };
>>> Eric
