On Mon, 16 Dec 2013, Chris Wilson <ch...@chris-wilson.co.uk> wrote: > Touching the VGA registers risks a hard machine hang, at least on this > ivb machine after removing a conflicting efifb. This is more than likely > related to the discovery that VGA IO decode on the more recent PCH > platforms is terminally broken.
Please double check the config space address. At a glance, it looks like we should be using SNB_GMCH_CTRL since SNB. Might explain the issues? > Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk> > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com> > --- > drivers/gpu/drm/i915/intel_display.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_display.c > b/drivers/gpu/drm/i915/intel_display.c > index 7db292c469af..d9b91a585dbf 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -11341,6 +11341,9 @@ int intel_modeset_vga_set_state(struct drm_device > *dev, bool state) > return -EIO; > } > > + if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state) > + return 0; > + I think I'd use a temp gmch_ctrl, make the change below on that, and then compare the new and old values. Just to avoid the use of negatives so much. Either way, the patch is Reviewed-by: Jani Nikula <jani.nik...@intel.com> *iff* it's still needed with the verified config space address. BR, Jani. > if (state) > gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; > else > -- > 1.8.5.1 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
