GuC will set the min/max frequencies to theoretical max on ATS-M. This will break kernel ABI, so limit min/max frequency to RP0(platform max) instead.
Also modify the SLPC selftest to update the min frequency when we have a server part so that we can iterate between platform min and max. v2: Check softlimits instead of platform limits (Riana) v3: More review comments (Ashutosh) v4: No need to use saved_min_freq and other comments (Ashutosh) Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7030 Acked-by: Nirmoy Das <nirmoy....@intel.com> Reviewed-by: Riana Tauro <riana.ta...@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaum...@intel.com> --- drivers/gpu/drm/i915/gt/selftest_slpc.c | 20 +++++----- drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c | 37 +++++++++++++++++++ drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h | 2 + .../gpu/drm/i915/gt/uc/intel_guc_slpc_types.h | 3 ++ 4 files changed, 53 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/selftest_slpc.c b/drivers/gpu/drm/i915/gt/selftest_slpc.c index 4c6e9257e593..82ec95a299f6 100644 --- a/drivers/gpu/drm/i915/gt/selftest_slpc.c +++ b/drivers/gpu/drm/i915/gt/selftest_slpc.c @@ -239,6 +239,11 @@ static int run_test(struct intel_gt *gt, int test_type) if (!intel_uc_uses_guc_slpc(>->uc)) return 0; + if (slpc->min_freq == slpc->rp0_freq) { + pr_err("Min/Max are fused to the same value\n"); + return -EINVAL; + } + if (igt_spinner_init(&spin, gt)) return -ENOMEM; @@ -253,17 +258,14 @@ static int run_test(struct intel_gt *gt, int test_type) } /* - * FIXME: With efficient frequency enabled, GuC can request - * frequencies higher than the SLPC max. While this is fixed - * in GuC, we level set these tests with RPn as min. + * Set min frequency to RPn so that we can test the whole + * range of RPn-RP0. This also turns off efficient freq + * usage and makes results more predictable. */ err = slpc_set_min_freq(slpc, slpc->min_freq); - if (err) + if (err) { + pr_err("Unable to update min freq!"); return err; - - if (slpc->min_freq == slpc->rp0_freq) { - pr_err("Min/Max are fused to the same value\n"); - return -EINVAL; } intel_gt_pm_wait_for_idle(gt); @@ -330,7 +332,7 @@ static int run_test(struct intel_gt *gt, int test_type) engine->name, max_act_freq); /* Actual frequency should rise above min */ - if (max_act_freq <= slpc_min_freq) { + if (max_act_freq <= slpc->min_freq) { pr_err("Actual freq did not rise above min\n"); pr_err("Perf Limit Reasons: 0x%x\n", intel_uncore_read(gt->uncore, GT0_PERF_LIMIT_REASONS)); diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c index fdd895f73f9f..c7e568af1e9c 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c @@ -263,6 +263,7 @@ int intel_guc_slpc_init(struct intel_guc_slpc *slpc) slpc->max_freq_softlimit = 0; slpc->min_freq_softlimit = 0; + slpc->min_is_rpmax = false; slpc->boost_freq = 0; atomic_set(&slpc->num_waiters, 0); @@ -588,6 +589,39 @@ static int slpc_set_softlimits(struct intel_guc_slpc *slpc) return 0; } +static bool is_slpc_min_freq_rpmax(struct intel_guc_slpc *slpc) +{ + struct drm_i915_private *i915 = slpc_to_i915(slpc); + int slpc_min_freq; + int ret; + + ret = intel_guc_slpc_get_min_freq(slpc, &slpc_min_freq); + if (ret) { + drm_err(&i915->drm, + "Failed to get min freq: (%d)\n", + ret); + return false; + } + + if (slpc_min_freq == SLPC_MAX_FREQ_MHZ) + return true; + else + return false; +} + +static void update_server_min_softlimit(struct intel_guc_slpc *slpc) +{ + /* For server parts, SLPC min will be at RPMax. + * Use min softlimit to clamp it to RP0 instead. + */ + if (!slpc->min_freq_softlimit && + is_slpc_min_freq_rpmax(slpc)) { + slpc->min_is_rpmax = true; + slpc->min_freq_softlimit = slpc->rp0_freq; + (slpc_to_gt(slpc))->defaults.min_freq = slpc->min_freq_softlimit; + } +} + static int slpc_use_fused_rp0(struct intel_guc_slpc *slpc) { /* Force SLPC to used platform rp0 */ @@ -647,6 +681,9 @@ int intel_guc_slpc_enable(struct intel_guc_slpc *slpc) slpc_get_rp_values(slpc); + /* Handle the case where min=max=RPmax */ + update_server_min_softlimit(slpc); + /* Set SLPC max limit to RP0 */ ret = slpc_use_fused_rp0(slpc); if (unlikely(ret)) { diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h index 82a98f78f96c..11975a31c9d0 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h @@ -9,6 +9,8 @@ #include "intel_guc_submission.h" #include "intel_guc_slpc_types.h" +#define SLPC_MAX_FREQ_MHZ 4250 + struct intel_gt; struct drm_printer; diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc_types.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc_types.h index 73d208123528..a6ef53b04e04 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc_types.h +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc_types.h @@ -19,6 +19,9 @@ struct intel_guc_slpc { bool supported; bool selected; + /* Indicates this is a server part */ + bool min_is_rpmax; + /* platform frequency limits */ u32 min_freq; u32 rp0_freq; -- 2.35.1
