From: Radhakrishna Sripada <radhakrishna.srip...@intel.com>
Add sequences for C10 phy enable/disable phy lane reset,
powerdown change sequence and phy lane programming.
Bspec: 64539, 67636, 65451, 65450, 64568
Cc: Imre Deak <imre.d...@intel.com>
Cc: Mika Kahola <mika.kah...@intel.com>
Cc: Uma Shankar <uma.shan...@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.srip...@intel.com>
Signed-off-by: Mika Kahola <mika.kah...@intel.com> (v9)
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/display/intel_cx0_phy.c | 352 ++++++++++++++++++-
drivers/gpu/drm/i915/display/intel_cx0_phy.h | 17 +
drivers/gpu/drm/i915/display/intel_ddi.c | 2 +
drivers/gpu/drm/i915/display/intel_dp.c | 15 +-
drivers/gpu/drm/i915/display/intel_dpll.c | 2 +
drivers/gpu/drm/i915/i915_reg.h | 141 ++++++++
7 files changed, 526 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index a26edcdadc21..994f87a12782 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -279,6 +279,7 @@ i915-y += \
display/icl_dsi.o \
display/intel_backlight.o \
display/intel_crt.o \
+ display/intel_cx0_phy.o \
display/intel_ddi.o \
display/intel_ddi_buf_trans.o \
display/intel_display_trace.o \
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index 2f401116d1d0..6ba11cd7cd75 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -526,9 +526,9 @@ void intel_c10mpllb_readout_hw_state(struct intel_encoder
*encoder,
tx0, cmn, phy_name(phy));
}
-__maybe_unused static void intel_c10_pll_program(struct drm_i915_private *i915,
- const struct intel_crtc_state
*crtc_state,
- struct intel_encoder *encoder)
+static void intel_c10_pll_program(struct drm_i915_private *i915,
+ const struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
{
const struct intel_c10mpllb_state *pll_state =
&crtc_state->c10mpllb_state;
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
@@ -633,6 +633,352 @@ int intel_c10mpllb_calc_port_clock(struct intel_encoder
*encoder,
10 << (tx_clk_div + 16));
}
+#define PHY_LANES_VAL_ARG(FIELD, lanes, arg) ({u32 __val; switch(lanes) {\
+ case INTEL_CX0_BOTH_LANES:
\
+ __val =
((XELPDP_LANE0_##FIELD(arg)) |\
+
(XELPDP_LANE1_##FIELD(arg))); \
+ break;
\
+ case INTEL_CX0_LANE0:
\
+ __val =
(XELPDP_LANE0_##FIELD(arg));\
+ break;
\
+ case INTEL_CX0_LANE1:
\
+ __val =
(XELPDP_LANE1_##FIELD(arg));\
+ break; \
+ }; __val; })
+
+#define PHY_LANES_VAL(FIELD, lanes) ({u32 __val; switch(lanes) {\
+ case INTEL_CX0_BOTH_LANES:
\
+ __val =
(XELPDP_LANE0_##FIELD | \
+
XELPDP_LANE1_##FIELD); \
+ break;
\
+ case INTEL_CX0_LANE0:
\
+ __val =
(XELPDP_LANE0_##FIELD); \
+ break;
\
+ case INTEL_CX0_LANE1:
\
+ __val =
(XELPDP_LANE1_##FIELD);\
+ break; \
+ }; __val; })
+
+static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
+ const struct intel_crtc_state
*crtc_state,
+ bool lane_reversal)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ struct intel_dp *intel_dp;
+ bool ssc_enabled;
+ u32 val = 0;
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL1(encoder->port),
XELPDP_PORT_REVERSAL,
+ lane_reversal ? XELPDP_PORT_REVERSAL : 0);
+
+ if (lane_reversal)
+ val |= XELPDP_LANE1_PHY_CLOCK_SELECT;
+
+ val |= XELPDP_FORWARD_CLOCK_UNGATE;
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
+
+ if (intel_crtc_has_dp_encoder(crtc_state)) {
+ intel_dp = enc_to_intel_dp(encoder);
+ ssc_enabled = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+ DP_MAX_DOWNSPREAD_0_5;
+
+ /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
+ val |= ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
+ }
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ XELPDP_LANE1_PHY_CLOCK_SELECT |
+ XELPDP_FORWARD_CLOCK_UNGATE |
+ XELPDP_DDI_CLOCK_SELECT_MASK |
+ XELPDP_SSC_ENABLE_PLLB, val);
+}
+
+static void intel_cx0_powerdown_change_sequence(struct drm_i915_private *i915,
+ enum port port,
+ enum intel_cx0_lanes lane, u8
state)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(POWERDOWN_NEW_STATE_MASK, lane),
+ PHY_LANES_VAL_ARG(POWERDOWN_NEW_STATE, lane, state));
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(POWERDOWN_UPDATE, lane),
+ PHY_LANES_VAL(POWERDOWN_UPDATE, lane));
+
+ /* Update Timeout Value */
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(POWERDOWN_UPDATE, lane), 0,
+ XELPDP_PORT_RESET_START_TIMEOUT_US, 0,
NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset
after %dus.\n",
+ phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US);
+}
+
+static void intel_cx0_setup_powerdown(struct drm_i915_private *i915, enum port
port)
+{
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_POWER_STATE_READY_MASK,
+ XELPDP_POWER_STATE_READY(CX0_P2_STATE_READY));
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL3(port),
+ XELPDP_POWER_STATE_ACTIVE_MASK |
+ XELPDP_PLL_LANE_STAGGERING_DELAY_MASK,
+ XELPDP_POWER_STATE_ACTIVE(CX0_P0_STATE_ACTIVE) |
+ XELPDP_PLL_LANE_STAGGERING_DELAY(0));
+}
+
+/* FIXME: Some Type-C cases need not reset both the lanes. Handle those cases.
*/
+static void intel_cx0_phy_lane_reset(struct drm_i915_private *i915, enum port
port,
+ bool lane_reversal)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ enum intel_cx0_lanes lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL1(port),
+ XELPDP_PORT_BUF_SOC_PHY_READY,
+ XELPDP_PORT_BUF_SOC_PHY_READY,
+ XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US, 0,
NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of SOC reset
after %dus.\n",
+ phy_name(phy), XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(PIPE_RESET, INTEL_CX0_BOTH_LANES),
+ PHY_LANES_VAL(PIPE_RESET, INTEL_CX0_BOTH_LANES));
+
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(PHY_CURRENT_STATUS,
INTEL_CX0_BOTH_LANES),
+ PHY_LANES_VAL(PHY_CURRENT_STATUS,
INTEL_CX0_BOTH_LANES),
+ XELPDP_PORT_RESET_START_TIMEOUT_US, 0,
NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset
after %dus.\n",
+ phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US);
+
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(port),
+ PHY_LANES_VAL(PCLK_REFCLK_REQUEST, lane),
+ PHY_LANES_VAL(PCLK_REFCLK_REQUEST, lane));
+
+ if (__intel_wait_for_register(&i915->uncore,
XELPDP_PORT_CLOCK_CTL(port),
+ PHY_LANES_VAL(PCLK_REFCLK_ACK, lane),
+ PHY_LANES_VAL(PCLK_REFCLK_ACK, lane),
+ XELPDP_REFCLK_ENABLE_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "PHY %c failed to request refclk after
%dus.\n",
+ phy_name(phy), XELPDP_REFCLK_ENABLE_TIMEOUT_US);
+
+ intel_cx0_powerdown_change_sequence(i915, port, INTEL_CX0_BOTH_LANES,
+ CX0_P2_STATE_RESET);
+ intel_cx0_setup_powerdown(i915, port);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(PIPE_RESET, INTEL_CX0_BOTH_LANES), 0);
+
+ if (intel_de_wait_for_clear(i915, XELPDP_PORT_BUF_CTL2(port),
+ PHY_LANES_VAL(PHY_CURRENT_STATUS,
+ INTEL_CX0_BOTH_LANES),
+ XELPDP_PORT_RESET_END_TIMEOUT))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset
after %dms.\n",
+ phy_name(phy), XELPDP_PORT_RESET_END_TIMEOUT);
+}
+
+static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
+ enum port port, int lane_count,
+ bool lane_reversal)
+{
+ u8 l0t1, l0t2, l1t1, l1t2;
+
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_MSGBUS_ACCESS, C10_VDR_CTRL_MSGBUS_ACCESS,
+ MB_WRITE_COMMITTED);
+
+ l0t1 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(1, 2));
+ l0t2 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2));
+ l1t1 = intel_cx0_read(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2));
+ l1t2 = intel_cx0_read(i915, port, 1, PHY_CX0_TX_CONTROL(2, 2));
+
+ if (lane_reversal) {
+ switch (lane_count) {
+ case 1:
+ /* Disable MLs 1(lane0), 2(lane0), 3(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2),
+ l1t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 2:
+ /* Disable MLs 1(lane0), 2(lane0) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2),
+ l0t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 3:
+ /* Disable MLs 1(lane0) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(1, 2),
+ l0t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ break;
+ }
+ } else {
+ switch (lane_count) {
+ case 1:
+ /* Disable MLs 2(lane0), 3(lane1), 4(lane1) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2),
+ l0t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 2:
+ /* Disable MLs 3(lane1), 4(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2),
+ l1t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 3:
+ /* Disable MLs 4(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(2, 2),
+ l1t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ break;
+ }
+ }
+
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_UPDATE_CFG, C10_VDR_CTRL_UPDATE_CFG,
MB_WRITE_COMMITTED);
+}
+
+static void intel_c10pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+ struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ enum intel_cx0_lanes maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+
+ /*
+ * 1. Program PORT_CLOCK_CTL REGISTER to configure
+ * clock muxes, gating and SSC
+ */
+ intel_program_port_clock_ctl(encoder, crtc_state, lane_reversal);
+
+ /* 2. Bring PHY out of reset. */
+ intel_cx0_phy_lane_reset(i915, encoder->port, lane_reversal);
+
+ /*
+ * 3. Change Phy power state to Ready.
+ * TODO: For DP alt mode use only one lane.
+ */
+ intel_cx0_powerdown_change_sequence(i915, encoder->port,
INTEL_CX0_BOTH_LANES,
+ CX0_P2_STATE_READY);
+
+ /* 4. Program PHY internal PLL internal registers. */
+ intel_c10_pll_program(i915, crtc_state, encoder);
+
+ /*
+ * 5. Program the enabled and disabled owned PHY lane
+ * transmitters over message bus
+ */
+ intel_c10_program_phy_lane(i915, encoder->port, crtc_state->lane_count,
lane_reversal);
+
+ /*
+ * 6. Follow the Display Voltage Frequency Switching - Sequence
+ * Before Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /*
+ * 7. Program DDI_CLK_VALFREQ to match intended DDI
+ * clock frequency.
+ */
+ intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port),
+ crtc_state->port_clock);
+ /*
+ * 8. Set PORT_CLOCK_CTL register PCLK PLL Request
+ * LN<Lane for maxPCLK> to "1" to enable PLL.
+ */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), 0,
+ PHY_LANES_VAL(PCLK_PLL_REQUEST, maxpclk_lane));
+
+ /* 9. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK> == "1".
*/
+ if (__intel_wait_for_register(&i915->uncore,
XELPDP_PORT_CLOCK_CTL(encoder->port),
+ PHY_LANES_VAL(PCLK_PLL_ACK, maxpclk_lane),
+ PHY_LANES_VAL(PCLK_PLL_ACK, maxpclk_lane),
+ XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US, 0,
NULL))
+ drm_warn(&i915->drm, "Port %c PLL not locked after %dus.\n",
+ phy_name(phy), XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US);
+
+ /*
+ * 10. Follow the Display Voltage Frequency Switching Sequence After
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+}
+
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+ intel_c10pll_enable(encoder, crtc_state);
+}
+
+static void intel_c10pll_disable(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+ struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ enum intel_cx0_lanes lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+
+ /* 1. Change owned PHY lane power to Disable state. */
+ intel_cx0_powerdown_change_sequence(i915, encoder->port,
INTEL_CX0_BOTH_LANES,
+ CX0_P2PG_STATE_DISABLE);
+
+ /*
+ * 2. Follow the Display Voltage Frequency Switching Sequence Before
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /*
+ * 3. Set PORT_CLOCK_CTL register PCLK PLL Request LN<Lane for maxPCLK>
+ * to "0" to disable PLL.
+ */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ PHY_LANES_VAL(PCLK_PLL_REQUEST, INTEL_CX0_BOTH_LANES) |
+ PHY_LANES_VAL(PCLK_REFCLK_REQUEST, INTEL_CX0_BOTH_LANES),
0);
+
+ /* 4. Program DDI_CLK_VALFREQ to 0. */
+ intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port), 0);
+
+ /*
+ * 5. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK**> == "0".
+ */
+ if (__intel_wait_for_register(&i915->uncore,
XELPDP_PORT_CLOCK_CTL(encoder->port),
+ PHY_LANES_VAL(PCLK_PLL_ACK, lane) |
+ PHY_LANES_VAL(PCLK_REFCLK_ACK, lane), 0,
+ XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US, 0,
NULL))
+ drm_warn(&i915->drm, "Port %c PLL not unlocked after %dus.\n",
+ phy_name(phy), XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US);
+
+ /*
+ * 6. Follow the Display Voltage Frequency Switching Sequence After
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ XELPDP_DDI_CLOCK_SELECT_MASK |
+ XELPDP_FORWARD_CLOCK_UNGATE, 0);
+}
+
+void intel_cx0pll_disable(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+ intel_c10pll_disable(encoder);
+}
+
+#undef PHY_LANES_VAL_ARG
+#undef PHY_LANES_VAL
+
void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
struct intel_crtc_state *new_crtc_state)
{
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
index cf1f300b6a7b..d12d2e2f02ee 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
@@ -106,6 +106,19 @@ enum intel_cx0_lanes {
#define C10_VDR_CTRL_UPDATE_CFG REG_BIT8(0)
#define PHY_C10_VDR_CUSTOM_WIDTH 0xD02
+#define CX0_P0_STATE_ACTIVE 0x0
+#define CX0_P2_STATE_READY 0x2
+#define CX0_P2PG_STATE_DISABLE 0x9
+#define CX0_P4PG_STATE_DISABLE 0xC
+#define CX0_P2_STATE_RESET 0x2
+
+/* PHY_C10_VDR_PLL0 */
+#define PLL_C10_MPLL_SSC_EN REG_BIT8(0)
+
+/* PIPE SPEC Defined Registers */
+#define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 +
(control))
+#define CONTROL2_DISABLE_SINGLE_TX REG_BIT(6)
+
static inline bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy
phy)
{
if (!IS_METEORLAKE(dev_priv))
@@ -114,6 +127,10 @@ static inline bool intel_is_c10phy(struct drm_i915_private
*dev_priv, enum phy p
return (phy < PHY_C);
}
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state);
+void intel_cx0pll_disable(struct intel_encoder *encoder);
+
void intel_c10mpllb_readout_hw_state(struct intel_encoder *encoder,
struct intel_c10mpllb_state *pll_state);
int intel_cx0mpllb_calc_state(struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
b/drivers/gpu/drm/i915/display/intel_ddi.c
index aaa8846c3b18..639ec604babf 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4384,6 +4384,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
enum port port)
encoder->pipe_mask = ~0;
if (DISPLAY_VER(dev_priv) >= 14) {
+ encoder->enable_clock = intel_cx0pll_enable;
+ encoder->disable_clock = intel_cx0pll_disable;
encoder->get_config = mtl_ddi_get_config;
} else if (IS_DG2(dev_priv)) {
encoder->enable_clock = intel_mpllb_enable;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
b/drivers/gpu/drm/i915/display/intel_dp.c
index 70b06806ec0d..db32799b5f46 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -420,6 +420,11 @@ static int ehl_max_source_rate(struct intel_dp *intel_dp)
return 810000;
}
+static int mtl_max_source_rate(struct intel_dp *intel_dp)
+{
+ return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
+}
+
static int vbt_max_link_rate(struct intel_dp *intel_dp)
{
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
@@ -444,6 +449,10 @@ static void
intel_dp_set_source_rates(struct intel_dp *intel_dp)
{
/* The values must be in increasing order */
+ static const int mtl_rates[] = {
+ 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000,
+ 810000,
+ };
static const int icl_rates[] = {
162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000,
1000000, 1350000,
@@ -469,7 +478,11 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
drm_WARN_ON(&dev_priv->drm,
intel_dp->source_rates || intel_dp->num_source_rates);
- if (DISPLAY_VER(dev_priv) >= 11) {
+ if (DISPLAY_VER(dev_priv) >= 14) {
+ source_rates = mtl_rates;
+ size = ARRAY_SIZE(mtl_rates);
+ max_rate = mtl_max_source_rate(intel_dp);
+ } else if (DISPLAY_VER(dev_priv) >= 11) {
source_rates = icl_rates;
size = ARRAY_SIZE(icl_rates);
if (IS_DG2(dev_priv))
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c
b/drivers/gpu/drm/i915/display/intel_dpll.c
index 73f541050913..d6fcdf4eba0e 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll.c
@@ -1533,6 +1533,8 @@ intel_dpll_init_clock_hook(struct drm_i915_private
*dev_priv)
{
if (DISPLAY_VER(dev_priv) >= 14)
dev_priv->display.funcs.dpll = &mtl_dpll_funcs;
+ else if (DISPLAY_VER(dev_priv) >= 14)
+ dev_priv->display.funcs.dpll = &mtl_dpll_funcs;
else if (IS_DG2(dev_priv))
dev_priv->display.funcs.dpll = &dg2_dpll_funcs;
else if (DISPLAY_VER(dev_priv) >= 9 || HAS_DDI(dev_priv))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5003a5ffbc6a..5e6ff9f2aa10 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2121,6 +2121,11 @@
#define TRANS_PUSH_EN REG_BIT(31)
#define TRANS_PUSH_SEND REG_BIT(30)
+/* DDI Buffer Control */
+#define _DDI_CLK_VALFREQ_A 0x64030
+#define _DDI_CLK_VALFREQ_B 0x64130
+#define DDI_CLK_VALFREQ(port) _MMIO_PORT(port, _DDI_CLK_VALFREQ_A,
_DDI_CLK_VALFREQ_B)
+
/*
* HSW+ eDP PSR registers
*
@@ -8375,4 +8380,140 @@ enum skl_power_gate {
#define MTL_MEDIA_GSI_BASE 0x380000
+#define PUNIT_MMIO_CR_POC_STRAPS _MMIO(0x281078)
+#define NUM_TILES_MASK REG_GENMASK(1, 0)
+#define CD_ALIVE REG_BIT(2)
+#define SOCKET_ID_MASK REG_GENMASK(7, 3)
+
+/* Define the BAR and offset for the accelerator fabric CSRs */
+#define CD_BASE_OFFSET 0x291000
+#define CD_BAR_SIZE (256 * 1024)
+
+/*
+ * In general, the i915 should not touch the IAF registers. The registers
+ * will be passed as an IO resource via the MFD interface. However, it
+ * is necessary to put the IRQ bits in a known state, before the MFD cell
+ * is registered.
+ *
+ * So define these registers for i915 usage.
+ */
+#define CPORT_MBDB_CSRS (CD_BASE_OFFSET + 0x6000)
+#define CPORT_MBDB_CSRS_END (CPORT_MBDB_CSRS + 0x1000)
+#define CPORT_MBDB_INT_ENABLE_MASK _MMIO(CPORT_MBDB_CSRS + 0x8)
+
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A 0x64040
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B 0x64140
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1 0x16F240
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2 0x16F440
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC3 0x16F640
+#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC4 0x16F840
+#define _XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) (_PICK(port, \
+ [PORT_A] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
+ [PORT_B] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
+ [PORT_TC1] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
+ [PORT_TC2] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2, \
+ [PORT_TC3] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC3, \
+ [PORT_TC4] =
_XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC4) + ((lane) * 4))
+
+#define XELPDP_PORT_M2P_MSGBUS_CTL(port, lane)
_MMIO(_XELPDP_PORT_M2P_MSGBUS_CTL(port, lane))
+#define XELPDP_PORT_M2P_TRANSACTION_PENDING REG_BIT(31)
+#define XELPDP_PORT_M2P_COMMAND_TYPE_MASK REG_GENMASK(30, 27)
+#define XELPDP_PORT_M2P_COMMAND_WRITE_UNCOMMITTED
REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x1)
+#define XELPDP_PORT_M2P_COMMAND_WRITE_COMMITTED
REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x2)
+#define XELPDP_PORT_M2P_COMMAND_READ
REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x3)
+#define XELPDP_PORT_M2P_DATA_MASK REG_GENMASK(23, 16)
+#define XELPDP_PORT_M2P_DATA(val)
REG_FIELD_PREP(XELPDP_PORT_M2P_DATA_MASK, val)
+#define XELPDP_PORT_M2P_TRANSACTION_RESET REG_BIT(15)
+#define XELPDP_PORT_M2P_ADDRESS_MASK REG_GENMASK(11, 0)
+#define XELPDP_PORT_M2P_ADDRESS(val)
REG_FIELD_PREP(XELPDP_PORT_M2P_ADDRESS_MASK, val)
+
+#define XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane)
_MMIO(_XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) + 8)
+#define XELPDP_PORT_P2M_RESPONSE_READY REG_BIT(31)
+#define XELPDP_PORT_P2M_COMMAND_TYPE_MASK REG_GENMASK(30, 27)
+#define XELPDP_PORT_P2M_COMMAND_READ_ACK 0x4
+#define XELPDP_PORT_P2M_COMMAND_WRITE_ACK 0x5
+#define XELPDP_PORT_P2M_DATA_MASK REG_GENMASK(23, 16)
+#define XELPDP_PORT_P2M_DATA(val)
REG_FIELD_PREP(XELPDP_PORT_P2M_DATA_MASK, val)
+#define XELPDP_PORT_P2M_ERROR_SET REG_BIT(15)
+
+#define XELPDP_MSGBUS_TIMEOUT_SLOW 1
+#define XELPDP_MSGBUS_TIMEOUT_FAST_US 2
+#define XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US 3200
+#define XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US 20
+#define XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US 100
+#define XELPDP_PORT_RESET_START_TIMEOUT_US 5
+#define XELPDP_PORT_RESET_END_TIMEOUT 15
+#define XELPDP_REFCLK_ENABLE_TIMEOUT_US 1
+
+#define _XELPDP_PORT_BUF_CTL1_LN0_A 0x64004
+#define _XELPDP_PORT_BUF_CTL1_LN0_B 0x64104
+#define _XELPDP_PORT_BUF_CTL1_LN0_USBC1 0x16F200
+#define _XELPDP_PORT_BUF_CTL1_LN0_USBC2 0x16F400
+#define _XELPDP_PORT_BUF_CTL1_LN0_USBC3 0x16F600
+#define _XELPDP_PORT_BUF_CTL1_LN0_USBC4 0x16F800
+#define _XELPDP_PORT_BUF_CTL1(port) (_PICK(port, \
+ [PORT_A] =
_XELPDP_PORT_BUF_CTL1_LN0_A, \
+ [PORT_B] =
_XELPDP_PORT_BUF_CTL1_LN0_B, \
+ [PORT_TC1] =
_XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
+ [PORT_TC2] =
_XELPDP_PORT_BUF_CTL1_LN0_USBC2, \
+ [PORT_TC3] =
_XELPDP_PORT_BUF_CTL1_LN0_USBC3, \
+ [PORT_TC4] =
_XELPDP_PORT_BUF_CTL1_LN0_USBC4))
+
+#define XELPDP_PORT_BUF_CTL1(port)
_MMIO(_XELPDP_PORT_BUF_CTL1(port))
+#define XELPDP_PORT_BUF_SOC_PHY_READY REG_BIT(24)
+#define XELPDP_PORT_REVERSAL REG_BIT(16)
+#define XELPDP_PORT_WIDTH_MASK REG_GENMASK(3,
1)
+#define XELPDP_PORT_WIDTH(val)
REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, val)
+
+#define XELPDP_PORT_BUF_CTL2(port)
_MMIO(_XELPDP_PORT_BUF_CTL1(port) + 4)
+#define XELPDP_LANE0_PIPE_RESET REG_BIT(31)
+#define XELPDP_LANE1_PIPE_RESET REG_BIT(30)
+#define XELPDP_LANE0_PHY_CURRENT_STATUS REG_BIT(29)
+#define XELPDP_LANE1_PHY_CURRENT_STATUS REG_BIT(28)
+#define XELPDP_LANE0_POWERDOWN_UPDATE REG_BIT(25)
+#define XELPDP_LANE1_POWERDOWN_UPDATE REG_BIT(24)
+#define XELPDP_LANE0_POWERDOWN_NEW_STATE_MASK REG_GENMASK(23, 20)
+#define XELPDP_LANE0_POWERDOWN_NEW_STATE(val)
REG_FIELD_PREP(XELPDP_LANE0_POWERDOWN_NEW_STATE_MASK, val)
+#define XELPDP_LANE1_POWERDOWN_NEW_STATE_MASK REG_GENMASK(19, 16)
+#define XELPDP_LANE1_POWERDOWN_NEW_STATE(val)
REG_FIELD_PREP(XELPDP_LANE1_POWERDOWN_NEW_STATE_MASK, val)
+#define XELPDP_POWER_STATE_READY_MASK REG_GENMASK(7, 4)
+#define XELPDP_POWER_STATE_READY(val)
REG_FIELD_PREP(XELPDP_POWER_STATE_READY_MASK, val)
+
+#define XELPDP_PORT_BUF_CTL3(port)
_MMIO(_XELPDP_PORT_BUF_CTL1(port) + 8)
+#define XELPDP_PLL_LANE_STAGGERING_DELAY_MASK REG_GENMASK(15, 8)
+#define XELPDP_PLL_LANE_STAGGERING_DELAY(val)
REG_FIELD_PREP(XELPDP_PLL_LANE_STAGGERING_DELAY_MASK, val)
+#define XELPDP_POWER_STATE_ACTIVE_MASK REG_GENMASK(3,
0)
+#define XELPDP_POWER_STATE_ACTIVE(val)
REG_FIELD_PREP(XELPDP_POWER_STATE_ACTIVE_MASK, val)
+
+#define _XELPDP_PORT_CLOCK_CTL_A 0x640E0
+#define _XELPDP_PORT_CLOCK_CTL_B 0x641E0
+#define _XELPDP_PORT_CLOCK_CTL_USBC1 0x16F260
+#define _XELPDP_PORT_CLOCK_CTL_USBC2 0x16F460
+#define _XELPDP_PORT_CLOCK_CTL_USBC3 0x16F660
+#define _XELPDP_PORT_CLOCK_CTL_USBC4 0x16F860
+#define XELPDP_PORT_CLOCK_CTL(port) _MMIO(_PICK(port, \
+ [PORT_A] =
_XELPDP_PORT_CLOCK_CTL_A, \
+ [PORT_B] =
_XELPDP_PORT_CLOCK_CTL_B, \
+ [PORT_TC1] =
_XELPDP_PORT_CLOCK_CTL_USBC1, \
+ [PORT_TC2] =
_XELPDP_PORT_CLOCK_CTL_USBC2, \
+ [PORT_TC3] =
_XELPDP_PORT_CLOCK_CTL_USBC3, \
+ [PORT_TC4] =
_XELPDP_PORT_CLOCK_CTL_USBC4))
+
+#define XELPDP_LANE0_PCLK_PLL_REQUEST REG_BIT(31)
+#define XELPDP_LANE0_PCLK_PLL_ACK REG_BIT(30)
+#define XELPDP_LANE0_PCLK_REFCLK_REQUEST REG_BIT(29)
+#define XELPDP_LANE0_PCLK_REFCLK_ACK REG_BIT(28)
+#define XELPDP_LANE1_PCLK_PLL_REQUEST REG_BIT(27)
+#define XELPDP_LANE1_PCLK_PLL_ACK REG_BIT(26)
+#define XELPDP_LANE1_PCLK_REFCLK_REQUEST REG_BIT(25)
+#define XELPDP_LANE1_PCLK_REFCLK_ACK REG_BIT(24)
+#define XELPDP_DDI_CLOCK_SELECT_MASK REG_GENMASK(15, 12)
+#define XELPDP_DDI_CLOCK_SELECT(val)
REG_FIELD_PREP(XELPDP_DDI_CLOCK_SELECT_MASK, val)
+#define XELPDP_DDI_CLOCK_SELECT_NONE 0x0
+#define XELPDP_DDI_CLOCK_SELECT_MAXPCLK 0x8
+#define XELPDP_FORWARD_CLOCK_UNGATE REG_BIT(10)
+#define XELPDP_LANE1_PHY_CLOCK_SELECT REG_BIT(8)
+#define XELPDP_SSC_ENABLE_PLLA REG_BIT(1)
+#define XELPDP_SSC_ENABLE_PLLB REG_BIT(0)
+
#endif /* _I915_REG_H_ */
--
2.34.1
