On Tue, 08 Mar 2022, Ville Syrjala <ville.syrj...@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Use chv_calc_dpll_params() to calculate the BXT DP DPLL VCO
> frequency.
>
> We need to add the m1 divider into bxt_dp_clk_val[] for this to work.
>
> v2: Make the WARN_ON() sensible
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
I admit I didn't check all the computations, but the drm_WARN_ON()
should catch any functional changes AFAICT.
Reviewed-by: Jani Nikula <jani.nik...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 23 +++++++++++--------
> 1 file changed, 13 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 4b52086aa9e9..b7071da4b7e5 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -2086,13 +2086,13 @@ static bool bxt_ddi_pll_get_hw_state(struct
> drm_i915_private *dev_priv,
> /* pre-calculated values for DP linkrates */
> static const struct dpll bxt_dp_clk_val[] = {
> /* m2 is .22 binary fixed point */
> - { .dot = 162000, .p1 = 4, .p2 = 2, .n = 1, .m2 = 0x819999a /* 32.4 */ },
> - { .dot = 270000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x6c00000 /* 27.0 */ },
> - { .dot = 540000, .p1 = 2, .p2 = 1, .n = 1, .m2 = 0x6c00000 /* 27.0 */ },
> - { .dot = 216000, .p1 = 3, .p2 = 2, .n = 1, .m2 = 0x819999a /* 32.4 */ },
> - { .dot = 243000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x6133333 /* 24.3 */ },
> - { .dot = 324000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x819999a /* 32.4 */ },
> - { .dot = 432000, .p1 = 3, .p2 = 1, .n = 1, .m2 = 0x819999a /* 32.4 */ },
> + { .dot = 162000, .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a /*
> 32.4 */ },
> + { .dot = 270000, .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 /*
> 27.0 */ },
> + { .dot = 540000, .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 /*
> 27.0 */ },
> + { .dot = 216000, .p1 = 3, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a /*
> 32.4 */ },
> + { .dot = 243000, .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6133333 /*
> 24.3 */ },
> + { .dot = 324000, .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x819999a /*
> 32.4 */ },
> + { .dot = 432000, .p1 = 3, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x819999a /*
> 32.4 */ },
> };
>
> static bool
> @@ -2122,18 +2122,21 @@ bxt_ddi_hdmi_pll_dividers(struct intel_crtc_state
> *crtc_state,
> static void bxt_ddi_dp_pll_dividers(struct intel_crtc_state *crtc_state,
> struct dpll *clk_div)
> {
> - int clock = crtc_state->port_clock;
> + struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
> int i;
>
> *clk_div = bxt_dp_clk_val[0];
> for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) {
> - if (bxt_dp_clk_val[i].dot == clock) {
> + if (crtc_state->port_clock == bxt_dp_clk_val[i].dot) {
> *clk_div = bxt_dp_clk_val[i];
> break;
> }
> }
>
> - clk_div->vco = clock * 10 / 2 * clk_div->p1 * clk_div->p2;
> + chv_calc_dpll_params(i915->dpll.ref_clks.nssc, clk_div);
> +
> + drm_WARN_ON(&i915->drm, clk_div->vco == 0 ||
> + clk_div->dot != crtc_state->port_clock);
> }
>
> static bool bxt_ddi_set_dpll_hw_state(struct intel_crtc_state *crtc_state,
--
Jani Nikula, Intel Open Source Graphics Center
