On Wed, 2021-10-06 at 23:49 +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Streamline the code by using intel_de_rmw().
Reviewed-by: José Roberto de Souza <jose.so...@intel.com>
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 44 ++++++++++--------------
> 1 file changed, 18 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index ce8c85701cff..c7c86b497ebc 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -1070,14 +1070,11 @@ static void icl_ddi_combo_vswing_program(struct
> intel_encoder *encoder,
> for (ln = 0; ln < 4; ln++) {
> int level = intel_ddi_level(encoder, crtc_state, ln);
>
> - val = intel_de_read(dev_priv, ICL_PORT_TX_DW2_LN(ln, phy));
> - val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
> - RCOMP_SCALAR_MASK);
> - val |= SWING_SEL_UPPER(trans->entries[level].icl.dw2_swing_sel);
> - val |= SWING_SEL_LOWER(trans->entries[level].icl.dw2_swing_sel);
> - /* Program Rcomp scalar for every table entry */
> - val |= RCOMP_SCALAR(0x98);
> - intel_de_write(dev_priv, ICL_PORT_TX_DW2_LN(ln, phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_TX_DW2_LN(ln, phy),
> + SWING_SEL_UPPER_MASK | SWING_SEL_LOWER_MASK |
> RCOMP_SCALAR_MASK,
> +
> SWING_SEL_UPPER(trans->entries[level].icl.dw2_swing_sel) |
> +
> SWING_SEL_LOWER(trans->entries[level].icl.dw2_swing_sel) |
> + RCOMP_SCALAR(0x98));
> }
>
> /* Program PORT_TX_DW4 */
> @@ -1085,23 +1082,20 @@ static void icl_ddi_combo_vswing_program(struct
> intel_encoder *encoder,
> for (ln = 0; ln < 4; ln++) {
> int level = intel_ddi_level(encoder, crtc_state, ln);
>
> - val = intel_de_read(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy));
> - val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
> - CURSOR_COEFF_MASK);
> - val |=
> POST_CURSOR_1(trans->entries[level].icl.dw4_post_cursor_1);
> - val |=
> POST_CURSOR_2(trans->entries[level].icl.dw4_post_cursor_2);
> - val |= CURSOR_COEFF(trans->entries[level].icl.dw4_cursor_coeff);
> - intel_de_write(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy),
> + POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
> CURSOR_COEFF_MASK,
> +
> POST_CURSOR_1(trans->entries[level].icl.dw4_post_cursor_1) |
> +
> POST_CURSOR_2(trans->entries[level].icl.dw4_post_cursor_2) |
> +
> CURSOR_COEFF(trans->entries[level].icl.dw4_cursor_coeff));
> }
>
> /* Program PORT_TX_DW7 */
> for (ln = 0; ln < 4; ln++) {
> int level = intel_ddi_level(encoder, crtc_state, ln);
>
> - val = intel_de_read(dev_priv, ICL_PORT_TX_DW7_LN(ln, phy));
> - val &= ~N_SCALAR_MASK;
> - val |= N_SCALAR(trans->entries[level].icl.dw7_n_scalar);
> - intel_de_write(dev_priv, ICL_PORT_TX_DW7_LN(ln, phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_TX_DW7_LN(ln, phy),
> + N_SCALAR_MASK,
> + N_SCALAR(trans->entries[level].icl.dw7_n_scalar));
> }
> }
>
> @@ -1133,16 +1127,14 @@ static void icl_combo_phy_set_signal_levels(struct
> intel_encoder *encoder,
> * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
> */
> for (ln = 0; ln < 4; ln++) {
> - val = intel_de_read(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy));
> - val &= ~LOADGEN_SELECT;
> - val |= icl_combo_phy_loadgen_select(crtc_state, ln);
> - intel_de_write(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy),
> + LOADGEN_SELECT,
> + icl_combo_phy_loadgen_select(crtc_state, ln));
> }
>
> /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
> - val = intel_de_read(dev_priv, ICL_PORT_CL_DW5(phy));
> - val |= SUS_CLOCK_CONFIG;
> - intel_de_write(dev_priv, ICL_PORT_CL_DW5(phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_CL_DW5(phy),
> + 0, SUS_CLOCK_CONFIG);
>
> /* 4. Clear training enable to change swing values */
> val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN(0, phy));
