On Thu, Oct 03, 2013 at 11:35:46AM -0700, Jesse Barnes wrote: > DPIO needs to have common reset de-asserted on soft resets like boot and > S3. In some cases, the BIOS will have done this for us, but it should > be safe to do at runtime as well, as long as we do it when the pipes are > otherwise off. > > v2: update bit name to match docs better (Ville) > reset after CRI clock select (Ville) > > References: https://bugs.freedesktop.org/show_bug.cgi?id=69166 > Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org> > --- > drivers/gpu/drm/i915/i915_reg.h | 2 +- > drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++++++++ > 2 files changed, 23 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index 7ba263d7..ffa5b52 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -430,7 +430,7 @@ > #define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ > #define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ > #define DPIO_SFR_BYPASS (1<<1) > -#define DPIO_RESET (1<<0) > +#define DPIO_CMNRST (1<<0) > > #define _DPIO_TX3_SWING_CTL4_A 0x690 > #define _DPIO_TX3_SWING_CTL4_B 0x2a90 > diff --git a/drivers/gpu/drm/i915/intel_display.c > b/drivers/gpu/drm/i915/intel_display.c > index 9cba743..972f842 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -1360,6 +1360,26 @@ static void assert_pch_ports_disabled(struct > drm_i915_private *dev_priv, > assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID); > } > > +static void intel_init_dpio(struct drm_device *dev) > +{ > + struct drm_i915_private *dev_priv = dev->dev_private; > + > + if (!IS_VALLEYVIEW(dev)) > + return; > + > + /* > + * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - > + * 6. De-assert cmn_reset/side_reset. Same as VLV X0. > + * a. GUnit 0x2110 bit[0] set to 1 (def 0) > + * b. The other bits such as sfr settings / modesel may all be set > + * to 0. > + * > + * This should only be done on init and resume from S3 with both > + * PLLs disabled, or we risk losing DPIO and PLL synchronization. > + */ > + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); > +} > + > static void vlv_enable_pll(struct intel_crtc *crtc) > { > struct drm_device *dev = crtc->base.dev; > @@ -10379,6 +10399,8 @@ void intel_modeset_init_hw(struct drm_device *dev) > I915_WRITE(DPLL(1), I915_READ(DPLL(1)) | > DPLL_INTEGRATED_CRI_CLK_VLV); > > + intel_init_dpio(dev); > +
Since you're adding a new function the cri clock setup could be moved there as well. But whatever. Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com> > mutex_lock(&dev->struct_mutex); > intel_enable_gt_powersave(dev); > mutex_unlock(&dev->struct_mutex); > -- > 1.8.3.1 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
