On Thu, 26 Sep 2013 23:51:52 +0200 Daniel Vetter <dan...@ffwll.ch> wrote:
> On Thu, Sep 26, 2013 at 02:39:14PM -0700, Jesse Barnes wrote: > > This fixes resume on my test platform, since I think some DPIO bits need > > recalibration. > > > > References: https://bugs.freedesktop.org/show_bug.cgi?id=69166 > > Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org> > > --- > > drivers/gpu/drm/i915/intel_display.c | 13 +++++++++++++ > > 1 file changed, 13 insertions(+) > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c > > b/drivers/gpu/drm/i915/intel_display.c > > index f52e6d4..320f729 100644 > > --- a/drivers/gpu/drm/i915/intel_display.c > > +++ b/drivers/gpu/drm/i915/intel_display.c > > @@ -1359,6 +1359,17 @@ static void assert_pch_ports_disabled(struct > > drm_i915_private *dev_priv, > > assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID); > > } > > > > +static void intel_init_dpio(struct drm_device *dev) > > +{ > > + struct drm_i915_private *dev_priv = dev->dev_private; > > + > > + if (!IS_VALLEYVIEW(dev)) > > + return; > > + > > + /* Reset in case DPIO was stuck across suspend/resume or boot */ > > + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_RESET); > > +} > > + > > static void vlv_enable_pll(struct intel_crtc *crtc) > > { > > struct drm_device *dev = crtc->base.dev; > > @@ -10279,6 +10290,8 @@ void intel_modeset_init_hw(struct drm_device *dev) > > { > > intel_prepare_ddi(dev); > > > > + intel_init_dpio(dev); > > + > > intel_init_clock_gating(dev); > > Can't you just put this into the clock_gate function? I'd like to cut down > a bit on our general clutter in the setup code since tbh I've completely > lost the overview of what goes where ... Seemed more appropriate for modeset code, but of course it could go anywhere. -- Jesse Barnes, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
