On 8/25/21 3:58 AM, José Roberto de Souza wrote:
It started as a code style fix for the lines above 100 col but it
turned out to simplifications to intel_drrs_set_state().
Now it receives the desired refresh rate type, high or low.
Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
---
drivers/gpu/drm/i915/display/intel_drrs.c | 60 ++++++++---------------
1 file changed, 21 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_drrs.c
b/drivers/gpu/drm/i915/display/intel_drrs.c
index 1aa9793521158..5eb5033242575 100644
--- a/drivers/gpu/drm/i915/display/intel_drrs.c
+++ b/drivers/gpu/drm/i915/display/intel_drrs.c
@@ -91,7 +91,7 @@ intel_drrs_compute_config(struct intel_dp *intel_dp,
* intel_drrs_set_state - program registers for RR switch to take effect
* @dev_priv: i915 device
* @crtc_state: a pointer to the active intel_crtc_state
- * @refresh_rate: RR to be programmed
+ * @refresh_type: high or low refresh rate to be programmed
*
* This function gets called when refresh rate (RR) has to be changed from
* one frequency to another. Switches can be between high and low RR
@@ -102,19 +102,13 @@ intel_drrs_compute_config(struct intel_dp *intel_dp,
*/
static void intel_drrs_set_state(struct drm_i915_private *dev_priv,
const struct intel_crtc_state *crtc_state,
- int refresh_rate)
+ enum drrs_refresh_rate_type refresh_type)
{
struct intel_dp *intel_dp = dev_priv->drrs.dp;
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
+ struct drm_display_mode *mode;
- if (refresh_rate <= 0) {
- drm_dbg_kms(&dev_priv->drm,
- "Refresh rate should be positive non-zero.\n");
- return;
- }
-
- if (intel_dp == NULL) {
+ if (!intel_dp) {
drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
return;
}
@@ -130,15 +124,8 @@ static void intel_drrs_set_state(struct drm_i915_private
*dev_priv,
return;
}
- if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
- refresh_rate)
- index = DRRS_LOW_RR;
-
- if (index == dev_priv->drrs.refresh_rate_type) {
- drm_dbg_kms(&dev_priv->drm,
- "DRRS requested for previously set
RR...ignoring\n");
+ if (refresh_type == dev_priv->drrs.refresh_rate_type)
return;
- }
if (!crtc_state->hw.active) {
drm_dbg_kms(&dev_priv->drm,
@@ -147,7 +134,7 @@ static void intel_drrs_set_state(struct drm_i915_private
*dev_priv,
}
if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
- switch (index) {
+ switch (refresh_type) {
case DRRS_HIGH_RR:
intel_dp_set_m_n(crtc_state, M1_N1);
break;
@@ -164,7 +151,7 @@ static void intel_drrs_set_state(struct drm_i915_private
*dev_priv,
u32 val;
val = intel_de_read(dev_priv, reg);
- if (index > DRRS_HIGH_RR) {
+ if (refresh_type == DRRS_LOW_RR) {
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
else
@@ -178,10 +165,14 @@ static void intel_drrs_set_state(struct drm_i915_private
*dev_priv,
intel_de_write(dev_priv, reg, val);
}
- dev_priv->drrs.refresh_rate_type = index;
+ dev_priv->drrs.refresh_rate_type = refresh_type;
+ if (refresh_type == DRRS_LOW_RR)
+ mode = intel_dp->attached_connector->panel.fixed_mode;
+ else
+ mode = intel_dp->attached_connector->panel.downclock_mode;
For DRRS_LOW_RR refresh_type, panel.downclock_mode has to be used, and
for DRR_HIGH_RR, panel.fixed_mode has to be used.
It should be modified as follows.
if (refresh_type == DRRS_LOW_RR)
mode = intel_dp->attached_connector->panel.downclock_mode;
else
mode = intel_dp->attached_connector->panel.fixed_mode;
Except for this, the rest of the code looks good to me.
drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
- refresh_rate);
+ drm_mode_vrefresh(mode));
}
static void
@@ -229,13 +220,7 @@ intel_drrs_disable_locked(struct intel_dp *intel_dp,
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
- int refresh;
-
- refresh =
drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
- intel_drrs_set_state(dev_priv, crtc_state, refresh);
- }
-
+ intel_drrs_set_state(dev_priv, crtc_state, DRRS_HIGH_RR);
dev_priv->drrs.dp = NULL;
}
@@ -303,6 +288,7 @@ static void intel_drrs_downclock_work(struct work_struct *work)
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), drrs.work.work);
struct intel_dp *intel_dp;
+ struct drm_crtc *crtc;
mutex_lock(&dev_priv->drrs.mutex);
@@ -319,12 +305,8 @@ static void intel_drrs_downclock_work(struct work_struct *work)
if (dev_priv->drrs.busy_frontbuffer_bits)
goto unlock;
- if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
- struct drm_crtc *crtc =
dp_to_dig_port(intel_dp)->base.base.crtc;
-
- intel_drrs_set_state(dev_priv, to_intel_crtc(crtc)->config,
-
drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
- }
+ crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+ intel_drrs_set_state(dev_priv, to_intel_crtc(crtc)->config,
DRRS_LOW_RR);
unlock:
mutex_unlock(&dev_priv->drrs.mutex);
@@ -367,9 +349,9 @@ void intel_drrs_invalidate(struct drm_i915_private
*dev_priv,
dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
/* invalidate means busy screen hence upclock */
- if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
+ if (frontbuffer_bits)
intel_drrs_set_state(dev_priv, to_intel_crtc(crtc)->config,
-
drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
+ DRRS_HIGH_RR);
mutex_unlock(&dev_priv->drrs.mutex);
}
@@ -413,9 +395,9 @@ void intel_drrs_flush(struct drm_i915_private *dev_priv,
dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* flush means busy screen hence upclock */
- if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
+ if (frontbuffer_bits)
intel_drrs_set_state(dev_priv, to_intel_crtc(crtc)->config,
-
drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
+ DRRS_HIGH_RR);
/*
* flush also means no more activity hence schedule downclock, if all
