[Intel-gfx] [PATCH v2 17/19] drm/i915/dg2: use 128b/132b transcoder DDI mode

[Jani Nikula]

128b/132b has a separate transcoder DDI mode, which also requires the
MST transport select to be set. Note that we'll use DP MST also for
single-stream 128b/132b.

Having the FDI and 128b/132b modes share the register mode value
complicates things a bit.

v2:
- Use HAS_DP20 abstraction for 128b/132b mode (Ville)
- Use intel_dp_is_uhbr() helper

Bspec: 50493
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 27 ++++++++++++++++++------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c 
b/drivers/gpu/drm/i915/display/intel_ddi.c
index d885a4c0fb39..bbc2e052075d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -505,7 +505,10 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder 
*encoder,
                temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B;
                temp |= (crtc_state->fdi_lanes - 1) << 1;
        } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) {
-               temp |= TRANS_DDI_MODE_SELECT_DP_MST;
+               if (intel_dp_is_uhbr(crtc_state))
+                       temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B;
+               else
+                       temp |= TRANS_DDI_MODE_SELECT_DP_MST;
                temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
 
                if (DISPLAY_VER(dev_priv) >= 12) {
@@ -693,7 +696,12 @@ bool intel_ddi_connector_get_hw_state(struct 
intel_connector *intel_connector)
                break;
 
        case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
-               ret = type == DRM_MODE_CONNECTOR_VGA;
+               if (HAS_DP20(dev_priv))
+                       /* 128b/132b */
+                       ret = false;
+               else
+                       /* FDI */
+                       ret = type == DRM_MODE_CONNECTOR_VGA;
                break;
 
        default:
@@ -780,8 +788,9 @@ static void intel_ddi_get_encoder_pipes(struct 
intel_encoder *encoder,
                if ((tmp & port_mask) != ddi_select)
                        continue;
 
-               if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
-                   TRANS_DDI_MODE_SELECT_DP_MST)
+               if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == 
TRANS_DDI_MODE_SELECT_DP_MST ||
+                   (HAS_DP20(dev_priv) &&
+                    (tmp & TRANS_DDI_MODE_SELECT_MASK) == 
TRANS_DDI_MODE_SELECT_FDI_OR_128B132B))
                        mst_pipe_mask |= BIT(p);
 
                *pipe_mask |= BIT(p);
@@ -3572,9 +3581,6 @@ static void intel_ddi_read_func_ctl(struct intel_encoder 
*encoder,
                pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
                pipe_config->lane_count = 4;
                break;
-       case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
-               pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
-               break;
        case TRANS_DDI_MODE_SELECT_DP_SST:
                if (encoder->type == INTEL_OUTPUT_EDP)
                        pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
@@ -3603,6 +3609,13 @@ static void intel_ddi_read_func_ctl(struct intel_encoder 
*encoder,
                        pipe_config->infoframes.enable |=
                                intel_hdmi_infoframes_enabled(encoder, 
pipe_config);
                break;
+       case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
+               if (!HAS_DP20(dev_priv)) {
+                       /* FDI */
+                       pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
+                       break;
+               }
+               fallthrough; /* 128b/132b */
        case TRANS_DDI_MODE_SELECT_DP_MST:
                pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
                pipe_config->lane_count =
-- 
2.20.1