The MST code uses actual link rates in the limits struct, while the DP
code in general uses indexes to the ->common_rates[] array. Fix the
confusion by using actual link rate values everywhere. This is a better
abstraction than some obscure index.
Rename the struct members while at it to ensure all the places are
covered.
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 30 ++++++++++++---------
drivers/gpu/drm/i915/display/intel_dp.h | 2 +-
drivers/gpu/drm/i915/display/intel_dp_mst.c | 6 ++---
3 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
b/drivers/gpu/drm/i915/display/intel_dp.c
index 75d4ebc66941..d273b3848785 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1044,7 +1044,8 @@ intel_dp_adjust_compliance_config(struct intel_dp
*intel_dp,
intel_dp->num_common_rates,
intel_dp->compliance.test_link_rate);
if (index >= 0)
- limits->min_clock = limits->max_clock = index;
+ limits->min_rate = limits->max_rate =
+ intel_dp->compliance.test_link_rate;
limits->min_lane_count = limits->max_lane_count =
intel_dp->compliance.test_lane_count;
}
@@ -1058,8 +1059,8 @@ intel_dp_compute_link_config_wide(struct intel_dp
*intel_dp,
const struct link_config_limits *limits)
{
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
- int bpp, clock, lane_count;
- int mode_rate, link_clock, link_avail;
+ int bpp, i, lane_count;
+ int mode_rate, link_rate, link_avail;
for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
int output_bpp =
intel_dp_output_bpp(pipe_config->output_format, bpp);
@@ -1067,18 +1068,22 @@ intel_dp_compute_link_config_wide(struct intel_dp
*intel_dp,
mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
output_bpp);
- for (clock = limits->min_clock; clock <= limits->max_clock;
clock++) {
+ for (i = 0; i < intel_dp->num_common_rates; i++) {
+ link_rate = intel_dp->common_rates[i];
+ if (link_rate < limits->min_rate ||
+ link_rate > limits->max_rate)
+ continue;
+
for (lane_count = limits->min_lane_count;
lane_count <= limits->max_lane_count;
lane_count <<= 1) {
- link_clock = intel_dp->common_rates[clock];
- link_avail = intel_dp_max_data_rate(link_clock,
+ link_avail = intel_dp_max_data_rate(link_rate,
lane_count);
if (mode_rate <= link_avail) {
pipe_config->lane_count = lane_count;
pipe_config->pipe_bpp = bpp;
- pipe_config->port_clock = link_clock;
+ pipe_config->port_clock = link_rate;
return 0;
}
@@ -1212,7 +1217,7 @@ static int intel_dp_dsc_compute_config(struct intel_dp
*intel_dp,
* with DSC enabled for the requested mode.
*/
pipe_config->pipe_bpp = pipe_bpp;
- pipe_config->port_clock = intel_dp->common_rates[limits->max_clock];
+ pipe_config->port_clock = limits->max_rate;
pipe_config->lane_count = limits->max_lane_count;
if (intel_dp_is_edp(intel_dp)) {
@@ -1321,8 +1326,8 @@ intel_dp_compute_link_config(struct intel_encoder
*encoder,
/* No common link rates between source and sink */
drm_WARN_ON(encoder->base.dev, common_len <= 0);
- limits.min_clock = 0;
- limits.max_clock = common_len - 1;
+ limits.min_rate = intel_dp->common_rates[0];
+ limits.max_rate = intel_dp->common_rates[common_len - 1];
limits.min_lane_count = 1;
limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
@@ -1340,15 +1345,14 @@ intel_dp_compute_link_config(struct intel_encoder
*encoder,
* values correspond to the native resolution of the panel.
*/
limits.min_lane_count = limits.max_lane_count;
- limits.min_clock = limits.max_clock;
+ limits.min_rate = limits.max_rate;
}
intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i "
"max rate %d max bpp %d pixel clock %iKHz\n",
- limits.max_lane_count,
- intel_dp->common_rates[limits.max_clock],
+ limits.max_lane_count, limits.max_rate,
limits.max_bpp, adjusted_mode->crtc_clock);
if ((adjusted_mode->crtc_clock > i915->max_dotclk_freq ||
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h
b/drivers/gpu/drm/i915/display/intel_dp.h
index 680631b5b437..1345d588fc6d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -26,7 +26,7 @@ struct intel_dp;
struct intel_encoder;
struct link_config_limits {
- int min_clock, max_clock;
+ int min_rate, max_rate;
int min_lane_count, max_lane_count;
int min_bpp, max_bpp;
};
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 9859c0334ebc..d104441344c0 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -61,7 +61,7 @@ static int intel_dp_mst_compute_link_config(struct
intel_encoder *encoder,
int bpp, slots = -EINVAL;
crtc_state->lane_count = limits->max_lane_count;
- crtc_state->port_clock = limits->max_clock;
+ crtc_state->port_clock = limits->max_rate;
for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
crtc_state->pipe_bpp = bpp;
@@ -131,8 +131,8 @@ static int intel_dp_mst_compute_config(struct intel_encoder
*encoder,
* for MST we always configure max link bw - the spec doesn't
* seem to suggest we should do otherwise.
*/
- limits.min_clock =
- limits.max_clock = intel_dp_max_link_rate(intel_dp);
+ limits.min_rate =
+ limits.max_rate = intel_dp_max_link_rate(intel_dp);
limits.min_lane_count =
limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
--
2.20.1
