On Mon, Sep 16, 2013 at 02:14:47PM +0300, Jani Nikula wrote:
> On Fri, 13 Sep 2013, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > Extract the code to calculate the dotclock from the link clock and M/N
> > values into a new function from ironlake_crtc_clock_get().
> >
> > The new function can be used to calculate the dotclock for both FDI and
> > DP cases.
> >
> > Also simplify the code a bit along the way.
> >
> > v2: Don't forget about non-pch encoders in ironlake_crtc_clock_get()
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Reviewed-by: Jani Nikula <jani.nik...@intel.com>
>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 43
> > ++++++++++++++++++------------------
> > drivers/gpu/drm/i915/intel_drv.h | 2 ++
> > 2 files changed, 24 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index c0ee41c..13dea9b 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -7405,16 +7405,9 @@ static void i9xx_crtc_clock_get(struct intel_crtc
> > *crtc,
> > pipe_config->adjusted_mode.clock = clock.dot;
> > }
> >
> > -static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
> > - struct intel_crtc_config *pipe_config)
> > +int intel_dotclock_calculate(int link_freq,
> > + const struct intel_link_m_n *m_n)
intel_dotclock_calculate is an awfully generic name for something which
computes the dotclock for an fdi/dp link ... Maybe intel_dotclock_from_m_n
instead?
Patch merged since I don't want to block this any longer (and maybe it
makes more sense in the end, haven't checked).
Cheers, Daniel
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > - enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> > - int link_freq;
> > - u64 clock;
> > - u32 link_m, link_n;
> > -
> > /*
> > * The calculation for the data clock is:
> > * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
> > @@ -7425,6 +7418,18 @@ static void ironlake_crtc_clock_get(struct
> > intel_crtc *crtc,
> > * link_clock = (m * link_clock) / n
> > */
> >
> > + if (!m_n->link_n)
> > + return 0;
> > +
> > + return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
> > +}
> > +
> > +static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
> > + struct intel_crtc_config *pipe_config)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + int link_freq;
> > +
> > /*
> > * We need to get the FDI or DP link clock here to derive
> > * the M/N dividers.
> > @@ -7433,21 +7438,17 @@ static void ironlake_crtc_clock_get(struct
> > intel_crtc *crtc,
> > * For DP, it's either 1.62GHz or 2.7GHz.
> > * We do our calculations in 10*MHz since we don't need much precison.
> > */
> > - if (pipe_config->has_pch_encoder)
> > + if (pipe_config->has_pch_encoder) {
> > link_freq = intel_fdi_link_freq(dev) * 10000;
> > - else
> > - link_freq = pipe_config->port_clock;
> >
> > - link_m = I915_READ(PIPE_LINK_M1(cpu_transcoder));
> > - link_n = I915_READ(PIPE_LINK_N1(cpu_transcoder));
> > -
> > - if (!link_m || !link_n)
> > - return;
> > -
> > - clock = ((u64)link_m * (u64)link_freq);
> > - do_div(clock, link_n);
> > + pipe_config->adjusted_mode.clock =
> > + intel_dotclock_calculate(link_freq,
> > &pipe_config->fdi_m_n);
> > + } else {
> > + link_freq = pipe_config->port_clock;
> >
> > - pipe_config->adjusted_mode.clock = clock;
> > + pipe_config->adjusted_mode.clock =
> > + intel_dotclock_calculate(link_freq,
> > &pipe_config->dp_m_n);
> > + }
> > }
> >
> > /** Returns the currently programmed mode of the given pipe. */
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index c058f1b..6b97ac1 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -805,5 +805,7 @@ extern void intel_aux_display_runtime_put(struct
> > drm_i915_private *dev_priv);
> > extern void i915_disable_vga_mem(struct drm_device *dev);
> > extern void intel_dp_get_m_n(struct intel_crtc *crtc,
> > struct intel_crtc_config *pipe_config);
> > +extern int intel_dotclock_calculate(int link_freq,
> > + const struct intel_link_m_n *m_n);
> >
> > #endif /* __INTEL_DRV_H__ */
> > --
> > 1.8.1.5
> >
>
> --
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
